Major Areas: (click to go to section)

 

Additive Manufacturing

  • Nasiri, M. T., & Movahhedy, M. R. (2022). A new design of continuous coaxial nozzle for direct metal deposition process to overcome the gravity effect. Progress in Additive Manufacturing, 7(2), 173-186.

  • Mohammadi, K., Movahhedy, M. R., & Khodaygan, S. (2021). Colloidal particle reaction and aggregation control in the Electrohydrodynamic 3D printing technology. International Journal of Mechanical Sciences, 195, 106222.

  • Arafi, A., Akbari, A., Mohammadi, K., & Movahhedy, M. R. (2021, November). Fabrication of flexible strain sensors using electrohydrodynamically printed silver nanowires. In 2021 28th National and 6th International Iranian Conference on Biomedical Engineering (ICBME) (pp. 51-57). IEEE.

  • Mohammadi, K., Movahhedy, M. R., Shishkovsky, I., & Hedayati, R. (2020). Hybrid anisotropic pentamode mechanical metamaterial produced by additive manufacturing technique. Applied Physics Letters, 117(6), 061901.

  • Mohammadi, K., Movahhedy, M. R., & Khodaygan, S. (2019). A multiphysics model for analysis of droplet formation in electrohydrodynamic 3D printing process. Journal of Aerosol Science, 135, 72-85.

  • Manshoori Yeganeh, A., Movahhedy, M. R., & Khodaygan, S. (2019). An efficient scanning algorithm for improving accuracy based on minimising part warping in selected laser sintering process. Virtual and Physical Prototyping, 14(1), 59-78

  • Ghorashi, M. S., Farrahi, G. H., & Movahhedy, M. R. (2019). Effect of severe shot peening on the fatigue life of the laser-cladded Inconel 718 specimens. The International Journal of Advanced Manufacturing Technology, 104(5), 2619-2631.

  • Ghorashi, M. S., Farrahi, G. H., & Movahhedy, M. R. (2019). Considering cyclic plasticity to predict residual stresses in laser cladding of Inconel 718 multi bead samples. Journal of Manufacturing Processes, 42, 149-158.

  • Manshoori Yeganeh, A., Khodaygan, S., & Movahhedy, M. R. (2019). Optimized thermal gradient by changing temperature parameters for laser-assisted additive manufacturing process based on polyamide-12 powder using numerical model. Iranian Journal of Manufacturing Engineering, 5(4), 26-36.

  • .Dastjerdi, A. A., Movahhedy, M. R., & Akbari, J. (2017). Optimization of process parameters for reducing warpage in selected laser sintering of polymer parts. Additive Manufacturing, 18, 285-294.

Top

Machining Process and Machine tool Dynamics

  • Mahboubkhah, M., Movahhedy, M. R., & Jodeiri Feizi, A. (2022). Three dimensional prediction of stability lobes in end milling of thin-walled structures based on tool and workpiece dimensions. Scientia Iranica, 29(1), 41-52.

  • Roostai, H., & Movahhedy, M. R. (2020). Dynamic modeling of the turning process of slip-cast fused silica ceramics using the discrete element method. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 234(3), 629-640.

  • Hesabi Hesari, A., Moradi, H., & Movahhedy, M. R. (2020). Modeling and active control of chatter vibrations of piezoelectric stacked machining arm in micro-turning process. Meccanica, 55(9), 1707-1731.

  • Ghorbani, M., & Movahhedy, M. R. (2019). An analytical model for cutter-workpiece engagement calculation in ball-end finish milling of doubly curved surfaces. The International Journal of Advanced Manufacturing Technology, 102(5), 1635-1657

  • Ghorbani, M., & Movahhedy, M. R. (2019). Extraction of surface curvatures from tool path data and prediction of cutting forces in the finish milling of sculptured surfaces. Journal of Manufacturing Processes, 45, 273-289.

  • Ghorbani, M., & Movahhedy, M. R. (2019). Investigating the effect of sculptured surface curvatures on milling forces. Iranian Journal of Manufacturing Engineering, 6(6), 34-43.

  • Mirshamsi, S. M. A., Movahhedy, M. R., & Khodaygan, S. (2019). Experimental modeling and optimizing process parameters in the laser assisted machining of silicon carbide particle-reinforced aluminum matrix composites. Materials Research Express, 6(8), 086591.

  • Roostai, H., Movahhedy, M. R., & Shoja Razavi, R. (2019). Experimental and numerical study of low frequency pulsed Nd: YAG laser heating of slip cast fused silica ceramics for laser assisted turning process considering laser beam overlapping. Scientia Iranica, 26(1), 394-407.

  • Jafarzadeh, E., Movahhedy, M. R., Khodaygan, S., & Ghorbani, M. (2018). Prediction of machining chatter in milling based on dynamic FEM simulations of chip formation. Advances in Manufacturing, 6(3), 334-344.

  • Jafarzadeh, E., & Movahhedy, M. R. (2017). Numerical simulation of interaction of mode-coupling and regenerative chatter in machining. Journal of Manufacturing Processes, 27, 252-260.

  • Kashani, M. M., Movahhedy, M. R., Ahmadian, M. T., & Razavi, R. S. (2017). Analytical solution of transient three-dimensional temperature field in a rotating cylinder subject to a localized laser beam. Journal of Heat Transfer, 139(6).

  • Kashani, M. M., Movahhedy, M. R., Ahmadian, M. T., & Razavi, R. S. (2017). In-process determination of laser beam absorption coefficient for laser-assisted turning processes. The International Journal of Advanced Manufacturing Technology, 92(5), 2929-2938.

  • Chamani, M., Farrahi, G. H., & Movahhedy, M. R. (2016). Molecular dynamics simulation of nanoindentation of nanocrystalline Al/Ni multilayers. Computational Materials Science, 112, 175-184.

  • Najafi, A., Movahhedy, M. R., Zohoor, H., & Alasty, A. (2016). Dynamic stability of a Hexaglide machine tool for milling processes. The International Journal of Advanced Manufacturing Technology, 86(5), 1753-1762.

  • Mojtahedzade Farabi, A. H., Akbari, J., & Movahhedy, M. R. (2016). Simulation of 2D vibration fixture for ultrasonic vibration assisted of grinding. Modares Mechanical Engineering, 15(13), 296-300.

  • Roostaei, H., & Movahhedy, M. R. (2016). Analysis of heat transfer in laser assisted machining of slip cast fused silica ceramics. Procedia CIRP, 46, 571-574.

  • Kashani, M. M., Movahhedy, M. R., Ahmadian, M. T., & Razavi, R. S. (2016). Analytical prediction of the temperature field in laser assisted machining. Procedia CIRP, 46, 575-578.

  • Molaie, M. M., Akbari, J., & Movahhedy, M. R. (2016). Ultrasonic assisted grinding process with minimum quantity lubrication using oil-based nanofluids. Journal of cleaner production, 129, 212-222.

  • Molaie, M. M., Zarei, M., Akbari, J., & Movahhedy, M. R. (2016). Cutting Fluid effect in Minimum Quantity Lubrication (MQL) of Ultrasonic–Assisted Grinding (UAG). Modares Mechanical Engineering, 15(13), 301-305.

  • Razban, M., & Movahhedy, M. R. (2015). A speed-dependent variable preload system for high speed spindles. Precision Engineering, 40, 182-188.

  • Moradi, H., Vossoughi, G., Behzad, M., & Movahhedy, M. R. (2015). Vibration absorber design to suppress regenerative chatter in nonlinear milling process: Application for machining of cantilever plates. Applied Mathematical Modelling, 39(2), 600-620.

  • Tavari, H., Jalili, M. M., & Movahhedy, M. R. (2015). Nonlinear analysis of chatter in turning process using dimensionless groups. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 37(4), 1151-1162.

  • Hajmohammadi, M. S., Movahhedy, M. R., & Moradi, H. (2014). Investigation of thermal effects on machining chatter based on FEM simulation of chip formation. CIRP Journal of Manufacturing Science and Technology, 7(1), 1-10.

  • Tajalli, S. A., Movahhedy, M. R., & Akbari, J. (2014). Chatter instability analysis of spinning micro-end mill with process damping effect via semi-discretization approach. Acta Mechanica, 225(3), 715-734.

  • Tajalli, S. A., Movahhedy, M. R., & Akbari, J. (2013). Size dependent vibrations of micro-end mill incorporating strain gradient elasticity theory.Journal of Sound and Vibration, 332(15), 3922-3944.

  • Moradi, H., Vossoughi, G., Movahhedy, M. R., & Ahmadian, M. T. (2013). Forced vibration analysis of the milling process with structural nonlinearity, internal resonance, tool wear and process damping effects. International Journal of Non-Linear Mechanics, 54, 22-34.

  • Moradi, H., Vossoughi, G., Movahhedy, M. R., & Salarieh, H. (2013). Suppression of nonlinear regenerative chatter in milling process via robust optimal control. Journal of Process Control, 23(5), 631-648.

  • Moradi, H., Vossoughi, G., & Movahhedy, M. R. (2013). Experimental dynamic modelling of peripheral milling with process damping, structural and cutting force nonlinearities. Journal of Sound and Vibration, 332(19), 4709-4731.

  • Rezaei, M. M., Movahhedy, M. R., Moradi, H., & Ahmadian, M. T. (2012). Extending the inverse receptance coupling method for prediction of tool-holder joint dynamics in milling. Journal of Manufacturing Processes, 14(3), 199-207.

  • Moradi, H., Movahhedy, M. R., & Vossoughi, G. (2012). Tunable vibration absorber for improving milling stability with tool wear and process damping effects. Mechanism and Machine Theory, 52, 59-77.

  • Moradi, H., Movahhedy, M. R., & Vossoughi, G. (2012). Bifurcation analysis of milling process with tool wear and process damping: regenerative chatter with primary resonance. Nonlinear Dynamics, 70(1), 481-509.

  • Moradi, H., Movahhedy, M. R., & Vossoughi, G. (2012). Dynamics of regenerative chatter and internal resonance in milling process with structural and cutting force nonlinearities. Journal of Sound and Vibration, 331(16), 3844-3865.

  • Moradi, H., Bakhtiari-Nejad, F., Movahhedy, M. R., & Vossoughi, G. (2012). Stability improvement and regenerative chatter suppression in nonlinear milling process via tunable vibration absorber. Journal of Sound and Vibration, 331(21), 4668-4690.

  • Zahedi, A., & Movahhedy, M. R. (2012). Thermo-mechanical modeling of high speed spindles. Scientia Iranica, 19(2), 282-293.

  • Mahnama, M., & Movahhedy, M. R. (2012). Application of FEM simulation of chip formation to stability analysis in orthogonal cutting process. Journal of Manufacturing Processes, 14(3), 188-194.

  • Mahnama, M., & Movahhedy, M. R. (2010). Prediction of machining chatter based on FEM simulation of chip formation under dynamic conditions.International journal of machine tools and manufacture, 50(7), 611-620. 

  • Moradi, H., Movahhedy, M. R., & Vossoughi, G. (2010, January). Linear and nonlinear model of cutting forces in peripheral milling: a comparison between 2D and 3D models. In ASME 2010 International Mechanical Engineering Congress and Exposition (pp. 955-962). American Society of Mechanical Engineers.

  • Moradi, Hamed, Mohammad R. Movahhedy, and Gholamreza Vossoughi. "Sliding mode control of machining chatter in the presence of tool wear and parametric uncertainties." Journal of Vibration and Control 16, no. 2 (2010): 231-251.

  • Moradi, H., Bakhtiari-Nejad, F., Movahhedy, M. R., & Ahmadian, M. T. (2010). Nonlinear behaviour of the regenerative chatter in turning process with a worn tool: Forced oscillation and stability analysis. Mechanism and Machine Theory, 45(8), 1050-1066.

  • Moradi, H., Movahhedy, M. R., & Vossoughi, G. R. (2009). Robust control strategy for suppression of regenerative chatter in turning. Journal of Manufacturing Processes, 11(2), 55-65.

  • Movahhedy, M. R., & Zahedi, A. (2009). An investigation of contact angles in angular contact ball bearings accounting for high speed effects and preload. SAE International Journal of Passenger Cars-Mechanical Systems,2(1), 780-790.

  • Moradi, H., Bakhtiari-Nejad, F., & Movahhedy, M. R. (2008). Tuneable vibration absorber design to suppress vibrations: An application in boring manufacturing process. Journal of Sound and Vibration, 318(1), 93-108.

  • Movahhedy, M.R. and Mosaddegh, P., (2006), “Prediction of chatter in high speed milling including gyroscopic effects”, Int. Journal of Machine Tools and Manufacture, to appear.

  • Movahhedy, M.R. and Gerami, J.M., (2006), “Prediction of spindle dynamics in milling by sub-structure coupling”, Int. Journal of Machine Tools and Manufacture, Vol. 46, pp. 243-251.

  • Park, S.S., Altintas, Y. and Movahhedy, M.R., (2003), “Receptance Coupling for End Mills”, Int. Journal of Machine Tools and Manufacture, Vol. 43, pp. 889-896.

Top

Simulation of Forming and Machining Processes

  • Afrasiab, M., Afrasiab, H., Movahhedy, M. R., & Faraji, G. (2015). Design of the Die Profile for the Incremental Radial Forging Process. Iranian Journal of Science and Technology. Transactions of Mechanical Engineering, 39(M1), 89.

  • Tajalli, S. A., Movahhedy, M. R., & Akbari, J. (2014). Simulation of orthogonal micro-cutting of FCC materials based on rate-dependent crystal plasticity finite element model. Computational Materials Science, 86, 79-87.

  • Beni, Y. T., & Movahhedy, M. R. (2010). Consistent arbitrary Lagrangian Eulerian formulation for large deformation thermo-mechanical analysis.Materials & Design, 31(8), 3690-3702.

  • Beni, Y. T., Movahhedy, M. R., & Farrahi, G. H. (2010). A COMPLETE TREATMENT OF THERMO-MECHANICAL ALE ANALYSIS; PART I: FORMULATION*. Iranian Journal of Science and Technology, 34(B2), 135.

  • Beni, Y. T., Movahhedy, M. R., & Farrahi, G. H. (2009). Rate-dependent dynamic ALE analysis of finite deformation of elasto-viscoplastic solids.Materials & Design, 30(8), 2995-3004.

  • Hosseinian, E., Farrahi, G. H., & Movahhedy, M. R. (2009). An analytical framework for the solution of autofrettaged tubes under constant axial strain condition. Journal of Pressure Vessel Technology, 131(6), 061201.

  • Ghaei, A., Movahhedy, M. R., & Taheri, A. K. (2008). Finite element modelling simulation of radial forging of tubes without mandrel. Materials & Design, 29(4), 867-872.

  • Bihamta, R., Movahhedy, M. R., & Mashreghi, A. R. (2007). A numerical study of swage autofrettage of thick-walled tubes. Materials & design, 28(3), 804-815.

  • Ameli, A., & Movahhedy, M. R. (2007). A parametric study on residual stresses and forging load in cold radial forging process. The International Journal of Advanced Manufacturing Technology, 33(1-2), 7-17.

  • Ghaei, A., & Movahhedy, M. R. (2007). Die design for the radial forging process using 3D FEM. Journal of materials processing technology, 182(1), 534-539.

  • Bihamta, R., Ameli, A., Movahhedy, M. R., & Mashregi, A. (2007). A comparative study on the radial and indentation forging of thick-walled tubes.International Journal of Forming Processes, 10(2), 179.

  • Ghaei, A., Taheri, A. K., & Movahhedy, M. R. (2006). A new upper bound solution for analysis of the radial forging process. International Journal of Mechanical Sciences, 48(11), 1264-1272.

  • Bihamta, R., Movahhedy, M. R.,  Masherghi, A.R., (2006), "A Numerical Study of Swage Autofrettage of Thick-Walled  Tubes", Journal of Materials and Design, To appear.

  • Afrasiab, H., & Movahhedy, M. R. (2006, January). Generalized slab method analysis of radial forging with a general curved shape die. In ASME 8th Biennial Conference on Engineering Systems Design and Analysis (pp. 883-889). American Society of Mechanical Engineers.

  • Ghaei, A., Movahhedy, M.R., and Karimi Taheri, A., (2005),  “Study of the Effects of Die Geometry on the Deformation in the Radial Forging Process”, Journal of Materials Processing Technology, Vol. 170, pp. 156-163

  • Movahhedy, M.R. , Altintas, Y., and Gadala, M.S., (2002) “Numerical Analysis of Metal Cutting with Chamfered and Blunt Tools”, Transactions of ASME Journal of Manufacturing Science and Engineering, Vol. 124, pp.178-186.

  • Gadala, M.S., Movahhedy, M.R. and Wang, J.  (2002), “On the Mesh Motion in ALE Simulation of Metal Forming Processes”, Finite Element in Analysis and Design, Vol. 38, pp. 435-459.

  • Movahhedy, M.R., Gadala, M.S., and Altintas, Y., (2000), “Simulation of Chip Formation in Orthogonal Metal Cutting Process; An ALE Finite Element Approach”, Machining Science and Technology, Vol. 4, pp.15-42.

  • Movahhedy, M.R., Gadala, M.S., and Altintas, Y., (2000) “Simulation of Orthogonal Metal Cutting Process Using an Arbitrary Lagrangian-Eulerian Finite Element Method”, Journal of Materials Processing Technology, v. 103, pp.267-275.

Top

Tolerance Analysis

  • Khodaygan, S., & Movahhedy, M. R. (2016). A comprehensive fuzzy feature-based method for worst case and statistical tolerance analysis. International Journal of Computer Integrated Manufacturing, 29(1), 42-63.

  • Aghabeigi, M., & Movahhedy, M. R. (2014). An algorithm for geometrical uncertainty analysis in planar truss structures. Structural and Multidisciplinary Optimization, 49(2), 225-238.

  • Khodaygan, S., & Movahhedy, M. R. (2014). Functional process capability analysis in mechanical systems. The International Journal of Advanced Manufacturing Technology, 73(5-8), 899-912.

  • Khodaygan, S., & Movahhedy, M. R. (2012). Fuzzy-based analysis of process capability for assembly quality assessment in mechanical assemblies. International Journal of Production Research, 50(12), 3395-3415.

  • Khodaygan, S., & Movahhedy, M. R. (2011). Tolerance analysis of assemblies with asymmetric tolerances by unified uncertainty–accumulation model based on fuzzy logic. The International Journal of Advanced Manufacturing Technology, 53(5-8), 777-788.

  • Khodaygan, S., Movahhedy, M. R., & Foumani, M. S. (2011). Fuzzy-small degrees of freedom representation of linear and angular variations in mechanical assemblies for tolerance analysis and allocation. Mechanism and Machine Theory, 46(4), 558-573.

  • Khodaygan, S., Movahhedy, M. R., & Fomani, M. S. (2010). Tolerance analysis of mechanical assemblies based on modal interval and small degrees of freedom (MI-SDOF) concepts. The International Journal of Advanced Manufacturing Technology, 50(9-12), 1041-1061.

  • Movahhedy, M. R., & Khodaygan, S. (2007). Tolerance analysis of mechanical assemblies with asymmetric tolerances. Trans SAE J Materials Manuf, 116, 44-52.

Top

Design and Other Topics

  • Shamloofard, M., Hosseinzadeh, A., & Movahhedy, M. R. (2021). Development of a shell superelement for large deformation and free vibration analysis of composite spherical shells. Engineering with Computers, 37(4), 3551-3567.

  • Amid, R., Kadkhodazadeh, M., Ardakani, M. R. T., Movahhedy, M. R., Mirakhori, M., Hakimi, A., & Broukhim, M. (2021). Comparison of periodontally compromised splinted teeth and implant supported fixed partial denture: A three-dimensional finite element analysis on bone response. Journal of long-term effects of medical implants, 31(2).

  • Golmohammadi, S., Eskandari, A., Movahhedy, M. R., Shirmohammadi, A., & Amid, R. (2018). The effect of microthread design on magnitude and distribution of stresses in bone: A three-dimensional finite element analysis. Dental Research Journal, 15(5), 347.

  • Sazgar, A., Movahhedy, M. R., Mahnama, M., & Sohrabpour, S. (2017). Development of a molecular dynamic based cohesive zone model for prediction of an equivalent material behavior for Al/Al2O3 composite. Materials Science and Engineering: A, 679, 116-122.

  • Chamani, M., Farrahi, G. H., & Movahhedy, M. R. (2017). Friction behavior of nanocrystalline nickel near the Hall-Petch breakdown. Tribology International, 107, 18-24.

  • Keikhaie, M., Movahhedy, M. R., Akbari, J., & Alemohammad, H. (2016). Numerical study of material properties, residual stress and crack development in sintered silver nano-layers on silicon substrate. Scientia Iranica, 23(3), 1037-1047.

  • Sazgar, A., Movahhedy, M. R., Mahnama, M., & Sohrabpour, S. (2015). A molecular dynamics study of bond strength and interface conditions in the Al/Al2O3 metal–ceramic composites. Computational Materials Science, 109, 200-208.

  • Mojaddam, M., Hajilouy-Benisi, A., Moussavi-Torshizi, S. A., Movahhedy, M. R., & Durali, M. (2014). Experimental and numerical investigations of radial flow compressor component losses. Journal of Mechanical Science and Technology, 28(6), 2189-2196.

  • Mojaddam, M., Hajilouy-Benisi, A., & Movahhedy, M. R. (2014, June). Optimal design of the volute for a turbocharger radial flow compressor. In ASME Turbo Expo 2014: Turbine Technical Conference and Exposition (pp. V02DT42A037-V02DT42A037). American Society of Mechanical Engineers.

  • Mahnama, M., Naghdabadi, R., & Movahhedy, M. R. (2013). Atomistic investigation of phase transition in solid argon induced by shock wave transmission. Phase Transitions, 86(8), 838-853.

  • Afrasiab, H., Movahhedy, M. R., & Assempour, A. (2012). Fluid–structure interaction analysis in microfluidic devices: A dimensionless finite element approach. International Journal for Numerical Methods in Fluids, 68(9), 1073-1086.

  • Afrasiab, H., Movahhedy, M. R., & Assempour, A. (2011). Finite element and analytical fluid-structure interaction analysis of the pneumatically actuated diaphragm microvalves. Acta mechanica, 222(1-2), 175-192.

  • Movahhedy, M.R., Ismail, F. and Gladwell, G.M.L. (1995), “Reconstruction of a mass-spring system from spectral data, Part II: experiment", Inverse Problems in Engineering, v.1, pp.315-327.

  • Gladwell, G.M.L. and Movahhedy, M.R., (1995), “Reconstruction of a mass-spring system from spectral data, Part I: Theory, Inverse Problems in Engineering, v.1, pp. 179-189.

 

Top

 

Last update: May 10, 2022