Dr. Mohamad Mehdi Ahmadi's Homepage
    Sharif Univ.

Publications

                    Books

                  • “Engineer to Entrepreneur ” Ahmadi, M.M., By: Rick De La Guardia, Translated to Farsi by Ahmadi, M.M., published by Ketabedanshgahi Publications, October 2023.
                  • “Matlab in Civil Engineering ” Ahmadi, M.M. and Tabiee, M. published by Kian Publications, November 2022.
                  • “Mechanics of Materials for Dummies ” Ahmadi, M.M., Yazdani, M., Elyasi, P., and Khaksar K. By: J.H. Allen, Translated to Farsi by Ahmadi, M.M. et al., published by Sharif University Publication Institute, September 2022.
                  • “Prezi Essentials ” Ahmadi, M.M., Farin Mehr, R., Heidari, T., and Hosseini, M. By: Domi Sinclair, Translated to Farsi by Ahmadi, M.M. et al., published by Sharif University Publication Institute, December 2021.
                  • “Geotechnical Earthquake Engineering Handbook ” Ahmadi, M.M., By: Robert W. Day, Translated to Farsi by Ahmadi, M.M., published by Sharif University Publication Institute, April 2014.
                  • “Manual for the Preparation of Geotechnical Reports ” Centre for Geotechnical Studies, Tehran Municipality, May 2013. Farhadi, A., Ahmadi, M.M., Farhang, A., and Taghavi, A.
                  • “Let’s Reduce Earthquake Hazards ”, Public Awareness Department, International Institute of Earthquake Engineering and Seismology (IIEES), (in Farsi). Ahmadi M.M., Hossein Nazer M., and Rezaie Panah N. (1991)

                    Journal papers

                  • Analysis of pile end bearing capacity in Holocene interlayered silty deposits based on CPT soil behavior type index
                    Engineering Geology, Vol 337, 107597, Doi.org/10.1016/j.enggeo.2024. 107597.
                    Khodayari M.R., Mousavizadeh S.M., and Ahmadi M.M. (2024)

                  • Effects of loading frequency on soil-pile interaction using numerical nonlinear three-dimensional analyses
                    International Journal of Geomechanics, ASCE, Doi: 10.1061/IJGNAI.GMENG-10119
                    Ahmadi M.M., Hadei S., Afsaneh Borzeshi S., Hokmabadi A. (2024)

                  • Determining saturated clay parameters using CPT and the modified Cam Clay model: Overconsolidation ratio and effective friction angle
                    Journal of Geotechnical and Geological Engineering, Vol? Doi.org/10.1007/ s10706-024-02853-x
                    Keshmiri E., and Ahmadi M.M. (2024)

                  • Numerical modeling and analysis of the effect of surface groundwater flow and natural convection on the heat exchange of energy piles
                    Amirkabir Journal of Civil Engineering, Doi: 10.22060/ceej.2024.23014.8089
                    Fattahian, M., Sobhdam, M.H., and Ahmadi M.M. (2024)

                  • Investigation of excess pore water pressure in cone penetration test in saturated clayey soils under undrained condition
                    Amirkabir Journal of Civil Engineering, Doi: 10.22060/ceej.2024.22402.7975
                    Ahmadi M.M., and Fakhimi Akmal M. (2024)

                  • Numerical study of the piezocone test in sandy soil under different drainage conditions using a hypoplastic constitutive model
                    International Journal of Geomechanics, ASCE, Doi: 10.1061/IJGNAI.GMENG-8812.
                    Mashinchian M.J. and Ahmadi M.M. (2023)

                  • Nonlinear Three-Dimensional Numerical Study of Pile Seismic Behavior: Effect of Pile Geometrical Parameters
                    Amirkabir Journal of Civil Engineering, 55(9) pp. 1863-1882 Doi: 10.22060/ceej.2023.21398.7715
                    Hadei S., and Ahmadi M.M. (2023)

                  • Numerical investigation of the effects of thermal expansion coefficient of pile and soil on the mechanical response of energy pile
                    Amirkabir Journal of Civil Engineering, 55(2) pp. 279-300, Doi: 10.22060/ceej.2022.21718. 7807
                    Sadeghzadeh, M.R. and Ahmadi M.M. (2023)

                  • Numerical modeling of mixed convection near a vertical heat source in saturated granular soils
                    Geothermics, doi: 10.1016/j.geothermics.2022.102566
                    Mehraeen, N. Ahmadi M.M., Ghasemi-Fare, O. (2022)

                  • Self CPTu measurements for determining Su and OCR in clay soils: Simulation and practical applications
                    International Journal of Geomechanics, ASCE, doi: 10.1061/(ASCE)GM.1943-5622.
                    Khodayari M.R. and Ahmadi M.M. (2022)

                  • Performance of Open and In-filled (Geofoam) Trenches in Mitigating Ground-Borne Vibrations Induced by Impact Loading
                    International Journal of Pavement Research and Technology, doi: 10.1007/s42947-022-00159-w.
                    Jazebi, M., Ahmadi, M.M., Saberian, M., Li, J., and Sahebalzamani, P. (2022)

                  • A numerical study of piezocone test in Firoozkooh sandy soil under different drained conditions
                    Amirkabir Journal of Civil Engineering. doi: 10.22060CEEJ.2022.21082.7611 (in Farsi).
                    Ahmadi, M.M., and Mashinchian, M.J. (2022)

                  • Slope stability of an unsaturated embankment with and without natural pore water salinity subjected to rainfall infiltration
                    Rock and Soil Mechanics.
                    Sadeghi, H., Kolahdooz, A., and Ahmadi, M.M. (2022)

                  • Reliability analysis of pile bearing capacity in clayey soils based on Monte Carlo sampling
                    Amirkabir Journal of Civil Engineering. doi: 10.22060CEEJ.2022.20268.7387 (in Farsi).
                    Ahmadi, M.M., and Mashinchian, M.J. (2022)

                  • Efficiency of in-filled (geofoam) trenches in mitigating train-induced vibrations: A case study of Tehran-Tabriz railway
                    Construction and Building Materials, doi: 10.1016/j.conbuildmat. 2021.125075
                    Jazebi, M., Ahmadi, M.M., and Sahebzamani, P. (2021)

                  • Shear Strength characteristics of a thermally cured sand–bentonite mixture
                    Scientia Iranica, Transactions A: Civil Engineering, vol. 28(6), pp. 3035-3045, doi: 10.24200/sci.2021.56550.4782.
                    Shirasb A., Hamidi A., and Ahmadi M.M. (2021)

                  • Drilled shafts in sand: Failure pattern and tip resistance using numerical and analytical approaches
                    International Journal of Geotechnical Engineering, doi: 10.1080/19386362.2021.2003991
                    Jazebi, M., and Ahmadi, M.M. (2021)

                  • Interpretation of CPT in unsaturated sands under drained conditions: A numerical study
                    International Journal for Numerical and Analytical Methods in Geomechanics, doi: 10.1002/(ISSN) 1096-9853
                    Keshmiri E., and Ahmadi M.M. (2021)

                  • In-situ state of tailing silts using a numerical model of piezocone penetration test developed by Norsand model
                    International Journal of Geomechanics, ASCE, doi: 10.1061/(ASCE)GM.1943-5622.0002250.
                    Pezeshki, A., Ahmadi, M.M. (2021)

                  • Pressuremeter test in unsaturated soils: a numerical study
                    SN Applied Sciences,doi: 10.1007/s42452-021-04416-8.
                    Keshmiri E., and Ahmadi M.M. (2021)

                  • Generation and dissipation of excess pore water pressure during CPTu in clayey soils: A numerical approach
                    Geotechnical and Geological Engineering Journal, Vol., No., pp., doi: 10.1007/s10706-021-01716z.
                    Golestani Dariani, A. A. and Ahmadi, M. M. (2021)

                  • Excess pore-water pressure along the friction sleeve of a piezocone penetrating in clay: A numerical study
                    International Journal of Geomechanics, ASCE, doi: 10.1061/(ASCE)GM. 1943-5622.0001702.
                    Khodayari M.R. and Ahmadi M.M. (2020)

                  • Consolidation characteristics of a thermally cured sand–bentonite mixture
                    SN Applied Sciences, 2:1116, doi: 10.1007/s42452-020-2932-8
                    Shirasb A., Hamidi A., and Ahmadi M.M. (2020)

                  • Parametric study of kinematic interaction in pile-cohesive soil under dynamic loads
                    Accepted for publication in Amirkabir Journal of Civil Engineering, 53(7), 67-79, doi: 10.22060/ceej.2020.17487.6580 (in Farsi).
                    Ahmadi M.M., Mashinchian M.J., and Hadei S. (2020)

                  • Three-dimensional numerical analysis of corner effect of an excavation supported by ground anchors
                    International Journal of Geotechnical Engineering, doi: 10.1080/19386362.2019.1682349
                    Ahmadi, A. and Ahmadi, M. M. (2019)

                  • CPT cone factor: Numerical-analytical approach
                    ASCE Journal of Geomechanics, doi: 10.1061/(ASCE)GM.1943-5622.0001521.
                    Golestani Dariani, A. A. and Ahmadi, M. M. (2019)

                  • A numerical approach on side resistance of drilled shafts embedded in sandy soils
                    International Journal of Geotechnical Engineering, doi: 10.1080/19386362.2019.1655984
                    Jazebi, M. and Ahmadi, M.M. (2019)

                  • An improvement in the determination of end bearing capacity of drilled shafts in sand
                    Journal of GeoEngineering, Vol. 14, No. 2, 109-119, doi: 10.6310/jog.201906_14(2).6
                    Ahmadi M.M and Jazebi M. (2019)

                  • A numerical approach on bearing capacity of drilled Shafts embedded in clay
                    Journal of Engineering Geology, Kharazmi University.
                    Jazebi M. and Ahmadi M.M. (2018)

                  • Undrained shear strength and in-situ horizontal effective stress from piezocone penetration test measurements in clayey soils: A new approach
                    ASCE Journal of Geomechanics, doi: 10.1061/(ASCE)GM. 1943-5622.0001210
                    Golestani Dariani A. A. and Ahmadi M. M. (2018)

                  • Numerical investigation of the static behavior of stepped soil nail walls
                    Scientia Iranica, Transaction A: Civil Engineering, 25(1), pp. 140-151.
                    Ahmadi, M.M., and Borghei, S.A. (2018)

                  • A critical state constitutive model for the isotropic thermal compression of structured sand-bentonite buffers
                    Indian Geotechnical Journal, doi: 10.1007/s40098-018-0325-3.
                    Shirasb, A., Karimi, A.H., Hamidi, A., and Ahmadi, M.M. (2018)

                  • Effect of bentonite fine content on the triaxial shear behavior of sandy soils
                    Amirkabir University of Technology Journal of Civil Engineering, Accepted for publication.
                    Hassanloo rad, M., Khatami, M.H., and Ahmadi, M.M. (2018)

                  • Cone penetration test in sand: A numerical-analytical approach
                    Computers and Geotechnics, doi: 10.1016/j.compgeo. 2017.06.010
                    Ahmadi M. M. and Golestani Dariani, A. A. (2017)

                  • Interpretation of in situ horizontal stress from self-boring pressuremeter tests in sands via cavity pressure less than limit pressure: a numerical study, Environmental Earth Sciences, 76:333, doi: 10.1007/s12665-017-6660-3
                    Ahmadi M.M. and Keshmiri E. (2017)

                  • In-situ horizontal stress from CPT in sand: A new approach
                    International Journal of Geotechnical Engineering, doi: 10.1080/19386362.2017.1371932.
                    Ahmadi M. M. and Golestani Dariani, A. A. (2017)

                  • Determination of coefficient of lateral earth pressure at rest for sandy soils using cone penetration test and artificial neural network
                    Amirkabir Journal of Civil Engineering, 49(1) (2017) 67-79, doi: 10.22060/ceej.2016.8601.4417 (in Farsi).
                    Ahmadi, M.M. and Besharat N. (2017)

                  • Numerical modeling of pressuremeter and evaluation of interpretation methods of cavity expansion in sandy soils
                    Sharif Civil Engineering Journal, Vol. 33-2, No. 3-1 (in Farsi).
                    Ahmadi M.M. and Keshmiri E. (2017)

                  • Effect of content and plasticity of fines on the liquefaction resistance of clayey sand using cyclic simple shear tests
                    Sharif Civil Engineering Journal, Vol. 32-2, No. 1-2, pp. 47-58 (in Farsi).
                    Hassani, M., Ahmadi, M.M., and Akbari Paidar, N. (2016)

                  • A new approach for group efficiency of drilled Shafts in sand subjected to axial loading
                    International Journal of Geotechnical Engineering, doi: 10.1080/19386362.2016.1259095.
                    Ahmadi, M.M., and Mahvelati, S. (2016)

                  • Correlation of shear wave velocity and liquefaction resistance of sands containing nonplastic fines
                    Sharif Civil Engineering Journal, Vol. 32-2, No. 2-2 (in Farsi).
                    Akbari Paidar, N., and Ahmadi, M.M. (2016)

                  • Effects of sulphuric acid pollutant on the shear behaviour and strength of sandy soil and sand mixed with bentonite clay
                    International Journal of Geotechnical Engineering, doi: 10.1080/ 19386362.2016. 1193662.
                    Hassanlourad, M., Khatami, Ahmadi M.M. (2016)

                  • Effect of fines type and content of sand on correlation between shear wave velocity and liquefaction resistance
                    Geotechnical and Geological Engineering Journal, Vol. 34, No.6, pp. 1857-1876, doi: 10.1007/s10706-016-9995-8.
                    Akbari Paidar, N., and Ahmadi, M.M. (2016)

                  • Longitudinal settlement profile in shallow tunnels in drained conditions
                    ASCE International Journal of Geomechanics, Vol. 15, No. 6, doi: 10.1061/(ASCE)GM.1943-5622.0000447.
                    Hajjar, M., Nemati Hayati, A., Ahmadi, M.M., Sadrnejad, S.A. (2015)

                  • New and simple equations for ultimate bearing capacity of strip footings on two-layered clays: a numerical study
                    Accepted for publication as a technical note in ASCE International Journal of Geomechanics, doi: 10.1061/(ASCE)GM.1943-5622.0000615.
                    Ahmadi, M.M., and Mofarraj Kouchaki, B. (2015)

                  • Numerical modeling of pressuremeter in sandy soils and evaluation of different methods for interpretation of cavity expansion
                    Accepted for publication in Sharif Civil Engineering Journal (in Farsi).
                    Ahmadi M.M. and Keshmiri E. (2015)

                  • Bearing capacity of shallow strip foundations on two layered clay soils using finite difference method
                    Sharif Civil Engineering Journal, Vol. 31-2, No. 3-1 (in Farsi).
                    Ahmadi, M.M., and Mofarraj Kouchaki, B. (2015)

                  • Effect of pH variations of leachate on the physical and mechanical properties of kaolinite clay soil in the presence of bentonite
                    Journal of Experimental Methods in Civil Engineering, Vol. 2, No. 1, pp. 25-33.
                    Ahmadi M.M., Hasanlou rad M., and Khatami S.M.H. (2015)

                  • Comparison of different codes for axial bearing capacity of piles
                    Accepted for publication as a technical note in Sharif Civil Engineering Journal (in Farsi).
                    Ahmadi M.M. and Keshmiri E. (2015)

                  • Requirements for soil-specific correlation between shear wave velocity and liquefaction resistance of sands
                    Journal of Soil Dynamics and Earthquake Engineering, Vol. 57, pp. 152-163, doi: 10.1016/j.soildyn.2013.11.001.
                    Ahmadi, M.M., and Akbari Paidar, N. (2014)

                  • Influence of fines content and type on the small-strain shear modulus of sand
                    Scientia Iranica, 21(4), pp. 1281-1296.
                    Akbari Paidar, N., and Ahmadi, M.M. (2014)

                  • K0 determination in sandy soils using CPT test: A database approach
                    Sharif Civil Engineering Journal, Vol. 30-2, No. 1-2, pp. 95-106. (in Farsi).
                    Ahmadi, M.M., Karambakhsh, P., and Golestani, A.A. (2014)

                  • Unsupported advance length in NATM tunnels and ground surface settlement
                    International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 37, Issue 14, pp. 2170-2185, doi: 10.1002/nag.2128.
                    Nemati Hayati, A., Ahmadi, M.M., Hajjar, M., and Kashighandi, A. (2013)

                  • Numerical study of ground vibration due to impact pile driving
                    Proceedings of the Institution of Civil Engineers, Geotechnical Engineering, Vol. 167, Issue 1, pp. 28-39, doi: 10.1680/geng.11.00094.
                    Khoubani, A., and Ahmadi, M.M. (2012)

                  • Analysis of axisymmetric problems by element-free Galerkin method
                    International Journal of Modeling and Optimization, Vol. 2, No. 6, doi: 10.7763/IJMO.2012.V2.217.
                    Nemati Hayati, A., Ahmadi, M.M., and Sadrnejad, S.A. (2012)

                  • Numerical modeling of ground settlement control of large span underground metro station in Tehran Metro using Central Beam Column (CBC) structure
                    Journal of Tunneling and Underground Space Technology, Vol. 28, pp 1-9
                    Valizadeh Kivi, A., Sadaghiani, M.H., and Ahmadi, M.M. (2012)

                  • How particle shape affects the flow through granular materials
                    Physical Review E, doi: 10.1103/PhysRevE.85.036310.
                    Nemati Hayati, A., Ahmadi, M.M., and Mohammadi, S. (2012)

                  • Analytical solution for isothermal flow in a shock tube containing rigid granular material
                    Transport in Porous Media, Vol. 93, No. 1, pp 13-27.
                    Nemati Hayati, A., Ahmadi, M.M., and Mohammadi, S. (2012)

                  • A comparative study on pile group and piled raft foundations (PRF) behavior under seismic loading
                    Computational Methods in Civil Engineering, University of Guilan, Vol. 2, No. 2.
                    Eslami, M.M., Aminikhah, A., Ahmadi, M.M. (2011)

                  • Analytical derivation of tortuosity and permeability of monosized spheres: A volume averaging approach
                    Physical Review E 83, 026312.
                    Ahmadi, M.M., Mohammadi, S., and Nemati Hayati, A., (2011)

                  • A practical method for liquefaction analysis using CPT data” Sharif Civil Engineering
                    Journal, Vol. 26-2, No. 3, pp. 13-21. (in Farsi).
                    Kangarani Farahani, M.R., Ahmadi, M.M., and Eslami, A. (2011)

                  • Determination of the reliable distance for full mobilization of tip resistance of drilled shafts in layered soils: The case of sand overlying clay
                    Amirkabir Journal of Science and Technology, Vol. 70, (in Farsi).
                    Ahmadi, M.M., and Khabbazian, M. (2009)

                  • Finite-element modeling of laterally loaded piles in clay
                    Proceedings of the institution of Civil Engineers, Geotechnical Engineering 162 Issue GE3, pp 151-163.
                    Ahmadi, M.M., and Ahmari S. (2009)

                  • End bearing capacity of drilled shafts in sand: A numerical approach
                    Journal of Geotechnical and Geological Engineering, Vol. 27, pp 195-206.
                    Ahmadi, M.M., and Khabbazian, M. (2009)

                  • A numerical study of chamber size and boundary effects on CPT tip resistance in NC sand
                    Scientia Iranica, Vol. 15, No. 5, pp 541-553.
                    Ahmadi, M.M., and Robertson P.K. (2008)

                  • Thin layer effects on the CPT qc measurement
                    Canadian Geotechnical Journal, 42(5), pp 1302-1317.
                    Ahmadi, M.M., and Robertson P.K. (2005)

                  • Cone tip resistance in sand: Modeling, verification, and applications
                    Canadian Geotechnical Journal, 42(4), pp 977-993.
                    Ahmadi, M.M., Byrne P.M., and Campanella, R.G. (2005)

                  • Invited Lecture

                    • Determination of in-situ horizontal stress in sand via CPT
                      June 9, Chair of Foundation Engineering, Soil and Rock Mechanics (GBF center), Ruhr University, Bochum, Germany. http://sfb837.sd.rub.de/index.php?lang=en&seite=gallery&gallery=DETERMINATION_OF_INSITU_HORIZONTAL_STRESS_IN_SAND_VIA_CPT
                      Ahmadi, M.M.(2017)

                    Discussions

                    • Optimum geometrical properties of active isolation co-authored by Jesmani M., Hamissis A., Kamalzare M., and Vileh R.S.
                      Published in the Proceedings of the Institution of Civil Engineers, Geotechnical Engineering, 164(6), (2011). pp 385-400.
                      Khoubani A., and Ahmadi M.M.,(2012)
                    • Numerical modeling of traffic-induced ground vibration
                      co-authored by: Mohannad Mhanna, Marwan Sadek and Isam Shahrour Published in Computers and Geotechnics, [January 2012, Vol. 39, 116-123], Vol. 47, p. 102, doi: 10.1016/j.compgeo.2012.06.003.
                      Khoubani A., and Ahmadi M.M.,(2013)

                    Selected Conference Proceeding

                    • The effect of loading frequency on soil-pile interaction using nonlinear three-dimensional analyses
                      9th International Conference on Seismology and Earthquake Engineering (SEE9-00220040), May 2024, Tehran, Iran.
                      Ahmadi M.M., Hadei S., Borzeshi S.A., and Hokmabadi A. (2024)

                    • Using case histories in civil engineering curriculum
                      14th National Congress on Civil Engineering, 21-22 May 2024, University of Zanjan, Zanjan, Iran.
                      Ahmadi M.M., Sobhdam M.H. (2024)

                    • Investigating the effect of pile configuration and length on the kinematic seismic interaction of pile groups in clay
                      14th National Congress on Civil Engineering, 21-22 May 2024, University of Zanjan, Zanjan, Iran
                      Ahmadi M.M., Hadei S., and Zaeefi M. (2024)

                    • Dynamic response of 3x3 pile groups within the soil-pile-structure system using non-linear three-dimensional numerical analysis
                      9th International Conference on Seismology and Earthquake Engineering (SEE9-00230065), May 2024, Tehran, Iran.
                      Ahmadi M.M., Hadei S., Hokmabadi A., Borzeshi S.A. (2024)

                    • Investigating the effective parameters on excess pore water pressure during CPTu in saturated clayey soil
                      13th International Congress on Civil Engineering, 13ICCE, Science and Technology University, May 2023, Tehran, Iran.
                      Ahmadi, M.M. and Fakhimi Akmal, M. (2023)

                    • Efficiency of geothermal energy as a renewable energy source: Energy performance of energy pile and energy diaphragm wall
                      International Conference on Energy Resilience and Sustainability (ICERS2024), Tehran, Iran.
                      Ahmadi M.M., Sobhdam M.H. (2024)

                    • Modeling and analysis of effects of variations in thickness and isolation materials on the performance of passive house walls
                      13th International Smart Grid Conference, December 2023.
                      Ahmadi, M.M. and Sobhdam, M.H. (2023)

                    • Numerical modeling and analysis of energy pile thermal performance with new heat exchanger pipe configurations
                      5th Iranian Conference on Geotechnical Engineering & 2nd International Conference on Earthquake and Seismic Geotechnical Engineering, October 17 and 18, 2023.
                      Ahmadi, M.M. and Sobhdam, M.H. (2023)

                    • Investigating the effective parameters on soil-pile interaction under dynamic loads
                      5th Iranian Conference on Geotechnical Engineering & 2nd International Conference on Earthquake and Seismic Geotechnical Engineering, October 17 and 18, 2023.
                      Ahmadi, M.M., Hadei, S., Afsaneh Borzeshi, S., and Hokmabadi, A. (2023)

                    • A study on dynamic response of a 3×3 Pile group in a soil-pile-structure system using nonlinear three-dimensional modeling
                      5th Iranian Conference on Geotechnical Engineering & 2nd International Conference on Earthquake and Seismic Geotechnical Engineering, October 17 and 18, 2023.
                      Hadei, S. and Ahmadi, M.M. (2023) (2022)

                    • Effect of geometrical and material parameters on isolation of train-induced vibrations
                      5th Iranian Conference on Geotechnical Engineering & 2nd International Conference on Earthquake and Seismic Geotechnical Engineering, October 17 and 18, 2023.
                      Ahmadi, M.M., Hadei, S., and Rahmani, A. (2023)

                    • A numerical study on the effect of natural conduction on heat transfer around energy thermal tunnels in sandy soils
                      13th National Congress on Civil Engineering, May 10 to 12, 2022, Isfahan University of Technology, Isfahan, Iran.
                      Ashkbari, M.A., and Ahmadi, M.M. (2022)

                    • Effect of soil rigidity index and OCR on excess pore-water pressures generated around a piezocone penetrating in clay
                      6th International Conference on Geotechnical and Geophysical Site Characterization, September 26-29, 2021, Hungary.
                      Khodayari, M. R. and Ahmadi, M. M. (2021)

                    • Estimation of GPM Rainfall for Flood Occurrences Based on the Probability Distribution of Monthly Precipitation: A Case Study in Iran
                      Geo extreme 2021, Savannah, Georgia, USA, Nov. 2021.
                      Ahmadi, M.M., Kaheh, S., Sadeghi, H, and Jamaat, A., (2021)

                    • Assessing liquefaction potential in tailing silts using the results of cone penetration test
                      First International Conference on Earthquake and Seismic Geotechnical Engineering, ICESGE2021, Azarbaijan Shahid Madani University, Tabriz, Iran.
                      Pezeshki Najafabadi A., and Ahmadi M.M. (2021)

                    • Evaluation of different methods for predicting state of tailing silts using CPT meaurements
                      12th International Congress on Civil Engineering, 12ICCE, Ferdowsi University, Mashad, Iran.
                      Pezeshki Najafabadi A., and Ahmadi M.M. (2021)

                    • A numerical study on dynamic response of a 3×3 pile group in a soil-pile-structure system
                      First International Conference on Earthquake and Seismic Geotechnical Engineering, ICESGE2021, Azarbaijan Shahid Madani University, Tabriz, Iran.
                      Hadei, S., and Ahmadi M.M. (2021)

                    • Three-Dimensional Numerical Study of the 3x3 Pile Groups Dynamic Response in the Soil-Pile-Structure System
                      12th International Congress on Civil Engineering, 12ICCE, Ferdowsi University, Mashad, Iran.
                      Hadei, S., and Ahmadi M.M. (2021)

                    • Estimation of failure probability in a railway embankment due to probabilistic distribution of precipitation based on the first-order reliability
                      6th International Reliability and Safety Engineering Confrance, Shiraz, Iran.
                      Ahmadi, M.M., Kaheh, S., and Sadeghi, H. (2021)

                    • A numerical study on the effect of salinity on stability of an unsaturated railway embankment under rainfall
                      The Forth European Conference on Unsaturated Soils, E-UNSAT 2020, doi: 10.1051/e3sconf/202019501004.
                      Kolahdooz, A., Sadeghi, H., and Ahmadi, M.M., (2020)

                    • Stability analysis of an unsaturated embankment located on a saline loess stratum based on the filter paper test results
                      12th National Congress on Civil Engineering, 27 & 28 May, 2020, Sahand University of Technology, Tabriz, Iran.
                      Kolahdooz, A., Ahmadi, M.M., and Sadeghi, H. (2020)

                    • Stability analysis of a railway embankment on a collapsible-dispersive stratum under transient flow
                      16th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, October 2019, Taiwan.
                      Ahmadi, M.M., Sadeghi, H., and Kolahdooz A. (2019)

                    • CPTu N?u cone factor for undrained shear strength of clays: A numerical study
                      4th Iranian Conference on Geotechnical Engineering, November 2019, Shahid Beheshti University, Tehran, Iran.
                      Khodayari, M. R. and Ahmadi, M. M. (2019)

                    • An investigation on the influence of liquefaction on soil profile using CPT test data from Christchurch New Zealand earthquake
                      4th Iranian Conference on Geotechnical Engineering, November 2019, Shahid Beheshti University, Tehran, Iran.
                      Razavinassab and Ahmadi M. M. (2019)

                    • Numerical investigation on the soil strength and deformability parameters on dynamic response of a 2×2 pile group in a soil-pile-structure system
                      4th Iranian Conference on Geotechnical Engineering, November 2019, Shahid Beheshti University, Tehran, Iran.
                      Hadei and Ahmadi M. M. (2019)

                    • Numerical study of effects of the superstructure on dynamic response of a 3×3 pile group
                      8th International Conference on Seismology and Earthquake Engineering (SEE8), Nov. 2019, Tehran, Iran.
                      Hadei, S. and Ahmadi, M.M. (2019)

                    • Probabilistic evaluation of liquefaction potential in sandy soils using cone penetration test (CPT) data
                      11th National Conference on Civil Engineering (11NCCE), May 1-2, 2019, Shiraz University, Shiraz, Iran (in Farsi).
                      Ahmadi M.M. and Razavinassab M. (2019)

                    • A numerical study on the stability of dispersive unsaturated embankment
                      11th National Conference on Civil Engineering (11NCCE), May 1-2, 2019, Shiraz University, Shiraz, Iran (in Farsi).
                      Ahmadi M.M., Kolahdouz A., and Sadeghi H. (2019)

                    • Side resistance of drilled shafts in sandy soils
                      11th International Conference on Civil Engineering (11ICCE), May 8-10, 2018, Tehran University, Tehran, Iran (in Farsi).
                      Ahmadi M.M. and Jazebi, M. (2018)

                    • Probabilistic estimation of relative density of sands using cone penetration test data.
                      11th International Congress on Civil Engineering (11ICCE), 8-10 May, University of Tehran, Tehran, Iran (in Persian).
                      Ahmadi M.M. and Khodayari, M. R. (2018)

                    • Numerical analysis of pile-raft foundations from the point view of bearing capacity in clayey soils under vertical loading
                      11th International Conference on Civil Engineering (11ICCE), May 8-10, 2018, Tehran University, Tehran, Iran (in Farsi).
                      Ahmadi M.M. and Ebrahimi Khaledi, M. (2018)

                    • Bearing Capacity of drilled shafts in clay, a numerical approach
                      11th International Conference on Civil Engineering (11ICCE), May 8-10, 2018, Tehran University, Tehran, Iran.
                      Ahmadi M.M. and Jazebi, M. (2018)

                    • Bearing capacity of square shallow foundations on two layered clay soils: strong layer over weak layer
                      11th International Conference on Civil Engineering (11ICCE), May 8-10, 2018, Tehran University, Tehran, Iran (in Farsi).
                      Ahmadi M.M., Khodayari, M.R., Mokhtarzade Khangahi, M. (2018)

                    • Estimation of sand relative density using CPT in calibration chambers and probabilistic modelling
                      11th International Conference on Civil Engineering (11ICCE), May 8-10, 2018, Tehran University, Tehran, Iran (in Farsi).
                      Ahmadi M.M., and Khodayari (2018)

                    • An investigation on the plastic zone around the tip of drilled shafts in sand
                      3rd Iranian conference on geotechnical engineering, October 2018, Tehran University, Tehran, Iran.
                      Jazebi M, Ahmadi MM. (2018)

                    • Numerical analysis of tunneling effects on surface settlement of structures
                      11th International Conference on Civil Engineering (11ICCE), May 8-10, 2018, Tehran University, Tehran, Iran (in Farsi).
                      Ahmadi M.M., Shirazi, M.H. (2018)

                    • Interpretation of in-situ horizontal stress from self-boring pressuremeter tests in sands: A numerical study
                      19th International Conference on Soil Mechanics and Geotechnical Engineering, Seoul, Korea.
                      Ahmadi M.M. and Keshmiri, E. (2017)

                    • A suitable model for the investigation of cavity expansion in drained condition
                      10th National Conference on Civil Engineering (10NCCE), April 19-21, 2017, Sharif University of Technology, Tehran, Iran.
                      Ahmadi M.M. and Keshmiri, E. (2017)

                    • A 3D analysis of dynamic loadings on seismic behavior of pile groups in cohesive soils
                      10th National Conference on Civil Engineering (10NCCE), April 19-21, 2017, Sharif University of Technology, Tehran, Iran.
                      Ahmadi, M.M., Mashinchian, M.J., and Hadei, S.S. (2017)

                    • Influence of low percentages of fine grained soils on the small strain shear modulus of sands
                      10th National Conference on Civil Engineering (10NCCE), April 19-21, 2017, Sharif University of Technology, Tehran, Iran.
                      Akbari Paidar N. and Ahmadi M.M. (2017)

                    • Numerical analysis of tip bearing capacity of drilled shafts in homogenous sandy soils
                      10th National Conference on Civil Engineering (10NCCE), April 19-21, 2017, Sharif University of Technology, Tehran, Iran.
                      Ahmadi M.M. and Jazebi M. (2017)

                    • Numerical study of pile group under seismic loading in cohesive soil
                      5th International Conference in Geotechnical Engineering and Soil Mechanics, ICGESM2016, Nov. 15-17, 2016, Tehran.
                      Ahmadi, M.M., Mashinchian, M.J., and Hadei, S.S. (2016)

                    • A new method for interpretation of pressuremeter test and determination of in-situ horizontal stress in clay
                      5th International Conference in Geotechnical Engineering and Soil Mechanics, ICGESM2016, Nov. 15-17, 2016, Tehran.
                      Ahmadi, M.M., and Keshmiri,E. (2016)

                    • Numerical modelling of stabilized excavation by pretension anchors in saturated soils and compare the results with survey monitorings
                      5th International Conference in Geotechnical Engineering and Soil Mechanics, ICGESM2016, Nov. 15-17, 2016, Tehran.
                      Ahmadi, A. R., and Ahmadi, M. M. (2016)

                    • Structure formation in bentonite-sand mixtures under temperature in long time curing
                      5th International Conference in Geotechnical Engineering and Soil Mechanics, ICGESM2016, Nov. 15-17, 2016, Tehran.
                      Mirmohammadi, S.N., Shirasb, A., Hamidi, A., and Ahmadi, M.M.

                    • An investigation of soil layering on the behavior of piles under lateral loading
                      5th International Conference in Geotechnical Engineering and Soil Mechanics, ICGESM2016, Nov. 15-17, 2017, Tehran.
                      Ranjbar Moradi, S., and Ahmadi, M.M. (2016)

                    • Correlation of shear wave velocity with liquefaction resistance for silty sand based on laboratory study
                      15th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, October 2015, Japan.
                      Ahmadi, M.M., Akbari Paidar, N. (2015)

                    • Numerical modeling of pressuremeter and evaluation of different methods of limit pressure determination
                      Second National Conference in Soil Mechanics and Foundation Engineering, Ghom University, Ghom, Iran (in Farsi).
                      Ahmadi M.M. and Keshmiri E. (2015)

                    • Determination of geotechnical parameters for sandy soils through numerical modeling of pressuremeter
                      10th International Congress on Civil Engineering, Tabriz University, Tabriz, Iran (in Farsi).
                      Ahmadi M.M. and Keshmiri E. (2015)

                    • Numerical modeling of piles in sandy soils considering stress dependent modulus of elasticity
                      Computer Methods and Recent Advances in Geomechanics (14IACMAG), Japan.
                      Ahmadi, M.M., and Mahvelati Shams Abadi, S. (2014)

                    • Numerical modeling of pressuremeter and determination of undrained shear strength of clayey soils
                      First National Conference in Soil Mechanics and Foundation Engineering, Shahid Rajaee University, Tehran, Iran (in Farsi).
                      Ahmadi M.M. and Keshmiri E. (2014)

                    • Determination of nail length and its effect on the behavior of soil nail walls
                      First National Conference in Soil Mechanics and Foundation Engineering, Shahid Rajaee University, Tehran, Iran (in Farsi).
                      Ahmadi M.M. and Borghei S.A. (2014)

                    • The effect of type and plasticity of plastic fines on the generation of pore water pressure using cyclic simple shear test
                      First Iranian National Geotechnical Engineering Conference”, Mohaghegh Ardabili University, Ardabil, Iran (in Farsi).
                      Hassani, M., Ahmadi, M.M., Akbari Paidar, N. (2014)

                    • The effect of fly ash on the soil geotechnical parameters”, First Iranian National Geotechnical Engineering Conference
                      Mohaghegh Ardabili University, Ardabil, Iran (in Farsi).
                      Ahmadi, M.M., Ghavami Jamal, S. (2014)

                    • The effect of fines type on correlation between shear wave velocity and liquefaction resistance of sand containing fines
                      Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering, Paris 2013.
                      Akbari Paidar, N., and Ahmadi, M.M. (2013)

                    • Effects of amount and plasticity of fines on the liquefaction resistance of sands using cyclic simple shear tests
                      Seventh National Congress on Civil Engineering (7NCCE), University of Sistan and Balouchestan, Zahedan, Iran (in Farsi).
                      Ahmadi, M.M., Hassani, M., and Akbari Paidar, N. (2013)

                    • A numerical investigation of the effects of two-layered clayey and sandy soils on the bearing capacity of shallow foundations
                      Seventh National Congress on Civil Engineering (7NCCE), University of Sistan and Balouchestan, Zahedan, Iran (in Farsi).
                      Yousefi M.R., and Ahmadi, M.M. (2013)

                    • Correlation of shear wave velocity and sand liquefaction resistance
                      9th International Congress on Civil Engineering, Isfahan University, Isfahan, Iran (in Farsi).
                      Ahmadi, M.M., and Akbari Paidar, N. (2012)

                    • Use of passive anchors in increasing the stability safety factor of downstream slope of spillway in Shahriar Storage Dam
                      14th Pan-American Conference on Soil Mechanics and Geotechnical Engineering, Toronto, Canada.
                      Nemati Hayati, A., Ahmadi, M.M., Kashighandi, A., Hajjar, M., Dadashi, M. (2011)

                    • Measurement of shear wave velocity using bender elements and piezoelectric disc
                      1st International Conference on Urban Construction in the Vicinity of Active Faults (in Farsi).
                      Ahmadi, M.M., Akbari Paidar, N., and Fadaei, M. (2011)

                    • Failure mechanism for shallow foundations under seismic loading using numerical methods”
                      6th International Conference on Seismology and Earthquake Engineering (in Farsi).
                      Barkhordari, K., Ahmadi, M.M., Ravanbakhsh, A. (2011)

                    • An investigation on the liquefaction potential of Firoozkouh silty sand using cyclic simple shear test
                      6th International Conference on Seismology and Earthquake Engineering (in Farsi).
                      Ahmadi, M.M., Shirasb, A., Akbari Paidar, N., (2011)

                    • A numerical study of dynamic response of shallow foundations under vertical machine loadings
                      6th International Conference on Seismology and Earthquake Engineering (in Farsi).
                      Ahmadi, M.M., and Pourdeilami, A. (2011)

                    • An estimation of input flow to grout galleries GG0 and GG1 in Shahriar Storage Dam
                      Sixth National Congress on Civil Engineering (6NCCE), University of Semnan, Semnan, Iran (in Farsi).
                      Nemati Hayati, A., Ahmadi, M.M., Barkhordari, H., and Kamrani, K. (2011)

                    • Determination of liquefaction resistance of Firouzkouh sand using cyclic simple shear test
                      Sixth National Congress on Civil Engineering (6NCCE), University of Semnan, Semnan, Iran (in Farsi).
                      Ahmadi, M.M., and Shirasb, A. (2011)

                    • Analysis of axisymmetric problems by element-free Galerkin method: A parametric study
                      3rd International Conference on Computer Modeling and Simulation (ICCMS 2011), V1, pp. 589-594.
                      Nemati Hayati, A., Ahmadi, M.M., and Sadrnejad, S.A., (2011)

                    • An investigation of soil reinforcement in bearing capacity increase of strip foundations
                      4th International Conference on Geotechnical Engineering and Soil Mechanics, (ICGESM 2010), Tehran, Iran (in Farsi).
                      Ahmadi, M.M., Ghassemi-fare, O., and Pourdeilami, A. (2010)

                    • Numerical analysis of strip foundation response in sand reinforced with geogrid
                      4th International Conference on Geotechnical Engineering and Soil Mechanics, (ICGESM 2010), Tehran, Iran, (in Farsi).
                      Ahmadi, M.M., Pourdeilami, A., and Ghassemi-fare, O., (2010)

                    • Analytical solution for shock wave propagation in granular materials
                      13th Annual & 2nd International Fluid Dynamics Conference, Shiraz University, Iran.
                      Ahmadi, M.M., Mohammadi, S., and Nemati Hayati, A., (2010)

                    • Study of the effect of central beam column (CBC) structure and consolidation grouting on the ground settlement of large span underground station, Line 3 Tehran Metro
                      Tunneling Association of Canada Conference (TAC), Vancouver, Canada.
                      Valizade A., Sadaghiani, M.M., and Ahmadi, M.M., (2010)

                    • Numerical analysis of three-dimentional underground excavation for metro stations using Central Beam Column method in tunnels
                      Fifth National Congress on Civil Engineering (5NCCE), Ferdosi University, Mashad, Iran (in Farsi).
                      Valizade Kivi, A., Ahmadi, M.M., and Sadaghiani, M.M. (2010)

                    • K0 determination of sand using CPT calibration chamber”
                      2nd International Symposium on Cone Penetration Testing (CPT’10), Huntington Beach, CA, USA.
                      Ahmadi, M.M., and Karambakhsh, P., (2010)

                    • Liquefaction evaluation based on CPTu soil classification chart
                      Proceedings of the 17th International Conference on Soil Mechanics and Geotechnical Engineering, Egypt, Vol. 2, pp 1028-1031.
                      Ahmadi, M.M., Eslami, A., and Kangarani Farahani, M.R., (2009)

                    • A numerical study of the effects of calibration chamber boundary conditions on pressuremeter test results in sand
                      GeoHalifax 2009, Halifax, Canada.
                      Ahmadi, M.M., and Karambakhsh, P. (2009)

                    • An investigation of anisotropic effects on strength and deformation characteristics of natural soil deposits and cohesion influence
                      8th International Congress on Civil Engineering, Shiraz University, Shiraz, Iran (in Farsi).
                      Ahmadi, M.M., Meshkat, S.Y., and Rajabian, A. (2009)

                    • Dynamic analysis of piles in sand based on soil-pile interaction
                      14th World Conference on Earthquake Engineering, October 12-17, Beijing, China.
                      Ahmadi, M.M., Ehsani, M. (2008)

                    • Numerical analysis of deep foundations under earthquake forces in offshore structures
                      8th International Conference on Coasts, Ports and Marine Structures, November 24-26, ICOPMAS 2008, Tehran, Iran (in Farsi).
                      Ahmadi, M.M., Ehsani, M. (2008)

                    • A numerical study of dynamic response of clayey soils
                      Fourth National Congress on Civil Engineering (4NCCE), University of Tehran, Tehran, Iran (in Farsi).
                      Ahmadi, M.M., Ehsani, M. (2008)

                    • An investigation on the scaling effects on bearing capacity of soils using plate load test
                      Fourth National Congress on Civil Engineering (4NCCE), University of Tehran, Tehran, Iran (in Farsi).
                      Ahmadi, M.M., Rajabian, A. (2008)

                    • Numerical investigation of soil anisotropy effect on laterally loaded piles in clay
                      Canadian Geotechnical Conference, OttawaGeo2007, pp. 1250-1257.
                      Ahmadi, M.M., Ahmari, S. (2007)

                    • Soil layering effects on end bearing capacity of drilled shafts
                      Canadian Geotechnical Conference, OttawaGeo2007.
                      Ahmadi, M.M., Khabbazian, M. (2007)

                    • A simple approach to investigate laterally loaded pile soil interaction in clay
                      4th International Conference on Earthquake Geotechnical Engineering (4ICEGE), Thessaloniki-GREECE 2007.
                      Ahmadi, M.M., Ahmari, S. (2007)

                    • Pile tip bearing capacity in layered soil
                      7th International Conference on Coasts, Ports and Marine Structures, ICOPMAS 2006, (in Farsi).
                      Ahmadi, M.M., Khabbazian, M. (2006)

                    • Numerical simulation of CPT tip resistance in layered soil
                      7th International Congress on Civil Engineering, Tarbiat Modarres University, Tehran, Iran (in Farsi).
                      Ahmadi, M.M. (2006)

                    • Numerical analysis of laterally loaded piles in clay
                      7th International Congress on Civil Engineering, Tarbiat Modarres University, Tehran, Iran (in Farsi).
                      Ahmadi, M.M., Haghparast M. (2006)

                    • Numerical modeling of pile driveability
                      First National Congress on Civil Engineering (1NCCE), Sharif University of Technology, Tehran, Iran (in Farsi).
                      Ahmadi, M.M., Ghazavi, M., and Deriszadeh, M. (2004)

                    • Flow liquefaction of Syncrude sand
                      International Workshop on Characterization and Engineering Properties of Natural Soils, November 2002, Singapore.
                      Robertson, P.K., and Ahmadi, M.M. (2002)

                    • Simulation of cone penetration with FLAC
                      Proceedings of the XI Pan American Conference on Soil Mechanics and Geotechnical Engineering, vol. 3, pp. 1365-1369.
                      Ahmadi, M.M., Byrne P.M., and Campanella R.G. (1999)

                    • Damage to equipment and non-structural elements during June 21, 1990 Iran earthquake
                      Proceedings of ATC-29 Seminar and Workshop on seismic Design and Performance of Equipment and Nonstructural Elements in Buildings and Industrial Structures, Applied Technology Council, pp. 145-154.
                      Astaneh-Asl, A., Bolourchi, S., and Ahmadi, M.M. (1992)

                    • Behavior of reinforced concrete towers during Manjil-Roudbar earthquake of June 1990
                      Proceedings of the Tenth World Conference on Earthquake Engineering, A. A. Balkema, Rotterdam, Vol. 9, pp. 4953-4959.
                      Memari A.M., Ahmadi M.M., and Rezaee B. (1992)

                    • An investigation of the failure of the water tower in Rasht
                      Proceedings of the First International Conference on Seismology and Earthquake Engineering, International Institute of Earthquake Engineering and Seismology, May 27-29, 1991, Tehran, Iran, Vol. III, pp. 345-353.
                      Memari, A.M., Ahmadi, M.M., and Rezaee, B. (1991)

Menu

  • Homepage
  • Background
  • Publications
  • Courses
  • Students
  • Research interest
  • Language
  • Contacts