Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Prof. Darbandi Pic

Masoud Darbandi

Professor

Academic Positions
Education
Awards and Honors
Research Interests 
Teaching Activities
Journal Collaborations
Publications
High Performance Computing Lab
Executive Positions
Supervising Students
Research Assistants
Contact

 

دکتر مسعود دربندي

استاد دانشکده مهندسي هوافضا

دانشگاه صنعتی شريف

Department of Aerospace Engineering -----------(since 1998)

Institute for Nanoscience and Nanotechnology ---------(Associate Member Professor) (since 2008)

Center of Excellence in Aerospace Systems -------------(A Faculty Member) (since 2010)

Center of Excellence in Energy Conversion -------------(A Faculty Member) (2004-2010)

Center for Development of Modern Energy Systems, (Director) (Since 2012)

Center of Excellence in Aerospace Systems -------------(Director) (since 2016)

 Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: top of the pageEducation:

o   Ph.D., Computational Fluid Dynamics, Department of Mechanical Engineering, University of Waterloo, Waterloo, Ontario, Canada, 1996.

o   M.Sc., Energy Conversion, Department of Mechanical Engineering, Sharif University of Technology, Tehran, Iran, 1989.

o   B.Sc., Heat & Fluids, Department of Mechanical Engineering, Sharif University of Technology, Tehran, Iran, 1985.

Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: top of the pageAwards and Honors:

·       Distinguished Teaching Award in Aerospace Engineering (2003), Sharif University of Technology.

·       Distinguished Sharif University Professor Award (2008), Sharif University of Technology.

·       Distinguished Sharif University Professor Award (2015), Sharif University of Technology.

·       Distinguished Sharif University Researcher Award and Prize (2007), Sharif University of Technology.

·       Distinguished Sharif University Researcher Award and Prize (2011), Sharif University of Technology.

·       Distinguished Director of the best R&T Center of Sharif Technology Service Complex in Student Employment (2017).

As the Director of Center for Development of Modern Energy Systems, Sharif Technology Service Complex, Sharif University of Technology.

·       Distinguished Director of the best R&T Center of Sharif Technology Service Complex in Industry Contract Volumes (2019).

As the Director of Center for Development of Modern Energy Systems, Sharif Technology Service Complex, Sharif University of Technology.

·       Distinguished Sharif University Researcher Award and Prize (2021), Sharif University of Technology.

·       The Top 10 Selected Technologists (2023), The event of Selecting 10 Top Technologies Contributing to Iron and Mining Industries, Golgohar Mining and Industrial Company, Kerman, Iran. (News)

·       ISME Award for Supervising the best Nationwide B.Sc. Thesis in Mechanical Engineering (2004), Iranian Society of Mechanical Engineers.

(Student: Ehsan Roohi)

·       IAS Award for Supervising the best Nationwide Ph.D. Thesis in Aerospace Engineering (2010), Iranian Aerospace Society.

(Student: Ali-Reza Naderi).

·       IAS Award for Supervising the best Aerospace Department B.Sc. Thesis in Aerospace Engineering (2014), Iranian Aerospace Society.

(Student: Ramin Jalali).

·       IAS Award for Supervising the best Nationwide M.Sc. Thesis in Aerospace Engineering (2015), Iranian Aerospace Society.

(Student: Mohammad-Reza Modarres).

·       IAS Award for Supervising the best Aerospace Department M.Sc. Thesis in Aerospace Engineering (2016), Iranian Aerospace Society.

(Student: Ramin Jalali).

·       IAS Award for Supervising the best Nationwide Ph.D. Thesis in Aerospace Engineering (2017), Iranian Aerospace Society.

(Student: Majid Ghafourizadeh)

 Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: top of the pageResearch Interests:

Methodologies and Development

·         All-Speed Algorithms,

·         Computational Fluid Dynamics and Computational Heat Transfer,

·         Finite-Volume-based Finite-Element Algorithms and Developments,

·         DSMC or Direct Simulation Monte Carlo in Micro/Nanoflows,

·         Molecular Dynamics and other Particle-based Simulations

·         Micro/Nano Flows

·         Optimization Algorithms,

·         Moving Hybrid and Unstructured Grid Developments,

·         Parallel Computations and High Performance Computing,

·         Combustion and Reacting Flow Simulations,

·         Solid-Fluid Interactions,

·         Complex Turbulent Flow Modeling development.

·         Complex Multiphase Flow Modeling Development.

·         Developing Two- and Three-Particles-Fluid Flow Modeling Development.

Applications

·         Applied Sciences in Aerospace and Airplane Systems, e.g., engines, propeller, combustor, blade, heat exchanger, . . .

·         Applied Sciences in Powerplant, Gas and Oil Refineries, Petrochemical plant, Renewable Energy, . . . industries

·         Large Scale Cooling Systems, e.g., Heller, Wet Cooling Towers, Air Coolers, Hybrid Cooling Systems, . . .

·         Various types of Air- and Water-Cooled Condensers, e.g., surface, deluged, OTC (once-through), air-cooled, . . .

·         Rotary Machines, e.g., gas turbines, compressors, axial and centrifugal fans, propellers, wind turbines, . . .

·         Gas Turbine Units and supplementary systems, e.g. turbine, compressor, blade, combustor, turbine hall, oil cooler, . . .

·         Steam Turbine Units and supplementary systems, e.g., boiler, HRSG, duct burner, feedwater heater, hogging ejector, . . .

·         Electro Motor Driven Compressors, Air-Cooled, Oil-Cooled, Hermetic, . . .

·         Various types of Burners, Duct Burners, Furnaces, HRSGs, Boilers, Incinerators, Flares, Reactors, . . .

·         Air Pollution Control of Engines/Industries: NOx, CO, Soot, SOx, . . . , e.g. exhausts, stacks, Flares, . . .

·         Various types of Heat Exchangers, e.g., tube bank, shell & tube, plated, finned-tube, coiled, Spiral, heat-pipe, . . .

·         Various types of Heat Recovery Systems, e.g., recuperators, waste heat recovery, ljungstrom, . . .

·         Particle Removal/Separator Systems, e.g., Cyclones, Scrubbers, Dust Removal Systems, Gas Separators, . . .

·         Technology/System Development to Save Water in water-based systems/industries

·         Inventing/Developing new engineering Systems to overcome Environmental Malconditions on industry performances

·         Mathematical and Computer Modelling of Engineering Systems,

·         Open/Closed Multi-Section Wind Tunnel Design and Improvement

·         Design and development of Wind Tunnel Remote Control

·         Energy Management and Energy Saving Strategies and Applications,

·         Energy Consumption and Energy Labeling Activities, e.g., Hermetic Compressors, . . .

·         Heat-Balance Modeling of large-scale industries to save Energy,

·         Modeling of Low/Medium/High Pressure Hydraulic, Pneumatic, and Mixed Hydraulic-Pneumatic Systems

·         Piping and Water Circulating System modeling and System Improvement

·         Integrated Modeling of Tidal Impact on the Interaction of Once-Through Basin system and Warm Water Discharge

·         Renewable Energies, e.g., different types of wind turbine, solar, biogas, . . . systems

·         Micro/Nano Devices including MEMS/NEMS,

·        

 Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: top of the pageTeaching Activities:

o   Undergraduate (B.Sc. Courses):

o   Graduate (M.Sc. & Ph.D. Courses):

 

 

 Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: top of the pageJournal Referee Collaborations:

  • Journals in English

1.       Advances in Mathematical Physics, Hindawi Publications, India.

2.       Advances in Mechanical Engineering, SAGE, UK.

3.       Aerospace Science and Technology, Elsevier, USA.

4.       AIAA Journal, American Institute of Aeronautics and Astronautics, USA.

5.       AIAA Journal of Propulsion and Power, American Institute of Aeronautics and Astronautics, USA.

6.       AIAA Journal of Thermophysics and Heat Transfer, American Institute of Aeronautics and Astronautics, USA.

7.       Aircraft Engineering, Emerald, England.

8.       Applied Mathematical Modelling, Elsevier, USA.

9.       Applied Thermal Engineering, Elsevier, USA.

10.   ASME Journal of Fluids Engineering, ASME, American Society of Mechanical Engineering, USA.

11.   Canadian Journal of Civil Engineering, NRC Research Press, Canada.

12.   Chemical Engineering Sciences, Elsevier, USA.

13.   Chinese Journal of Aeronautics, Elsevier, USA.

14.   Computational Mechanics, Springer, USA.

15.   Computational Thermal Sciences, Begell House, USA

16.   Computers & Fluids, Elsevier, USA.

17.   Computers & Mathematics with Applications, Elsevier, USA.

18.   Energy, Elsevier, USA.

19.   Defence Technology, Elsevier, China.

20.   Energy Conversion and Management, Wiley, USA.

21.   Energy Science and Engineering, Elsevier, USA.

22.   Experimental Thermal and Fluid Science, Elsevier, USA.

23.   Fluid Dynamics Research, IOP, Japan.

24.   Frontiers in Energy Research, Frontiers Media SA, Switzerland.

25.   Fuel, Elsevier, USA.

26.   Heat Transfer - Asian Research, John Wiley & Sons, USA.

27.   Heat Transfer Engineering, Taylor & Francis, USA.

28.   IEEE Transactions on Magnetics , IEEE, USA.

29.   IEEE Transactions on Microwave Theory and Techniques, IEEE, USA.

30.   IEEE Journal of Microelectromechanical Systems, IEEE, USA.

31.   IMechE part C - Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Sage Publications,

32.   Industrial & Engineering Chemistry Research, ACS Publications, USA.

33.   Indian Chemical Engineer, Taylor-Francis, India.

34.   International Journal for Numerical Methods in Engineering, John Wiley & Sons, USA.

35.   International Journal for Numerical Methods in Fluids, John Wiley & Sons, USA.

36.   International journal of Aerospace Engineering, Hindawi Publications, India.

37.   International Journal of Computational Methods, World Scientific Publishing Co.

38.   International Journal of Engineering, Materials and Energy Research Center, Iran.

39.   IUST International Journal of Engineering Science, National Center for Scientific Research, Iranian University of Science and Technology.

40.   International Journal of Heat and Mass Transfer, Elsevier.

41.   International Journal of Numerical Methods for Heat & Fluid Flow, Emerald, England.

42.   International Journal of Thermal Sciences, Elsevier, USA.

43.   Iranian Journal of Science and Technology, Shiraz University.

44.   Journal of Aerospace Engineering, American Society of Civil Engineers, USA.

45.   Journal of Aerospace Science and Technology, Iranian Aerospace Society.

46.   Journal of Applied Fluid Mechanics, ICS.

47.   Journal of Computational Physics, Elsevier, USA.

48.   Journal of Constructional Steel Research, Elsevier, USA.

49.   Journal of Fluid Flow, Heat, and Mass Transfer, Avestia Publications, Canada.

50.   Journal of Mechanical Engineering Science, Professional Engineering Publishing LTD, England.

51.   Journal of Mechanical Science and Technology, Springer, USA.

52.   Journal of Microfluidics and Nanofluidics, Springer, USA.

53.   Journal of Thermophysics and Heat Transfer, AIAA, USA.

54.   Journal of Wind Engineering and Industrial Aerodynamics, Elsevier, USA.

55.   Mathematical Problems in Engineering, Hindawi Publications, India.

56.   Meccanica, Springer, UK.

57.   Metallurgical and Materials Transactions B, The Minerals, Metals, and Material Society and ASM of USA, USA.

58.   Numerical Heat Transfer, Taylors and Francis, USA.

59.   Nature - Scientific Reports, Nature, USA.

60.   Physics of Fluids, American Institute of Physics (AIP), USA.

61.   Probabilistic Engineering Mechanics, Elsevier, USA.

62.   Progress in Computational Fluid Dynamics (PCFD), Inderscience Publishers, USA.

63.   Science Asia, The Science Society of Thailand, Thailand.

64.   Scientia Iranica, An International Journal of Science and Technology, Elsevier.

65.   Scientia Nanotechnology, Sharif University of Technology, Iran.

66.   Separation Science and Technology, Taylor & Francis, USA.

67.Shock Wave, Springer, UK.

68.   The Journal for Engineering Research, Sultan Qaboos University, Oman.

69.   Water Resources Research, American Geophysical Union (AGU), USA.

70.World Journal of Engineering and Physical Sciences, World Science Research Journals (WSRJ).

71.    

 

·      Journals with either English-Persian or Persian Publications

1.        Amirkabir Journal of Science and Technology, Amirkabir University.

2.        Esteghlal Journal of Engineering, Isfahan University of Technology.

3.        Journal of Scientific-Resaerch in Aeronautical Engineering, Aerospace Technology Development Organization.

4.        Journal of Computational Methods in Engineering, Isfahan University of Technology Press.

5.        Journal of Computational and Applied Research in Mechanical Engineering (JCARME), Shahid Rajaee University Press.

6.        Journal of AeronauticalEngineering, Shahid Sattari University Press.

7.        Journal Of Hydraulic, Iranian Hdraulic Association, Tarbiat-Modares University,

8.        Journal of School of Engineering, Ferdowsi University of Mashhad.

9.        Journal of Space Science & Technology, Institute of Astronautics System, Iran.

10.    Mechanical & Aerospace Engineering Journal, Imam Hossein (PBUH) University.

11.    Majlesi Journal of Mechanical Engineering, Majlesi Publications Corp.

12.    International Journal of Marine Science and Technology, Sharif University of Technology.

13.    Modares Journal of Mechanical Engineering Quarterly, Tarbiat Modares University.

14.    Sharif Research and Science Quarterly Journal, Sharif University of Technology.

15.    Journal of Faculty of Engineering, Tehran University.

16.    IUST Science and Technology Journal, Iran University of Science and Technology.

 

 Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: top of the pagePublications:

 

 

Journal Papers Published by the following publishers (up to January 1/2023)

Publisher

AIAA

AIP

ACS

ASCE

ASME

APS

Avestia

EDP

papers

7

2

1

2

7

1

1

1

Publisher

Elsevier

Emerald

IAS

InderScience

ISCFD

 

 

Pushpa

papers

17

1

1

1

3

 

 

1

Publisher

SAGE

Springer

Taylor & Francis

Wiley

 

 

University presses

Total

Papers

1

5

17

7

 

 

5

81

 

 

 

Conference Papers Presented in the following countries up to January 1/2023

Country

Bangladesh

Belgium

Canada

China

Croatia

Czech Rep.

Egypt

England

papers

1

1

80

2

1

1

2

1

Country

Finland

France

Germany

Greece

India

Iran

Italy

Japan

Papers

2

2

5

3

1

114

3

5

Country

Kuwait

Malaysia

Serbia

Singapore

South Korea

Spain

Switzerland

Taiwan

Papers

3

3

2

8

6

1

1

2

Country

Turkey

UAE

USA

 

 

 

 

Total

Papers

3

7

92

 

 

 

 

352

 

 (Journals - Reports - Book sections) up to January 1/ 2023

case

Journals

Conference

Workshop

Reports

Book Sec.

 

 

Total

numbers

81

352

1

3

8

 

 

445

 

2023 (selected journal and peer-reviewed conference papers)

 

 

 

 

 

 

 

455

C

Darbandi, M., Mashayekh, K., Seyedi, F., and Schneider G. E., Feasibility Study to Enhance the Performance of Air-Cooled Condensers Using the Heat Pipe Assembly, AIAA Paper 2023-1915, Session: Heat Exchangers and Evaporator, the AIAA Science and Technology 2023 Forum, SciTech2023, USA, 11 pages, Jan. 22-27, 2023, http://dx.doi.org/10.2514/6.2023-1915

2022 (selected journal and peer-reviewed conference papers)

454

J

Darbandi, M., and Jalali, R., A Cost-Effective Approach to Generate Accurate Correlations via Analyzing a Minimum Number of Data Points; Case Study on the Convection Heat Transfer Problem, Canadian Journal of Chemical Engineering, Accepted Aug. 25/2022, In press, (doi: http://dx.doi.org/10.1002/cjce.24704).

453

J

Abbaspour, M., Safari, H., and Darbandi, M., Details Study on the Kinematic Characteristics of Manta Ray Section in Flapping Motion and Exploring its Application in Wave Glider Propulsion System, Sustainable Energy Technologies and Assessments, Vol. 53, Part C, 102710, pp. 1-17, 2022, Elsevier Ltd. (doi: https://doi.org/10.1016/j.seta.2022.102710).

452

C

Mohammad, A., Darbandi, M., and Schneider G. E., The CFD Simulation of Complex Tube Bundles; Special Focus on Turbulence Model Implementation, TFEC Paper 2022-40917, Proceedings of the 7th Thermal and Fluids Engineering Conference, TFEC 2022, University of Nevada, Las Vegas, Nevada, USA, May 15-18, 2022, pp. 1035-1042, http://dx.doi.org/10.1615/TFEC2022.mtf.040917

450

C

Fatin, A., Darbandi, M., Barezban, M. B., Khoshboresh, M., Khaksarpour, R., Ashtab, M., and Schneider G. E., Numerical Simulation of Combusting Flow in a Pelletizing Pilot Furnace to Investigate the Flow Pattern before the Pellet Bed, TFEC Paper 2022-40810, Proceedings of the 7th Thermal and Fluids Engineering Conference, TFEC 2022, University of Nevada, Las Vegas, Nevada, USA, May 15-18, 2022, pp. 1443-1450, http://dx.doi.org/10.1615/TFEC2022.cbf-ii.040810

449

C

Darbandi, M., Abdollahpour, M. S., Mashayekh, K., and Schneider G. E., Numerical Approach to Generate Heat Correlations for the Flow through Smooth and Dimpled Tubes, TFEC Paper 2022-40750, Proceedings of the 7th Thermal and Fluids Engineering Conference, TFEC 2022, University of Nevada, Las Vegas, Nevada, USA, May 15-18, 2022, pp. 819-828, http://dx.doi.org/10.1615/TFEC2022.fnd.040750

445

J

Darbandi, M., and Jalali, R., Internal Cooling Sensitivity Analysis to Improve the Thermal Performance of Gas Turbine Blade using a Developed Robust Conjugate Heat Transfer Method, International Journal of Engine Research, Vol. 24, No. 3, pp. 949-964, January 2023, Sage Pub. (doi: http://dx.doi.org/10.1177/14680874211070101

2021 (selected journal and peer-reviewed conference papers)

444

C

Darbandi, M., Bagherzadeh, A., Numerical Study on Effect of Rib Shape on Cooling Performance in a Square Channel, IHMTC Paper 2021-719, The Proceedings of the 26th National and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC 2021), Indian Institute of Technology Madras, Chennai, Tamil Nadu, India, 4 pages, Dec. 17-20, 2021.

442

C

Darbandi, M., Abdollahpour, M. S., and Mashayekh, K., Providing Thermal Correlation for the Tube-Bundles with Linear and Staggered Arrangements using CFD, eNergetics 2021-078, The 7th International Conference on Science, Technology, and Management in Energy, The Mathematical Institute of the Serbian Academy of Sciences and Arts, Serbia, 6 pages, Dec. 16-17, 2021.

 

441

C

Darbandi, M., Mashayekh, K., Javadpour-Langroodi, P., Seyedi, F., Schneider, G. E., Iranpak, S., and Farhadi, J., Design and CFD Simulation of Interior Wind Guides for the Four Dry Cooling Towers of Shazand Power Plant to Improve the Performance of Cooling System in Critical Peak Hours, ICFFTS Paper 2021-119, The proceedings of the 2nd International Conference on Fluid Flow and Thermal Sciences (ICFFTS 2021), Seoul, South Korea, Nov. 24-26, 2021, (doi: http://dx.doi.org/10.11159/icffts21.119).

432

J

Darbandi, M., Abdollahpour, M. S., and Hasanpour-Matkolaei M., A New Developed Semi-Full-Scale Approach to Facilitate the CFD Simulation of Shell and Tube Heat Exchangers, Chemical Engineering Science, Vol. 245, No. 14, pp. 116836, Dec. 2021, Elsevier. (doi: https://doi.org/10.1016/j.ces.2021.116836

431

J

Darbandi, M., and Naderi, A., An Extended Implicit PIS-ALE Method to Efficient Simulation of Turbulent Flow Domains with Moving Boundaries, Journal of Aerospace Engineering, Vol. 34, No. 5, pp. 04021048_1-16, Sep. 2021, ASCE. (doi: http://dx.doi.org/10.1061/(ASCE)AS.1943-5525.0001279.

430

J

Safari, H., Abbaspour, M., and Darbandi, M., Numerical Study to Evaluate the Important Parameters Affecting the Hydrodynamic Performance of Manta Ray's in Flapping Motion, Applied Ocean Research, Vol. 109, pp. 1-17, April 2021, Elsevier Ltd. (doi: http://dx.doi.org/10.1016/j.apor.2021.102559).

429

C

Darbandi, M., Barezban, M. B., and Schneider G. E., Radiation Calculation in Turbulent Nonpremixed Flame using the Velocity-Turbulent Frequency-Composition Joint PDF Method, AIAA Paper 2021-0207, Session: Radiation Modeling and Experiments II, the AIAA Science and Technology Forum 2021, SciTech 2021, USA, Jan. 11-15 & 19-21, 2021, (http://dx.doi.org/10.2514/6.2021-0207)

 

2020 (selected journal and peer-reviewed conference papers)

 

 

 

428

J

Darbandi, M., Barezban, M. B., Fatin, A., and Bordbar, H., Effect of Oxygen Enrichment in Spectral Thermal Radiation in an Unconfined Turbulent Bluff-Body Flame, Journal of Quantitative Spectroscopy & Radiative Transfer, Vol. 247, No. 5, pp. 106958 (1-8), March 2020, Elsevier Ltd. (doi: http://dx.doi.org/10.1016/j.jqsrt.2020.106958).

427

J

Darbandi, M., Fatin, A., and Bordbar, H., Numerical Study on NOx Reduction in a Large-Scale Heavy Fuel Oil-Fired Boiler using Suitable Burner Adjustments, Energy, Vol. 199, pp. 117371 (13 pages), May 15, 2020, Elsevier. (doi: http://dx.doi.org/10.1016/j.energy.2020.117371).

426

J

Behroozifar, A., and Darbandi, M., Developing the Actuator Disk Model to Predict the Fluid-Structure Interaction in Numerical Simulation of Multimegawatt Wind Turbine Blades, Journal of Energy Resources Technology - Transactions of the ASME, Vol. 142, No. 3, pp. 031204_1-12, March 2020, ASME. (doi: http://dx.doi.org/10.1115/1.4044576).

422

C

Darbandi, M., Ghafourizadeh, M., and Schneider, G. E., Soot Evolution in a JP-Fueled Gas-Turbine Swirl Combustor, AIAA Paper 2020-0629, The AIAA Science and Technology Forum and Exposition 2020, SciTech 2020, Orlando, Florida, USA, 8 pages, Jan. 6-10, 2020, (https://doi.org/10.2514/6.2020-0629)

 

2019 (selected journal and peer-reviewed conference papers)

 

 

 

420

C

Darbandi, M., and Javadpoor. P., Improving Thermal Energy Transfer Performance of Natural Draft Cooling Towers using Thermo-Aerodynamic Components, Paper no. ASHRAE-ICERD2019-1176, ASHRAE 7th International Conference On Energy Research and Development (ASHRAE-ICERD7), Kuwait University, Kuwait Society of Engineers, Kuwait Institute for Scientific Research, and Kuwait Foundation for the Advancement of Sciences, State of Kuwait, Kuwait, 7 pages, November 19-21, 2019.

414

C

Darbandi, M., Ghafourizadeh, M., and Schneider G. E., Numerical Study to Evaluate Soot Formation in a JP Combustor Equipped to Different Types of Swirler, AIAA Paper 2019-4055, AIAA 2019 Propulsion and Energy Forum and Exposition, Indianapolis, Indiana, USA, 7 pages, August 19-22, 2019, (http://dx.doi.org/10.2514/6.2019-4055)

410

C

Darbandi, M., Barezban, M. B., Fatin, A., and Bordbar, H., Effect of Oxygen Enrichment in Spectral Thermal Radiation in an Unconfined Turbulent Bluff-Body Flame, RAD Paper 2019-071, The proceedings of the 9th International Symposium on Radiative Transfer (RAD-19), Athens, Greece, 9 pages, June 3 7, 2019.

408

C

Esmaeili, A., Darbandi, M., and Schneider, G. E., Hybrid Flow Control for Micro Aerial Vehicle with Protuberance Wing and Morphing Surface, CSME-CFDSC Paper 2019-136, The proceedings of the Joint Canadian Society for Mechanical Engineering (CSME) and CFD Society of Canada (CFDSC) International Congress 2019, CSME-CFDSC Congress 2019, University of Western Ontario, London, Ontario, Canada, 6 pages, June 2-5, 2019.

407

C

Jalali, R., Darbandi, M., Bagherzadeh, A., and Schneider, G. E., Optimal Configuration of Angled Rib Turbulators for Conjugate Heat Transfer Simulation, CSME-CFDSC Paper 2019-090, The proceedings of the Joint Canadian Society for Mechanical Engineering (CSME) and CFD Society of Canada (CFDSC) International Congress 2019, CSME-CFDSC Congress 2019, University of Western Ontario, London, Ontario, Canada, 6 pages, June 2-5, 2019

406

J

Sabouri, M., and Darbandi, M., Numerical Study of Species Separation in Rarefied Gas Mixture Flow through Micronozzles Using DSMC, Physics of Fluids, Vol. 31, No 4, pp. 042004-1_15, 2019, American Institute of Physics (AIP). doi: http://dx.doi.org/10.1063/1.5083807

2018 (selected journal and peer-reviewed conference papers)

 

 

 

404

J

Behroozifar, A., and Darbandi, M., An Improved Actuator Disc Model for the Numerical Prediction of the Far-Wake Region of a Horizontal Axis Wind Turbine and its Performance, Energy Conversion and Management, vol. 185, No. 2, pp. 482-495, April 2019, Elsevier.

doi: https://doi.org/10.1016/j.enconman.2019.02.005

403

J

Darbandi, M., and Ghafourizadeh, M., Extending a Low-Order Upwind-Biased Scheme to Solve Turbulent Flames Using Detailed Chemistry Model, Numerical Heat Transfer, Part B: Fundamentals, vol. 73, No. 6, pp. 343-362, Oct 2018, Taylor & Francis.

doi: https://dx.doi.org/10.1080/10407790.2018.1493851

402

J

Jafari, S., Zakeri, R., and Darbandi, M., DPD Simulation of non-Newtonian Electroosmotic Fluid Flow in Nanochannel, Molecular Simulation, vol. 44, No. 17, pp. 1444-1453, Sep 2018, Taylor & Francis. doi: https://doi.org/10.1080/08927022.2018.1517414

401

J

Darbandi, M. and Abrar, B., Advances in Non-Gray Radiation Calculation in Combusting Environments using a Modified Reference Approach, Heat and Mass Transfer, Vol. 54, No. 9, pp. 2705-2713, Sep 2018, Springer.

doi: https://dx.doi.org/10.1007/s00231-018-2310-x

400

C

Sabouri, M., Darbandi, M., and Schneider, G. E., Extending a Hybrid Continuum-Molecular Simulation Method to Solve the Micro/Nanoscale Gas Mixing Problems, ASME Paper no. FEDSM 2018-83454, Proceedings of the ASME 2018 5th Joint US-European Fluids Engineering Summer Conference (FEDSM2018), July 15-20, 2018, Montreal, Quebec, Canada. https://dx.doi.org/10.1115/FEDSM2018-83454

399

C

Darbandi, M., Barezban, M. B., and Schneider, G. E., Evaluating the Ability of SLW Model In Numerical Simulation of Radiative Turbulent Reacting Flow in Industrial Application, ASME Paper no. FEDSM 2018-83431, Proceedings of the ASME 2018 5th Joint US-European Fluids Engineering Summer Conference (FEDSM2018), July 15-20, 2018, Montreal, Quebec, Canada.

http://dx.doi.org/10.1115/FEDSM2018-83431

397

C

Darbandi, M., Fatin, A., and Schneider, G. E., Careful Parameter Study to Enhance the Effect of Injecting Heavy Fuel Oil into a Crossflow Using Numerical Approaches, ASME Paper no. FEDSM 2018-83207, Proceedings of the ASME 2018 5th Joint US-European Fluids Engineering Summer Conference (FEDSM2018), July 15-20, 2018, Montreal, Quebec, Canada.

http://dx.doi.org/10.1115/FEDSM2018-83207

396

C

Darbandi, M., Sabzpoushan, S., and Schneider, G. E., Geometrical Optimization of a Steam Jet-Ejector Using the Computational Fluid Dynamics, ASME-FEDSM 2018-83203, Proceedings of the ASME 2018 5th Joint US-European Fluids Engineering Summer Conference (FEDSM2018), July 15-20, 2018, Montreal, Quebec, Canada. http://dx.doi.org/10.1115/FEDSM2018-83203

394

C

Darbandi, M., Ghafourizadeh, M., Saidi, M. H., and Schneider G. E., Numerical Simulation of Soot Formation in a JP Combustor Using Different Surrogate Fuels, AIAA Paper 2018-3585, The 12th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, AIAA Aviation and Aeronautics Forum and Exposition 2018, Atlanta, Georgia, USA, June 25-29, 2018, http://dx.doi.org/10.2514/6.2018-3585

391

C

Darbandi, M., Khorshidi-Behzadi, H. R., Farhangmehr, V., and Schneider, G. E., A Numerical Study on the Effect of Wind Screens in Improving the Air-Cooled Condenser Performance in Severe Windy Conditions, CFDSC Paper 2018-540, The proceedings of the 26th Annual Conference of the CFD Society of Canada, CFDSC 2018, University of Manitoba, Winnipeg, Manitoba, Canada, June 10-12, 2018.

387

C

Sabzpoushan, S. A., Darbandi, M., and Schneider, G. E., Numerical Investigation on the Effects of Operating Conditions on the Performance of a Steam Jet-Ejector, FFHMT Paper 2018-135, The proceedings of the 5th International Conference of Fluid Flow, Heat and Mass Transfer (FFHMT'18), Niagara Falls, Ontario, Canada, June 7-9, 2018,

doi: http://dx.doi.org/10.11159/ffhmt18.135

379

J

Darbandi, M. and Abrar, B., Thermal Radiation Transfer Calculations in Combustion Fields Using the SLW Model Coupled with a Modified Reference Approach, Journal of Quantitative Spectroscopy & Radiative Transfer, Vol. 205, No. 1, pp. 105-113, January 2018, Elsevier.

DOI: http://dx.doi.org/10.1016/j.jqsrt.2017.08.023

Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: top of the page

2017 (selected journal and peer-reviewed conference papers)

377

W

Darbandi, M., The Contribution of Molecular Simulation to Nanosensing, Invited Speaker to the First International Workshop on Computational and Theoretical Nanoscience, International Workshop Series - IMDEA Nanociencia, Instituto, Univesidad Autónoma de Madrid, Campus de Cantoblanco, 28049, Madrid, Spain, Nov. 30 - Dec. 1, 2017.

376

 

Darbandi, M. and Sabouri, M., Quantifying the Direct Influence of Diffusive Mass Transfer in Rarefied Gas Mixing Simulations, ASME Journal of Fluids Engineering, Vol. 140, No. 3, pp. 031207 (9 pages), Nov. 1, 2017, ASME.

DOI: http://dx.doi.org/10.1115/1.4038085

375

C

Darbandi, M., Fatin, A., and Schneider, G. E., Heavy Fuel Oil Droplet Breakup and Dispersion Study, FFHMT Paper 2017-192, The proceedings of the 4th International Conference of Fluid Flow, Heat and Mass Transfer (FFHMT'17), Toronto, Ontario, Canada, August 21-23, 2017,

doi: http://dx.doi.org/10.11159/ffhmt17.192

373

C

Darbandi, M., Ashrafi-Habibabadi, A., Barezban M. B., and Schneider, G. E., Comparing Eulerian and Lagrangian Approaches in Modeling Multiphase Flow through Venturi-Scrubbers, CFDSC Paper 2017-330, The proceedings of the 25th Annual Conference of the CFD Society of Canada, CFDSC 2017, University of Windsor, Windsor, Ontario, Canada, June 18-21, 2017.

370

C

Darbandi, M., Ghafourizadeh, M., Saidi, M. H., and Schneider G. E., Analysis of Smoke-Aerosol Formation in Pressurized Turbulent Kerosene/Air Flames Using Different Soot Model, AIAA Paper 2017-4349, The 47th AIAA Thermophysics Conference, AIAA Aviation and Aeronautics Forum and Exposition 2017, Denver, Colorado, USA, June 5-9, 2017,

http://dx.doi.org/10.2514/6.2017-4349

369

J

Darbandi, M. and Ghafourizadeh, M., Numerical Study of Inlet Turbulators Effect on the Thermal Characteristics of a Jet Propulsion-Fueled Combustor and Its Hazardous Pollutants Emission, ASME Journal of Heat Transfer, Vol. 139, No. 6, pp. 061201. February 28, 2017, ASME.

doi: http://dx.doi.org/10.1115/1.4035443.

367

C

Darbandi, M., Saidi, M. H., Ghafourizadeh, M., and Schneider G. E., Detailed-Chemistry Study of Soot Nano-Aerosol Formation in a Stagnation-Point Reverse-Flow Combustor, AIAA Paper 2017-1789, the AIAA Science and Technology Forum and Exposition 2017, SciTech2017, the 55th AIAA Aerospace Sciences Meeting, Grapevine, Texas, USA, 6 pages, Jan. 9-13, 2017, (http://dx.doi.org/10.2514/6.2017-1789

366

C

Darbandi, M., Sabouri, M., and Schneider G. E., Rarefaction Effects on Species Diffusion through Nanoscales, AIAA Paper 2017-1613, the AIAA Science and Technology Forum and Exposition 2017, SciTech2017, the 55th AIAA Aerospace Sciences Meeting, Grapevine, Texas, USA, 6 pages, Jan. 9-13, 2017, (http://dx.doi.org/10.2514/6.2017-1613

Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: top of the page

2016 (selected journal and peer-reviewed conference papers)

364

J

Darbandi, M. and Fouladi, N., Numerical Study of Flow-Induced Oscillations of Two Rigid Plates Elastically Hinged at the Two Ends of a Stationary Plate in a Cross-Flow, Journal of Fluids and Structures, Vol. 66, pp. 147-169, October 2016, Elsevier.

DOI: http://dx.doi.org/10.1016/j.jfluidstructs.2016.06.013

363

C

Darbandi, M., Ghafourizadeh, M., and Yousefian, S., Performance of Low-Order RANS Turbulence Models in Predicting Soot Emission from Ethylene Flame, ETMM11 Paper 2016-037, The proceedings the 11th International ERCOFTAC Symposium on Engineering Turbulence Modelling and Measurements, ETMM11-ERCOFTAC 2016, Palermo, Italy, 6 pages, September 21-23, 2016.

362

B

Sabzpoushan, S., Darbandi, M., Mohammadi, M., and Schneider, G. E., Numerical Investigation on Periodic Simulation of Flow Through Ducted Axial Fan, In: J. Belair et al. (Eds.), Mathematical and Computational Approaches in Advancing Modern Science and Engineering, Part III, Springer International Publishing Switzerland, pp. 401-411, August 11, 2016. (http://dx.doi.org/10.1007/978-3-319-30379-6_37)

361

B

Darbandi, M., Abrar, B., and Schneider, G. E., Application of an Optimized SLW Model in CFD Simulation of a Furnace, In: J. Belair et al. (Eds.), Mathematical and Computational Approaches in Advancing Modern Science and Engineering, Part III, Springer International Publishing Switzerland, pp. 389-399, Aug. 11, 2016. (http://dx.doi.org/10.1007/978-3-319-30379-6_36)

360

B

Darbandi, M., Ghafourizadeh, M., and Ashrafizaadeh, M., Effect of Jet Impingement on Nano-aerosol Soot Formation in a Paraffin-Oil Flame, In: J. Belair et al. (Eds.), Mathematical and Computational Approaches in Advancing Modern Science and Engineering, Part I, Springer International Publishing Switzerland, pp. 89-99, Aug. 11, 2016. (http://dx.doi.org/10.1007/978-3-319-30379-6_9)

358

C

Darbandi, M., Ghafourizadeh, M., and Schneider, G. E., The Effect of Different Gaseous Additives on Soot Nano-Aerosol Formation in a Turbulent Non-Premixed Ethylene Flame, CSME Paper 2016-3593, The proceedings the Canadian Society for Mechanical Engineering International Congress 2016, CSME 2016, University of British Columbia, Kelowna, British Columbia, Canada, 5 pages, June 26-29, 2016.

357

C

Darbandi, M., Ghafourizadeh, M., and Schneider G. E., The Effect of a Mini-Scale Primary-Air Injector on Soot Nano-Aerosol Formation in a JP-Fueled Gas-Turbine Combustor, AIAA Paper 2016-4424, AIAA Aviation and Aeronautics Forum and Exposition 2016, The 46th AIAA Thermophysics Conference, Washington, D.C., USA, 6 pages, June 13-17, 2016, (http://dx.doi.org/10.2514/6.2016-4424)

355

J

Darbandi, M., and Ghafourizadeh, M., A New Bi-Implicit Finite Volume Element Method for Coupled Systems of Turbulent Flow and Aerosol-Combustion Dynamics, Journal of Coupled Systems and Multiscale Dynamics, vol. 4, No. 1, pp. 43-59, April 1, 2016, ASP (American Scientific Publisher).

DOI: http://dx.doi.org/10.1166/jcsmd.2016.1095

354

 

Jafari-Gahraz, S. R., Tholudin, B. H. M. L., Schneider, G. E., and Darbandi, M., Experimental Study on Aerodynamic Performance of FFA-W3-270 Airfoil for Axial Wind Turbine Blade, FFHMT Paper 2016-0171, The proceedings of the 3rd International Conference on Fluid Flow, Heat and Mass Transfer (FFHMT'16), Ottawa, Ontario, Canada, 6 pages, May 2-3, 2016

353

C

Darbandi, M., Sabouri, M., and Schneider, G. E., A Comparative Study on the Molecular- and Continuum-Based Simulation Methods for Gas Flow and Mixing in Micro/Nanochannels, FFHMT Paper 2016-0168, The proceedings of the 3rd International Conference on Fluid Flow, Heat and Mass Transfer (FFHMT'16), Ottawa, Ontario, Canada, 8 pages, May 2-3, 2016.

350

C

Darbandi, M., Abrar, B., Barezban, M. B., Schneider G. E., Shamsaei, Y., and Nematollahi, M., Radiative Heat Transfer Modeling in Numerical Simulation of a Heavy Duty Steam Generator, AIAA Paper 2016-2151, the AIAA Science and Technology Forum and Exposition 2016, SciTech2016, The 54th AIAA Aerospace Sciences MeetingIncluding the New Horizons Forum and Aerospace Exposition, San Diego, California, USA, 11 pages, Jan. 4-8, 2016, (http://dx.doi.org/10.2514/6.2016-2151)

348

C

Darbandi, M., Ghafourizadeh, M., and Schneider G. E., The Effect of Soot Nano-Particles Injection on Two-Phase Smoke Aerosol Formation in a Kerosene-Fired Burner, AIAA Paper 2016-1842, the AIAA Science and Technology Forum and Exposition 2016, SciTech2016, The 54th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, San Diego, California, USA, 11 pages, Jan. 4-8, 2016, (http://dx.doi.org/10.2514/6.2016-1842)

345

C

Darbandi, M., and Mosayebi, G., The Simulations of Flow and Heat over Microscale Sensors in Supersonic Rarefied Gas Flows using DSMC, ASME paper MNHMT 2016-6682, Proceedings of the 5th International ASME Micro/Nanoscale Heat and Mass Transfer Conference (MNHMT2016), Vol. 2, pp. V002T15A003; 9 pages, Jan. 3-6, 2016, Biopolis, Singapore, (http://dx.doi.org/10.1115/MNHMT2016-6682).

344

C

Darbandi, M., and Sabouri, M., Rarefaction effects on gas mixing in micro- and nanoscales, ASME paper MNHMT 2016-6604, Proceedings of the 5th International ASME Micro/Nanoscale Heat and Mass Transfer Conference (MNHMT2016), Vol. 1, pp. V001T06A004; 7 pages, Jan. 3-6, 2016, Biopolis, Singapore, (http://dx.doi.org/10.1115/MNHMT2016-6604).

342

C

Jafari, S., Darbandi, M., and Saidi, M. S., Computational Investigation of Graphene Behavior Under Differential Water Pressure and Possible Mass Transfer Influences, ASME paper MNHMT 2016-6571, Proceedings of the 5th International ASME Micro/Nanoscale Heat and Mass Transfer Conference (MNHMT2016), Vol. 2, pp. V002T10A007, 9 pages, Jan. 3-6, 2016, Biopolis, Singapore, (http://dx.doi.org/10.1115/MNHMT2016-6571).

 

 

 

Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: top of the page

2015 (selected journal and peer-reviewed conference papers)

341

J

Darbandi, M., and Ghafourizadeh, M., Solving Turbulent Diffusion Flame in Cylindrical Frame Applying an Improved Advective Kinetics Scheme, Theoretical and Computational Fluid Dynamics, vol. 29, No. 5-6, pp. 413-431, December 2015, Springer-Verlag Berlin.

DOI: http://dx.doi.org/10.1007/s00162-015-0365-6

340

C

Darbandi, M., Abrar, B., and Schneider, G. E., Application of an Optimized SLW Model to Calculation of Non-Gray Radiation Heat Transfer in a Furnace, ASME paper no. IMECE 2015-53213, Proceedings of the ASME 2015 International Mechanical Engineering Congress & Exposition (IMECE2015), November 13-19, 2015, Houston, Texas, USA, (http://dx.doi.org/10.1115/IMECE2015-53213).

338

C

Darbandi, M., Ghafourizadeh, M., and Schneider, G. E., The Effect of a Mini-Scale Flame-Holder on Nano-Particulate Soot Aerosol Formation and CO/CO2 Emissions from a Jet Fuel Combustion Chamber, ASME paper no. IMECE 2015-50082, Proceedings of the ASME 2015 International Mechanical Engineering Congress & Exposition (IMECE2015), November 13-19, 2015, Houston, Texas, USA, (http://dx.doi.org/10.1115/IMECE2015-50082).

337

J

Darbandi, M., and Sabouri, M., Detail Study on Improving Micro/Nano Gas Mixer Performances in Slip and Transitional Flow Regimes, Sensors & Actuators: B. Chemical, vol. 218, pp. 78-88, October 31, 2015, Elsevier.

DOI: http://dx.doi.org/10.1016/j.snb.2015.03.097

336

C

Darbandi, M., Beige, A. A., and Schneider G. E., Using an All-speed Method to Predict High Frequency Pressure Spikes of Water Hammer with Column Separation, AIAA Paper 2015-4248, the AIAA13th International Energy Conversion Engineering Conference, AIAA Propulsion and Energy Forum and Exposition 2015, Orlando, Florida, USA, July 27-29, 2015, http://dx.doi.org/10.2514/6.2015-4248

335

C

Darbandi, M., Ghafourizadeh, M., and Schneider G. E., Numerical Study on the Effects of Fuel Injector on Carbonaceous Pollutants in a Kerosene Combustor, AIAA Paper 2015-3728, the AIAA 51st AIAA/SAE/ASEE Joint Propulsion Conference, AIAA Propulsion and Energy Forum and Exposition 2015, Orlando, Florida, USA, July 27-29, 2015, (http://dx.doi.org/10.2514/6.2015-3728)

334

J

Darbandi, M., and Sabouri, M., Numerical Study of Mixing Enhancement through Nanomixers Using the Throttling Approach, Scientia Iranica, Transaction F: Nanotechnology, vol. 22, No. 3, pp. 1306-1316, June 2015. (http://www.scientiairanica.com/en/ViewIssueArticles?IssueId=53)

329

C

Darbandi, M., Hosseinzadeh, M., and Schneider, G. E., Numerical Study of Waste Gas Incineration Using Non-Premixed Swirl Burner and Burner with a Flame Holder, FFHMT Paper 2015-0155, The proceedings of the 2nd International Conference on Fluid Flow, Heat and Mass Transfer (FFHMT'15), Ottawa, Ontario, Canada, April 30-May 1, 2015.

326

C

Darbandi, M., Ghafourizadeh, M., and Schneider G. E., Numerical Study on Surface Oxidation of Carbonaceous Nano- and Micro-Particles in a Heavily Sooting Ethylene Turbulent Jet Flame, AIAA Paper 2015-2084, the 53rd AIAA Aerospace Sciences Meeting, Kissimmee, Florida, USA, Jan. 5-9, 2015, (http://dx.doi.org/10.2514/6.2015-2084)

325

C

Darbandi, M., Sabouri, M., and Schneider G. E., Effect of Injector Position on the Mixing Performance in Micro/Nanomixers, AIAA Paper 2015-1657, the 53rd AIAA Aerospace Sciences Meeting, Kissimmee, Florida, USA, Jan. 5-9, 2015, (http://dx.doi.org/10.2514/6.2015-1657)

2014 (selected journal and peer-reviewed conference papers)

324

J

Darbandi, M., and Abrar, A., A Compressible Approach to Solve Combined Natural Convection-Radiation Heat Transfer in Participating Media, Numerical Heat Transfer, Part B: Fundamentals, vol. 66, No. 5, pp. 446-469, Sep. 2014, Taylor & Francis.

DOI: http://dx.doi.org/10.1080/10407790.2014.922851

323

C

Darbandi, M., Abrar, B., Khodadadi-Yazdi, M., Zeinali, M., and Schneider, G. E., Theoretical-Experimental Investigation of CO Emission from an Oil Refinery Incinerator, ASME Paper no. FEDSM 2014-22066, Proceedings of the ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting (FEDSM2014), Aug. 3-7, 2014, Chicago, Illinois, USA, (http://dx.doi.org/10.1115/FEDSM2014-22066).

322

C

Darbandi, M., Abrar, B., Barezban, M. B., Faridvand, A., and Schneider, G. E., Reacting Turbulent Flow Simulation to Improve the Mixing Process in an Oil Refinary Incinerator, ASME Paper no. FEDSM 2014-21954, Proceedings of the ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting (FEDSM2014), Aug. 3-7, 2014, Chicago, Illinois, USA, (http://dx.doi.org/10.1115/FEDSM2014-21954).

319

C

Darbandi, M., Ghafourizadeh, M., and Schneider, G. E., Finite Element Volume Analysis of Propane Preheated Air Flame Passing through a Minichannel, ASME Paper no. FEDSM 2014-21832, Proceedings of the ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels (FEDSM2014), Aug. 3-7, 2014, Chicago, Illinois, USA, (http://dx.doi.org/10.1115/FEDSM2014-21832)

317

C

Darbandi, M., Modarres, M. R., Schneider, G. E., and Ghanati, H., Cold Gas Analysis of a Waste-Gas Incinerator to Enhance Mixing Capabilities Using CFD, HEFAT paper no. 2014-1569878791, Proceedings of the 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2014), pp. 1177-1184, July 14-16, 2014, Orlando, Florida, USA.

313

J

Darbandi, M., and Ghafourizadeh, M., Extending a Hybrid Finite-Volume-Element Method to Solve Laminar Diffusive Flame, Numerical Heat Transfer, Part B: Fundamentals, vol. 66, No. 2, pp. 181-210, June 2014. (On line: June 23, 2014, Accepted: Jan. 25, 2014.)

DOI: http://dx.doi.org/10.1080/10407790.2014.894442

312

C

Darbandi, M., Ghafourizadeh, M., and Schneider G. E., Extending a Numerical Procedure to Simulate the Micro/Nanoscale Soot Formation in Ethylene-Air Turbulent Flame Using Acetylene-Route Nucleation, AIAA Paper 2014-2385, the 11th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, AIAA Aviation and Aeronautics Forum and Exposition 2014, Atlanta, Georgia, June 16-20, 2014, (http://dx.doi.org/10.2514/6.2014-2385).

310

C

Darbandi, M., Ghafourizadeh, M., and Schneider, G. E., Two-Phase Flow Simulation of Nano‎- ‎and Micro- Particulate Soot in an Air-Preheated Non-Premixed Turbulent Propane Flame, CFDSC Paper 2014-308, The proceedings of the 22nd Annual Conference of the CFD Society of Canada, (Ottawa, ON, Canada), CFDSC, University of Toronto, Toronto, Ontario, Canada, June 1-4, 2014.

307

C

Jafari, S., Darbandi, M., and Saeidi, M. S., Simulation of a Flexible Polymer Wall Behavior in a Nanochannel Flow Using Dissipative Particle Dynamics Method, Paper No. ICNS5-2014-SEN-017, Proceedings of the 5th International Conference on Nanostructures (ICNS5), Vol. 3, pp. 1523-1525, Kish Island, Iran, March 6-9, 2014 (Selected as the 2nd Top poster of ICNS5).

298

C

Darbandi, M., Ghafourizadeh, M., and Schneider G. E., Aerosol Modeling of Soot Nanoparticles in a Turbulent Diffusion Flame Using An Extended Detailed Kinetic Scheme, AIAA Paper 2014-0580, the 52nd AIAA Aerospace Sciences Meeting, National Harbor, Maryland, USA, Jan. 13-17, 2014, (http://dx.doi.org/10.2514/6.2014-0580)

 

 

 

 

 

2013 (selected journal and peer-reviewed conference papers)

295

C

Darbandi, M., Ghafourizadeh, M., and Jafari, S., Simulation of Soot Nanoparticles Formation and Oxidation in Non-Premixed Methane-Air Flame at an Elevated Pressure, IEEE-NANO 2013-382, Proceedings of the 13th IEEE International Conference on Nanotechnology (IEEE-NANO 2013), pp. 446-451, August 5-8, 2013. Beijing, China

294

C

Darbandi, M., Jafari, S., and Zakeri, R., Dissipative Particle Dynamics Simulation of a Fixed Polymer Chain Behavior Fixed in a Nanochannel Flow, IEEE-NANO 2013-0264, Proceedings of the 13th IEEE International Conference on Nanotechnology (IEEE-NANO 2013), pp. 446-451, August 5-8, 2013. Beijing, China

293

J

Darbandi, M. and Roohi, E., A Hybrid DSMC/Navier-Stokes Frame to Solve Mixed Rarefied/Non-Rarefied Hypersonic Flows over Micro/Nano Obstacles, International Journal for Numerical Methods in Fluids, Vol. 72, No. 9, pp. 937-966, July 30, 2013.

doi: http://dx.doi.org/ 10.1002/fld.3769

292

C

Darbandi, M., Sabouri, M., Lekzian, E., and Schneider, G. E., Using a Direct Simulation Monte Carlo Method to Study the Effect of Wall Temperature Variation on Gas Mixing Evolution through Micro T-Mixers, AIAA Paper 2013-3672, AIAA 2013 Propulsion and Energy Event (11th International Energy Conversion Engineering Conference), San Jose, California, July 14-17, 2013. (doi: http://dx.doi.org/10.2514/6.2013-3672)

291

J

Hosseinizadeh, S. F., Hajibagheri, M., Heidarnataj, M., Darbandi, M., and Javaherdeh, K., High Gradient Temperature Thermo-Buoyant Flow in a Square Cavity with Magnetoconvection Using a Novel Non-Boussinesq Algorithm, Numerical Heat Transfer, Part A: Applications, vol. 64, No. 3, pp. 255-272, June 2013.

DOI: http://dx.doi.org/10.1080/10407782.2013.779471

285

C

Darbandi, M., Fard, M., Raoufi1, B., and Schneider, G. E., A Finite Volume Element Method to Evaluate Ice Accretion Sensitivity over Multi-Element-Airfoil Configuration, The proceedings of the 21st Annual Conference of the CFD Society of Canada, CFDSC, Sherbrooke, Quebec, Canada, May 6-9, 2013.

 

283

J

Darbandi, M., and Fouladi, N., Developing an ordering-based renumbering approach for triangular unstructured grids, Engineering with Computers, Vol. 29, No. 2, pp.225-243, April 2013, Springer.

DOI: http://dx.doi.org/10.1007/s00366-012-0259-9)

282

J

Darbandi, M., Sabouri, M., and Jafari, S., Thermal wall model effect on the lid-driven nanocavity flow simulation using the molecular dynamics method, Numerical Heat Transfer, Part B: Fumdamentals, vol. 63, No. 3, pp. 248-261, March 2013.

DOI: http://dx.doi.org/10.1080/10407790.2013.751254

 

273

B

Darbandi, M., and Lakzian, E., DSMC Simulation and Mixing Analysis of Two Gases in a Microchannel, Proceedings: Applied Mechanics and Materials, Vol. 307, pp. 166-169, Feb. 13, 2013. Trans Tech Publications, Switzerland, (doi: http://dx.doi.org/10.4028/www.scientific.net/AMM.307.166)

 

 

 

 

2012 (selected journal and peer-reviewed conference papers)

271

C

Darbandi, M., Ghafourizadeh, M., and Schneider G. E., Numerical Simulation of Turbulent Reacting Flow in a Combustion Chamber Using Detailed Chemical Kinetics, AIAA Paper 2013-0710, the 51st AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Grapevine, Texas, 14 pages, Jan. 7-10, 2013, (http://dx.doi.org/10.2514/6.2013-710).

 

 

260 

J

 Darbandi, M. and Ebrahimi-Kebria, H. R., Numerical Simulation of Laminar Mixing Flow using a new Improved Compressible Algorithm, Journal of Solid and Fluid Mechanics, Vol. 1, No. 2, pp. 47-56, July 6 2012, University Press.

 

 

256

J

Roohi, E. and Darbandi, M., Recommendations on Performance of Parallel DSMC Algorithm in Solving Subsonic Nanoflows, Applied Mathematical Modeling; Simulation and Computation for Engineering and Environmental Systems, Vol. 36, No. 5, pp. 2314-2321, May 2012, Elsevier. DOI: http://dx.doi.org/10.1016/j.apm.2011.08.036

255

C

Darbandi, M., Fard, M., and Schneider, G.E., Developing FVBFE Method to Perform the Droplet Catching Efficiency Sensitivity Analysis in Tentative Ice Accretion Circumstances, The CD Proceedings of the 20th Annual Conference of the CFD Society of Canada, (Ottawa, ON, Canada), CFDSC, Canmore, Alberta, Canada, 8 pages, May 9-11, 2012.

 

2011 (selected journal and peer-reviewed conference papers)

251

J

Darbandi, M., and Roohi, E., DSMC Simulation of Subsonic Flow through Nanochannels and Micro/Nano Backward-Facing Steps, International Communications in Heat and Mass Transfer, vol. 38, No. 10, pp. 1443-1448, December 2011, Elsevier.

DOI: http://dx.doi.org/10.1016/j.icheatmasstransfer.2011.08.002

 

250

J

Fouladi, N., and Darbandi, M., A numerical algorithm for directional layer ordering of unstructured grids data structure, Sharif Journal of Science & Technology, Vol. 27-3, no. 2, pp. 101-111, Dec. 1, 2011

 

246

C

Yousefian, S., Ghafourian, A., and Darbandi, M., Numerical Study of Syngas Premixed Flame Structure and Extension Paper No. MCS 7, the 7th Mediterranean Combustion Symposium, September 11-16, 2011, Chia Laguna, Cagliari, Italy

 

245

J

Darbandi, M., and Fouladi, N., A Reduced Domain Strategy for Local Mesh Movement Application in Unstructured Grids, Applied Numerical Mathematics, vol. 61, No. 9, pp. 1001-1016, September 2011, (DOI: http://dx.doi.org/10.1016/j.apnum.2011.04.005)

243

C

Darbandi, M., and Karchani, A., and Akhlaghi, H., Thermal Simulation of Gas Flow through Microchannels using Direct Simulation Monte Carlo, Paper ICCHMT 2011-162, Proceedings of the 7th International Conference on Computational Heat and Mass Transfetr, ICCHMT 2011, July 18-22, 2011, Istanbul, Turkey

237

C

Darbandi, M., Karchani, A., and Schneider, G. E., The Study of Rarefied Gas Flow through Microfilters with Different Openings Using MONIR-DSMC, Paper ASME ICNMM 2011-58029, Proceedings of ASME 2011, 9th International Conference on Nanochannels, Microchannels, and Minichannels, ASME-ICNMM2011, June 19-22, 2011, Alberta, Canada

236

J

Ebrahimi-Kebria, H. R., Darbandi, M., and Hosseinizadeh, S. F., Numerical Simulation of Low Mach Number Laminar Mixing and Reacting Flows Using a Dual-Purpose Pressure-Based Algorithm, Numerical Heat Transfer, Part B: Fundamentals, vol. 59, No. 6, pp. 495-514, June 9/ 2011. (DOI: http://dx.doi.org/10.1080/10407790.2011.578018)

235

J

Haghdoost, A., Dehkordi, A. M., Darbandi, M., Shahalami, M., and Saien, J., Combined Model of Mass-Transfer Coefficients for Clean and Contaminated Liquid-Liquid Systems, Industrial & Engineering Chemistry Research, vol. 50, No. 8, pp. 4608-4617, March 11/ 2011. (DOI: http://dx.doi.org/10.1021/ie901076f)

234

C

Darbandi, M., and Sabouri, M., Numerical Simulation of Hydrogen Absorption on Carbon-Nanotubes using Molecular Dynamics Method, the proceedings of the 9th Nanotechnology Student Conference, Tarbiat Modares University, Tehran, Iran, pp. 2191-2196, March 3-4, 2011

228

J

Darbandi, M., and Roohi, E., Study of Subsonic-Supersonic Gas Flow through Micro/Nanoscale Nozzles Using Unstructured DSMC, Microfluidics and Nanofluidics Journal, Vol. 10, No. 2, pp. 321-335, January 29/ 2011, (DOI: http://dx.doi.org/10.1007/s10404-010-0671-7).

2010 (selected journal and peer-reviewed conference papers)

227

J

Scanlon, T. J., Roohi, E., White, C., Darbandi, M., and Reese, J. M., An Open Source, Parallel DSMC Code for Rarefied Gas Flows in Arbitrary Geometries, Computers & Fluids, Vol. 39, No. 10, pp. 2078-2089, December 10, 2010. (DOI: http://dx.doi.org/10.1016/j.compfluid.2010.07.014).

226

J

Hosseinizadeh, S. F., Darbandi, M., and Heidarnataj M., Numerical Study of High Gradient Thermobuoyant Flow in a Tilted Cavity Using a Novel Non-Boussinesq Algorithm, Numerical Heat Transfer, Part A: Applications, vol. 58, No. 12, pp. 984-1003, December 06/ 2010. (DOI: http://dx.doi.org/10.1080/10407782.2010.529026)

225

C

Darbandi, M., Akhlaghi, H., Karchani A. and Vakili, S., Various Boundary Condition Implementations to Study Microfilters using DSMC Simulation, Paper ASME IMECE2010-40379, Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition, IMECE2010, November 12-18, 2010, Vancouver, British Columbia, Canada

224

J

Alipanah, M., Hasannasab, P., Hosseinizadeh, S. F., and Darbandi, M., Entropy Generation for Compressible Natural Convection with High Gradient Temperature in a Square Cavity, International Communications in Heat and Mass Transfer, Vol. 37, No. 9, pp. 1388-1395, November, 2010. (DOI: http://dx.doi.org/10.1016/j.icheatmasstransfer.2010.07.020)

223

C

Yousefian, S., Ghafourian, A., and Darbandi, M., Study of Syngas Autoignition Delay Time Under Gas Turbine Operating Conditions: A Review of Kinetic Mechanisms, Paper ID No. 12, 5th International Conference in the Future of Gas Turbine Technology, 27-28 October 2010, Brussels, Belgium

221

J

Darbandi, M., and Sadeghi H., Numerical Simulation of Orifice Cavitating Flows using Two-Fluid and Three-Fluid Cavitation Models, Numerical Heat Transfer, Part A: Applications, vol. 58, No. 6, pp. 505-526, September 15, 2010. (DOI: http://dx.doi.org/10.1080/10407782.2010.508436)

 

219

C

Darbandi, M., Zakeri, R., and Schneider, G. E., Simulation of Polymer Chain Driven by DPD Solvent Particles in Nanoscale Flows, Paper ASME FEDSM-ICNMM 2010-31087, Proceedings of ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels, and Minichannels, FEDSM2010-ICNMM2010, August 2-4, 2010, Montreal, Canada

217

 C

Darbandi, M., Abbasi, H. R., Sabouri, M., and Khaledi-Alidusti R., Simulation of Heat Transfer in Nanoscale Flow Using Molecular Dynamics, Paper ASME FEDSM-ICNMM 2010-31065, 6 pages, Proceedings of ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels, and Minichannels, FEDSM2010-ICNMM2010, August 2-4, 2010, Montreal, Canada

 

213

J

Hanafizadeh, P., Saidi, M. H., Darbandi, M., and Kebriaee, A., Numerical Simulation of Two-Phase Flow in Airlift Pumps Using the Physical Influence Scheme, Progress in Computational Fluid Dynamics, Vol. 10, No. 3, pp. 186-194, May 25, 2010. (DOI: http://dx.doi.org/10.1504/PCFD.2010.033330).

210

 C

Darbandi, M., and Sabouri, M., Study of Physical Adsorption of Hydrogen on Finite Carbon Nanotube Bundles Using Molecular Dynamics Simulation, ISME-2010-1483, the proceedings of the 18th ISME 2010 Conference, Sharif University of Technology, Tehran, Iran, 6 pages, May 11-13, 2010

209

J

Naderi, A.R., and Darbandi, M., and Taeibi_Rahni, M., Developing a unified FVE-ALE approach to solve unsteady fluid flow with moving boundaries International Journal for Numerical Methods in Fluids, Vol. 63, No. 1, pp. 40-68, 10 May 2010, (DOI: http://dx.doi.org/10.1002/fld.2055).

199

 C

Darbandi, M., Zakeri, R., and Schneider, G.E., Dissipative Particle Dynamics Simulation of Electroosmotic Flow in Nanoscale Channels, AIAA Paper 2010-0807, the 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Orlando, Florida, 8 pages, Jan. 4-7, 2010.

2009 (selected journal and peer-reviewed conference papers)

198

 C

Sadeghi, H., Darbandi, M., and Mani, M., Numerical Studies about Cavitation of Internal Turbulent Flows, The Proceedings of the 6th International Symposium on Turbulence, Heat, and Mass Transfer, Rome, Italy, 10 pages, Sept. 14-18, 2009

197

 J

Roohi, E., Darbandi, M., and Mirjalili, V., Direct Simulation Monte Carlo Solution of Subsonic Flow Through Micro/Nanoscale Channels, ASME Journal of Heat Transfer, Vol. 131, No. 9, 092402-1--8, September 2009. (DOI: http://dx.doi.org/10.1115/1.3139105).

196

 J

Roohi, E., and Darbandi, M., Extending the Navier-Stokes Solutions to Transition Regime in two-dimensional Micro- and Nanochannel Flows Using Information Preservation Scheme, Physics of Fluids, Vol. 21, No. 8, pp.082001-(1-12), August 5, 2009.

(DOI: http://dx.doi.org/10.1063/1.3177351).

193

 C

Darbandi, M., Mazaheri, I., Molaei-Dehkordi, A., and Schneider, G.E., A Level-Set Modelling of Droplet Dynamics in Fluid-Fluid Interaction, AIAA-2009-4292, 39th AIAA Fluid Dynamics Conference & Exhibit, San Antonio, Texas, June 22-25, 2009.

192

 C

Darbandi, M., Ghafourizadeh, M., and Schneider, G. E., Numerical Calculation of Turbulent Reacting Flow in a Model Gas Turbine Combustor, AIAA Paper Number AIAA-2009-3926, 41st AIAA Thermophysics Conference, San Antonio, Texas, June 22-25, 2009.

189

 C

Darbandi, M., and Farzinpour, P., Novel Boundary Condition Implementations to Model Electroosmotic Phenomenon in Microchannels, ASME ICNMM Paper 2009-82278, The Seventh International ASME Conference on Nanochannels, Microchannels and Minichannels, ICNMM2009, June 22-24, 2009, Pohang, South Korea.

187

 C

Darbandi, M., and Setayeshgar, A., Flow Past Confined Nano Cylinder in Microscale Channels, ASME ICNMM Paper 2009-82222, The Seventh International ASME Conference on Nanochannels, Microchannels and Minichannels, ICNMM2009, June 22-24, 2009, Pohang, South Korea.

182

 C

Darbandi, M., Farzinpour, P., and Schneider, G.E., Adverse Pressure Gradient Effect on Electroosmotic-Driven Flow in Microchannels, The17th Annual Conference of the CFD Society of Canada, (Ottawa, ON, Canada), CFDSC, Ottawa, ON, Canada, 8 pages, May 3-5, 2009.

180

 C

Darbandi, M., and Daghighi, Y., Applying Hybrid Finite-Volume\Finite-Element on Unstructured Quadratic Second-Order Elements, The 17th Annual Conference of the CFD Society of Canada, (Ottawa, ON, Canada), CFDSC, Ottawa, ON, Canada, 8 pages, May 3-5, 2009.

179

 J

Darbandi, M., and Vakilipour, S., Solution of Thermally Developing Zone in Short Micro/Nanoscale Channels, ASME Journal of Heat Transfer, Vol. 131, No. 4, pp. 044501-1--5, April 2009. (DOI: http://dx.doi.org/10.1115/1.3072908).

176

 J

Vakili S., and Darbandi, M., Recommendations on Enhancing the efficiency of Algebraic Multigrid Preconditioned GMRES in Solving Coupled Fluid Flow Equations, Numerical Heat Transfer; Part B Fundamentals, Vol. 55, No. 3, pp. 232-256, March 2009. (DOI: http://dx.doi.org/10.1080/10407790802628879).

175

J

Vakilipour, S., and Darbandi, M., Advancement in Numerical Study of Gas Flow and Heat Transfer in Microchannel, AIAA Journal of Thermophysics and Heat Transfer, Vol. 23, No. 1, pp. 205-208, January-March 2009. (DOI: http://dx.doi.org/10.2514/1.37037).

173

 C

Darbandi, M., and Alami, N., Numerical Modeling of Interaction between Flexible Vibrational Airfoil Skin with Fluid to Improve its Aerodynamics Performance, Paper No. IAS-2009-AE-0590, The 8th International Conference of IAS, Maleke-Ashtar University of Technology, Isfahan, Iran, Feb. 17-19, 2009.

2008 (selected journal and peer-reviewed conference papers)

169

 C

Vakilipour, S., and Darbandi, M., Viscous Dissipation Effects in Nanoscales, The proceedings of the 2nd International Congress on Nanoscience and Nanotechnology, ICNN 2008, Tabriz, Iran, Oct. 28-30, 2008.

168

 C

Mirjalili, V., Darbandi, M., Roohi E., Heat Transfer Characteristics of Supersonic Flow in Nano-Geometries Using DSMC-IP Method, the proceedings of the 2nd International Congress on Nanoscience and Nanotechnology, ICNN 2008, Tabriz, Iran, Oct. 28-30, 2008.

164

 J

Javadi, Kh., Darbandi, M., and Taeibi-Rahni, M., Three-Dimensional Compressible-Incompressible Turbulent Flow Simulation Using a Pressure-Based Algorithm, Computers & Fluids, Vol. 37, No. 6, pp.747-766, July 2008; (doi: http://dx.doi.org/10.1016/j.compfluid.2007.09.004).

162

 C

Roohi, E., Darbandi, M., and Mirjalili, V, DSMC Solution of Supersonic Scale to Chocked Subsonic Flow in Micro to Nano Channels, ASME ICNMM Paper No. 2008-62282, The Sixth International ASME Conference on Nanochannels, Microchannels and Minichannels, (ICNMM2008), pp. 985-993, June 23-25, 2008, Darmstadt, Germany, ISBN: 0-7918-4834-5.

161

 C

Darbandi, M., and Y. Daghighi, Computation of Rarefied Gaseous Flow in Micro to Nano Scale Channels with Slip to Transient Regimes Using General Second-Order Quadratic Elements, ASME ICNMM Paper No. 2008-62155, Proceedings of the Sixth International ASME Conference on Nanochannels, Microchannels and Minichannels, (ICNMM2008), pp. 55-64, June 23-25, 2008, Darmstadt, Germany, ISBN: 0-7918-4834-5, DOI:10.1115/ICNMM2008-62155.

159

 J

Darbandi, M., Roohi, E., and Mokarizadeh, V., Conceptual Linearization of Euler Governing Equations to Solve High Speed Compressible Flow Using a Pressure-Based Method, Numerical Methods for Partial Differential Equations, Vol. 24, No. 2, pp.583-604, 2008. (DOI: http://dx.doi.org/10.1002/num.20275).

158

 J

Darbandi M., Vakili S., and Schneider G.E., Efficient Multilevel Restriction-Prolongation Expressions for Hybrid Finite Volume Element Method, International Journal of Computational Fluid Dynamics, Vol. 22, No. 1-2, pp. 29-38, Jan.-Feb 2008, DOI: http://dx.doi.org/10.1080/10618560701737203

154

 C

Fouladi, N., and Darbandi, M., A Flexible Spring-Based Unstructured Grid Deformation Strategy, Paper No. IAS-2008-AE-0189, The 7th International Conference of Iranian Aerospace Society, Sharif University of Technology, Tehran, Iran, 10 pages, Feb. 19-21, 2008.

153

 C

Yousefian, S., Ghafourian, A., and Darbandi, M., Systematic Simplification of Chemical Kinetic Mechanisms with DRG and CSP Methods, Paper No. CCI-2063, Proceedings of the Second Iran Combustion Conference, 9 pages, Mashad, Iran, Feb. 12-13, 2008.

151

J

Darbandi, M., and Vakilipour, S., Developing Implicit Pressure-Weighted Upwinding Scheme to Calculate Steady and Unsteady Flows on Unstructured Grids, International Journal for Numerical Methods in Fluids, Vol. 56, No. 2, pp. 115-141, January 20, 2008. DOI: http://dx.doi.org/10.1002/fld.1451

149

 C

Darbandi, M., Ghafourizadeh, M., and Schneider, G.E., Developing a Novel FEV Formulation to Solve Laminar Diffusive Flame in Cylindrical Coordinates, AIAA Paper 2008-1257, the 46th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, 11 pages, Jan. 7-10, 2008.

148

 C

Darbandi, M., and Vakilipour, S., Developing Consistent Inlet Thermal Boundary Condition in Micro/Nano Scale Channels with Heat Transfer, ASME-MNHT Paper No. 2008-52131, the Proceedings of the ASME 2008 First International Conference on Micro/Nanoscale Heat Transfer (MNHT 2008), Parts A and B, pp. 691-700, Jan. 6-9, 2008, Tainan, Taiwan. ISBN: 0-7918-4292-4.

147

 C

Darbandi, M., and Vakilipour, S., Numerical Study Of Flow And Heat In Long Micro and Nano Channels, ASME-MNHT Paper No. 2008-52131, the Proceedings of the ASME 2008 First International Conference on Micro/Nanoscale Heat Transfer (MNHT 2008), Parts A and B, pp. 1299-1307, Jan. 6-9, 2008, Tainan, Taiwan. ISBN: 0-7918-4292-4.

2007 (selected journal and peer-reviewed conference papers)

146

 J

Javadi, Kh., Taeibi-Rahni, M., and Darbandi, M., Jet-into-Crossflow Boundary-Layer Control: Innovation in Gas Turbine Blade Cooling, AIAA Journal, Vol. 45, No. 12, pp. 2910-2925, December 2007. http://dx.doi.org/

145

J

Darbandi, M., Torabi, S.O., Saadat, M., Daghighi, Y., and Jarrahbashi, D., A Moving-Mesh Finite-Volume Method to Solve Free-Surface Seepage Problem in Arbitrary Geometries, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 31, No. 14, pp.1609-1629, Dec. 10, 2007, John Wiley & Sons, Ltd.

DOI: http://dx.doi.org/10.1002/nag.611.

143

J

Darbandi, M., and Hosseinizadeh, S.F., Numerical Study of Natural Convection in Vertical Enclosures using a Novel Non-Boussinesq Algorithm, Numerical Heat Transfer; Part A Applications, Vol. 52, No. 9, pp. 849-873, October 2007.

DOI: http://dx.doi.org/10.1080/10407780701340155.

142

J

Darbandi, M., and and Vakilipour, S., Developing Consistent Inlet Boundary Conditions to Study the Entrance Zone in Microchannels, AIAA Journal of Thermophysics and Heat Transfer, Vol. 21, No. 3, pp.596-607, July/September 2007.

DOI: http://dx.doi.org/10.2514/1.27509

141

 C

Darbandi, M., Hassanzadeh, H., and Schneider, G. E., Numerical Study of Buoyancy-Driven Turbulent Flow in Square Cavity with Large Temperature Differences, AIAA Paper 2007-4022, the 39th AIAA Thermophysics Conference, Miami, FL, 14 pages, June 25-28, 2007.

140

 C

Javadi, K., Darbandi, M., and Taeibi-Rahni, M., 3D Compressible Turbulent Channel Flow Simulation Using an Extended Pressure Based Algorithm, AIAA Paper 2007-3866, the 37th AIAA Fluid Dynamics Conference and Exhibit, Miami, Florida, June 25-28, 2007.

139

 C

Darbandi, M., Rikhtegar, F., and Schneider, G. E., Simulation of Rarefied Micro to Nano Gas Flows Using Improved Slip Flow Models, AIAA Paper 2007-3991, the 37th AIAA Fluid Dynamics Conference and Exhibit, Miami, FL, 8 pages, June 25-28, 2007.

138

 C

Darbandi, M., Hassanzadeh, H., and Schneider, G.E., Numerical Modeling of Buoyancy-Driven Turbulent Flows in Enclosures Using a Dual-Purpose Algorithm, The Proceedings of the 15th Annual Conference of the CFD Society of Canada, (Toronto, ON, Canada), CFDSC, Ottawa, ON, Canada, May 27-31, 2007.

136

 C

Darbandi, M., Vakilipour, S., and Schneider, G. E., A Compressible-Incompressible Algorithm to Study the Compressibility Effect in Gaseous Microflows, The 15th Annual Conference of the CFD Society of Canada, (Toronto, ON, Canada), CFDSC, May 27-31, 2007.

133

 C

Darbandi, M., Rikhtegar, F., and Vakilipour, S., Finite Volume Simulation of Transition Regime Using a Second-Order Velocity Slip, The 2nd International Conference in Computational Methods, Hiroshima, Japan, 13 pages, April 4-6, 2007.

131

 C

Darbandi, M., Daghighi, Y., and Jarrahbashi, D., A Moving Mesh Finite Volume Simulation of Flow through Porous Media with Random Permeability, The 9th International Conference on Computational Fluid Dynamics, Berkshire, England , March 26-29, 2007.

130

J

Darbandi, M., Mokarizadeh, V., and Rouhi, E., Developing a Shock-Capturing Formulation with High Performance to Capture Normal Standing Shock in All-Speed Regime, Esteghlal Journal of Engineering, Vol. 25, No. 2, pp. 167-181, Feb. 2007.

128

J

Darbandi, M., Vakilipour, S., Using Fully Implicit Conservative Statements to Close Open Boundaries Passing through Recirculations, International Journal for Numerical Methods in Fluids, Vol. 53, No. 3, pp.371-389, Jan. 2007.

127

 C

Fouladi, N., Darbandi, M., and Schneider, G.E., Developing a Robust Ordering-Based Unstructured Moving Grid Strategy, AIAA Paper 2007-1460, the 45th AIAA Aerospace Sciences Meeting & Exhibit, Reno, NV, January 8-11, 2007.

126

 C

Darbandi, M., Vakilipour, S., Rikhtegar, F., Schneider, G.E., A Finite Volume Simulation of Gaseous Microflows Using Improved slip Flow Conditions, AIAA Paper 2007-0934, the 45th AIAA Aerospace Sciences Meeting & Exhibit, Reno, NV, January 8-11, 2007.

2006 (selected journal and peer-reviewed conference papers)

125

J

Darbandi, M., and Naderi, A., Multiblock Hybrid Grid Finite Volume Method to Solve Flow in Irregular Geometries, Computer Methods in Applied Mechanics and Engineering, Vol. 199, Issues 1-3, pp. 321-336, Dec. 2006.

DOI: http://dx.doi.org/10.1016/j.cma.2006.04.005

123

 B

Darbandi, M., and Banaeizadeh, A., Developing a New Bi-Implicit Finite Volume Element Method to Solve Nonpremixed Diffusion Flame, in Computational Methods, Edited by G. R. Liu, V.B.C. Tan, and X. Han, pp. 203-213, Springer, Netherlands, Nov. 2006.

122

 B

Darbandi, M., and Zakyani, M., ``Solving Turbulent Flow in Curvilinear Coordinate System Using Covariant Velocity Calculation Procedure, in Computational Methods, Edited by G. R. Liu, V.B.C. Tan, and X. Han, pp.161-175, Springer, Netherlands, Nov. 2006.

119

J

Darbandi, M., Taeibi-Rahni, M., and Naderi, A.R., Firm Structure of the Separated Turbulent Shear Layer Behind Modified Backward-Facing Step Geometries, International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 16, No. 7, pp. 803-826, Aug. 2006. DOI: http://dx.doi.org/10.1108/09615530610683520

116

 C

Darbandi, M., Vakili, S., and Schneider, G.E., Multigrid Treatment of Finite Volume Element Simulation of Nonpremixed Turbulent Reacting Flow, the 14th Annual Computational Fluid Dynamics Conference, Kingston, Ontario, Canada, CFDSC, July 16-18, 2006.

113

 C

Darbandi, M., Schneider, G.E., and Nazari, A., Drag Reduction of Light Weight UAV Wing with Deflectable Surface in Low Reynolds Number Flights, AIAA Paper 2006-3680, the 3rd AIAA Flow Control Conference, San Francisco, California, June 5-8, 2006.

112

 C

Darbandi, M., Schneider, G.E., Setayeshgar, A., and Vakili, S., Modification of Standard k-epsilon Turbulence model for Multi-element Airfoil Application using Optimization Techniques, AIAA Paper 2006-2829, the 24th AIAA Applied Aerodynamics Conference, San Francisco, California, June 5-8, 2006.

111

J

Darbandi, M., and Hosseinizadeh, S.F., Numerical Simulation of Thermobuoyant Flow with Large Temperature Variation, AIAA Journal of Thermophysics and Heat Transfer, Vol. 20, No. 2, pp. 285-296, April-June 2006.

109

 C

Darbandi, M., Kazemi-Oskoii , S.A. , and Ghaemi S., The Study of Turbulent Supersonic Flow over Modified Rearward-Facing Step Geometries, Proceedings of the Eleventh Asian Congress of Fluid Mechanics (11ACFM), Kuala Lumpur, Malaysia, pp. 566-571, May 22-25, 2006.

104

J

Darbandi, M., Mousaviraad, S.M., Sadathosseini, S.H., and Schneider, G.E., Developing an Optimized k-ε Turbulence Model for Ship Resistance Calculations, Computational Fluid Dynamics Journal, Vol. 15, No. 1, pp. 143-151, 2006.

103

J

Darbandi, M., Saadat, M., and Torabi, S.O., A Finite Volume Method to Solve Free Surface Flow in Porous Media, Computational Fluid Dynamics Journal, Vol. 15, No. 1, pp.44-51, 2006.

102

J

Darbandi, M., Schneider, G.E., and Vakili, S., Using Different Preconditioned Krylov Subspace Methods to Solve Coupled Fluid Flow Equations, Computational Fluid Dynamics Journal, Vol. 15, No. 1, pp. 35-43, 2006.

99

 C

Darbandi, M., Vakili, S., and Schneider, G.E., Employment of Algebraic Multigrid as a Preconditioner to Solve Fully Implicit Mixed Convection Equations, AIAA Paper 2006-0588, the 44th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, Jan. 9-12, 2006.

98

 C

Darbandi, M., and Vakilipour, S., Thermal Study at the Inlet of Microchannels, The 2nd International Conference on Thermal Engineering Theory and Applications, Al Ain, United Arab Emirates, Jan. 3-6, 2006.

2005 (selected journal and peer-reviewed conference papers)

96

J

Hosseinizadeh, S.F., and Darbandi, M., A Quasi-One-Dimensional Pressure-Based Solution for Subsonic Euler Flow Regime, Far East Journal of Applied Mathematics, Vol. 21, No. 2, pp.157-171, 2005.

94

 C

Darbandi, M., and Hosseinizadeh, S.F., A Robust Strategy to accelerate the convergence of compressible thermobuoyant flow solvers, 4th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics; HEFAT2005, Cairo, Egypt, Sep. 19-22, 2005

90

 J

Paillere, H., Le Quere, P., Weisman, C., Vierendeels, J., Dick, E., Braack, M., Dabbene, F., Beccantini, A., Studer, E., Kloczko, T., Corre, C., Heuveline, V., Darbandi, M., and Hosseinizadeh, S.F., Modelling of Natural Convection Flows with Large Temperature Differences: A Benchmark Problem for Low Mach Number Solvers. Part 2, ESAIM: Mathematical Modelling and Numerical Analysis, Vol. 39, No. 3, pp.617-621, May-June, 2005.

DOI: http://dx.doi.org/10.1051/m2an:2005025

88

 C

Darbandi, M., Zakyani, M., and Schneider, G.E., Evaluation of Different k-omega and k-epsilon Turbulence Models in a new Curvilinear Formulation, AIAA Paper 2005-5101, 17th AIAA Computational Fluid Dynamics Conference, Toronto, Canada, June 6-9, 2005.

84

 J

Darbandi, M., and Bostandoost S.M., A New Formulation Toward Unifying the Velocity Role in Collocated Variable Arrangement, has been accepted for publication in Numerical Heat Transfer; Part B: Fundamentals, Vol.47, No. 4, pp.361-382, April 2005.

DOI: http://dx.doi.org/10.1080/10407790590901620

82

 J

Darbandi, M., and Hosseinizadeh, S.F., ``A Two-Step Modification toward Implementing Compressible Source Terms in Low Compressible Flows, Journal of Aerospace Science and Technology, Vol. 2, No.1, pp.37-44, 2005.

76

 C

Darbandi, M., Banaeizadeh, A., and Schneider, G.E., ``Implicit Finite-Volume Method to Simulate Reacting Flow, AIAA Paper 2005-0574, the 43rd AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, Jan. 10-13, 2005.

2004 (selected journal and peer-reviewed conference papers)

72

 C

Darbandi, M., Taeibi-Rahni, M., and Naderi, A.R., ``Developing an Accurate Hybrid Grid Approach to Solve Turbulent Flow in Complex Geometries,'' in Recent Advances and Applications in Fluid Mechanics; Part 1, Editted by M.H. Al-hajeri, A.F. Al-Mudhaf, and M.E. Eleshaky, the proceedings of the International Mechanical Engineering Conference & Expo 2004, Kuwait, Dec. 5-8, 2004, Kuwait Society of Engineers, pp.167-183, 2004.

71

 B

Darbandi, M., Banaeizadeh, A., and Schneider, G.E., ``Parallel Computation of a Mixed Convection Problem Using Fully-Coupled and Segregated Algorithms,'' American Society of Mechanical Engineers, Heat Transfer Division (Publication) ASME-HTD Vol. 375, No.1, pp. 313-322, ASME, 2004.

70

 B

Niavarani-Kheiri, A., Darbandi, M., and Schneider, G.E., ``Parallelization of the Lattice-Boltzmann Method to Simulate Thermo-Hydrodynamic Problems with Free Convection,'' American Society of Mechanical Engineers, Heat Transfer Division (Publication) ASME-HTD Vol. 375, No.1, pp. 305-312, ASME, 2004.

69

 B

Darbandi, M., Schneider, G.E., and Taheri, S.A., Developing an Efficient Multigrid Strategy for Solving Incompressible Flow, American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, Vol. 260, pp.625-634, ASME, 2004.

68

 J

Darbandi, M., and Mokarizadeh V., A Modified Pressure-Based Algorithm to Solve the Flow Fields with Shock and Expansion Waves, Numerical Heat Transfer; Fundamentals B, Vol. 46, No.5, pp.497-504, Nov. 2004.

DOI: http://dx.doi.org/10.1080/10407790490487406

67

 B

Darbandi, M., Mazaheri-Body, K., and Vakilipour, S., A Pressure-Weighted Upwind Scheme in Unstructured Finite-Element Grids, in Numerical Mathematics And Advanced Applications, Editted by M. Feistauer, V. Dolejsi, P. Knobloch, and K. Najzar, Springer-Verlag, pp.250-259, Oct. 2004.

66

 J

Darbandi, M., and Hosseinizadeh, S.F., Remarks on Numerical Prediction of Wall-Shear-Stress in Entry Flow Problems, Communications in Numerical Methods in Engineering, Vol. .20, No. 8, pp.619-625, Aug. 2004.

DOI: http://dx.doi.org/10.1002/cnm.696

64

 C

Darbandi, M., and Niavarani-Kheiri, A., ``Parallel Simulation of Natural Convection Heat Transfer using Lattice Boltzmann Model,'' the First International Conference on Mesoscopic Methods in Science and Engineering (ICMMSE 2004), Braunschweig, Germany, July 26-30, 2004

62

 C

Darbandi, M., and Banaeizadeh, A., ``Parallel Computation of the Navier-Stokes Equations Using Implicit Finite Volume Method, Proceedings of the 4th European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 2004, Jyvaskyla, Finland, July 24-28, 2004

56

 C

Darbandi, M., and Taghvaey, M.J., ``A Computational Procedure to Improve Airfoil Performance Considering Shape and Flow Interactions, the 12th Annual Computational Fluid Dynamics Conference, (Ottawa, Canada), CFDSC, Ottawa, ON, Canada, May 9-11, 2004.

49

 C

Darbandi, M., Schneider, G.E., and Bostandoost, S.M., ``Parallel Computation of a Fully Implicit Finite Volume Method using Different Ordering Strategies, AIAA Paper 2004-0994, the 42nd AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, Jan. 5-8, 2004.

2003 (selected journal and peer-reviewed conference papers)

44

 B

Darbandi, M., Mazaheri-Body, K., and Vakilipour, S., ``A Pressure-Weighted Upwinding Scheme for Calculating Flow on Unstructured Grids,'' in Computational Methods in Sciences and Engineering, Edited by T.E. Simos, World Scientific Publishing Co., p. 138-143, Aug. 2003.

42

 J

Darbandi, M., and Hosseinizadeh, S.F., General Pressure-Correction Strategy to Include Density Variation in Incompressible Algorithms, AIAA Journal of Thermophysics and Heat Transfer, Vol.17, No.3, pp.372-380, July-Sep. 2003.

40

 J

Darbandi, M., and Schneider, G.E., Thermobuoyancy Treatment for Electronic Packaging Using an Improved Advection Scheme, ASME Journal of Electronic Packaging, Vol.125, pp.244-250, June 2003.

DOI: http://dx.doi.org/10.1115/1.1569508

39

 C

Darbandi, M., Taeibi-Rahni, M., Javadi, K., Javadi, A., and Schneider, G.E., ``Numerical Prediction on the Interaction of a Jet and a Turbulent Boundary Layer, AIAA Paper 2003-3730, the 33rd AIAA Fluid Dynamics Conference, Orlando, Florida, June 23-26, 2003

36

 C

Darbandi, M., Schneider, G.E., and Hosseinizadeh, S.F., ``A Quasi-One-Dimensional Pressure-Based Solution for Subsonic Euler Flow Regime,'' The 3rd International Conference on Computational Heat and Mass Transfer, Banff, Canada, pp.630-637, May 26-30, 2003.

31

 C

Darbandi, M., Schneider, G.E., Javadi, K., and Solhpour, N., ``The Performance of a Physical Influence Scheme in Triangular Grids, AIAA Paper 2003-0436, the 41st AIAA Aerospace Sciences Meeting and Exhibit, Reno, ND, Jan. 6-9, 2003.

prior to 2002

(Only selected journal publications)

28

 C

Darbandi, M., and Hosseinizadeh, S.F., ``A Two-Steps Modification Toward Implementing Density Variation,'' The Proceedings of the 9th Asian Congress of Fluid Mechanics, Isfahan, Iran, May 27-31, 2002.

22

 J

Darbandi, M., and Schneider, G.E., Performance of an Analogy-Based All-Speed Procedure without any Explicit Damping, Computational Mechanics, Vol.26, No.5, pp.459-469, Nov. 2000.

DOI: http://dx.doi.org/10.1007/s004660000194

20

 C

Darbandi, M., Schneider, G.E., and Mokarizadeh V., ``The Performance of Newton-Raphson Linearization in Collocated Schemes,'' the Proceedings of the 8th Annual Conference of the CFD Society of Canada, Montreal, Quebec, Canada, June 11-13, pp.160-166, 2000.

18

 C

Darbandi, M., Schneider, G.E., and Mokarizadeh V., ``A New Linearization Strategy for Treating Collocated Grid Schemes,'' AIAA Paper 2000-0342, 38th AIAA Aerospace Sciences Meeting & Exhibit, Reno, NV, January 10-13, 2000.

15

 J

Darbandi, M., and Schneider, G. E., Application of an All-Speed Flow Algorithm to Heat Transfer Problems, Numerical Heat Transfer, Part A, Vol. 35, No. 7, pp: 695-715, May 1999.

DOI: http://dx.doi.org/10.1080/104077899274985

13

 J

Darbandi, M., and Schneider, G. E., Numerical Study of the Flow Behavior in the Uniform Velocity Entry Flow Problem, Numerical Heat Transfer A, Vol. 34, No. 5, pp: 479-494, 1998.

DOI: http://dx.doi.org/10.1080/10407789808913999

11

 J

Darbandi, M., and Schneider, G. E., Comparison of Pressure-Based Velocity and Momentum Procedures for Shock Tube Problem, Numerical Heat Transfer B, Vol. 33, No. 3, pp. 287-300, April-May 1998.

DOI: http://dx.doi.org/10.1080/10407799808915034

10

 J

Darbandi, M., and Schneider, G. E., Analogy-Based Method for Solving Compressible and Incompressible Flows, AIAA Journal of Thermophysics and Heat Transfer, Vol. 12, No. 2, pp. 239-247, April-June 1998.

8

 J

Darbandi, M., and Schneider, G. E., Momentum Variable Procedure for Solving Compressible and Incompressible Flows, AIAA Journal, Vol. 35, No. 12, 1997.

1

 J

Alishahi, M. M., and Darbandi, M., Multiple-Zone Potential Solution around Wing-Body Configurations, Journal of Aerospace Engineering, Vol. 6, pp. 329-346, 1993.

http://dx.doi.org/10.1061/(ASCE)0893-1321(1993)6:4(329)


 

 Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: top of the pageHigh Performance Computing Lab:

The details are provided in HPCL web page.

 

 

 

 

 Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: top of the pageMajor Executive (Academic) Positions:

  • Head of Aerodynamics Division, Department of Aerospace Engineering, (2001-2003)
  • Head of Propulsion Division, Department of Aerospace Engineering, (2001-2003)
  • Associate Chair of Graduate Studies, Department of Aerospace Engineering (2003-2006)
  • AERO2008 Scientific Committee, Director, Sharif University of Technology, (2007-2008)
  • Head of Aerodynamics Division, Department of Aerospace Engineering, (2007-2009)
  • Head of Propulsion Division, Department of Aerospace Engineering, (2007-2009)
  • Consultant to Vice-Presidency of Research and Technology, Sharif University of Technology, (2007-2017)

 

 

Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: top of the pageSupervising:

·       Postdoctoral

1.    Prof. Ali Esmaeili, (2018-2020) (currently: a faculty member in Department of Mechanical Engineering, Ferdowsi University of Mashhad, Mashad, Iran)

ü  Micro Air Vehicles Research

·      Ph.D.

1.    Late Prof. Seyed Farid Hosseinizadeh, (2006) (currently: a faculty member in Department of Mechanical Engineering, Babol Noshirvani University of Technology, Babol, Iran)

§  Numerical Treatment of Thermobuoyant Flow Fields with High Temperature Gradients

 

2.    Prof. Khodayar Javadi (2007) (Jointed with Professor M. Taeibi-Rahni) (currently: a faculty member in Department of Aerospace Engineering, Sharif University of Technology, Tehran, Iran)

§  Numerical Simulation of Compressible/Incompressible Turbulent Jet-into-Crossflow; Introducing an Innovation in Augmenting Film Cooling Effectiveness

 

3.    Prof. Shidvash Vakilipour (2008) (currently: a faculty member in Faculty of New Sciences and Technology, University of Tehran, Tehran, Iran)

§  CFD Simulation of Flow and Heat in Micro- and Nano-Sizes

 

4.    Prof. Alireza Naderi (2009) (Jointed with Professor M. Taeibi-Rahni) (currently: a faculty member in Space Research Institute, Tehran, Iran)

§  Arbitrary-Lagrangian-Eulerian Approach to Solve Laminar and Turbulent Flows in Domains with Moving Grids and Boundaries

 

5.    Prof. Ehsan Roohi (2010) (currently: a faculty member in Department of Mechanical Engineering, Ferdowsi University of Mashhad, Mashad, Iran)

§  Hybrid Molecular-Continuum Approach to Simulate Gas Flow in Nano- and Micro-Propulsion Systems

 

6.    Prof. Nemat Fouladi, (2013) (currently: a faculty member in Iranian Space Research Center, Tehran, Iran)

§  Numerical Simulation of Fluid-Membrane-Interaction with Large Deformations

 

7.    Dr. Majid Ghafourizadeh (2016)

§  Numerical Analysis of Reacting Flow and Nanocarbon Soot Formation using Extended Reduced Chemistry Approach

 

8.    Dr. Hamidreza Ebrahimi-Kebria (2017) (currently: a faculty member in Space Research Institute, Tehran, Iran)

§  Advancement in Heat Transfer Simulations of Premixed Reacting Flames using Improved Reduced Chemistry Models

 

9.    Dr. Bagher Abrar (2017)

§  Numerical Development in Simulating Coupled Radiative, Convective, and Conductive Heat Transfer in Participating Media

 

10.Prof. Moslem Sabouri (2018) (currently: a faculty member in Department of Mechanical and Mechatronics Engineering, Shahrood University of Technology, Shahrood, Iran)

§  DSMC Simulation of Gas Mixing and Separation Processes

 

11.Dr. Somaye Jafari (2019) (Jointed with Professor M. S. Saeidi)

§  Application of Molecular-Dynamic and Dissipative-Particle-Dynamic Simulation Methods to Analyze the Performance of Nanostructure Sensors

 

12.Dr. A. Behroozifar, (2019)

§  Megawatt Wind Turbine Rotor Modeling and design considering Solid-Fluid Interaction

 

13.Jafari-Gahraz, Seyed Reza, (2019) (Jointed with Professor Tholudin bin Hj. Mat Lazim, Universiti Teknologi Malaysia, Malaysia)

§  Hybrid Experimental-Numerical Study to Improve the Actuator Disk Modeling of Megawatt Wind Turbine Blade Calculations

 

14.Barezban, M.B. (2023)

§  Developing Improved Radiation-Turbulent Interaction Model to Treat High Temperature Turbulent Reacting Flows

 

15.Dr. Ramin Jalali (2022)

§  Conjugate Heat Transfer Modeling of Gas Turbine Blade Internal Cooling System

 

16.AbdollahPour, M.S. (2021)

§  Experimental Study on Extra Compact Shall and Tube Heat Exchangers

 

17.Javadpoor, P. (2025)

§  To be specified

 

18.Zeydanlu. M. (2026)

§  To be specified

 

 

 

 

 

·      M.Sc.

1.       Mokarizadeh, V., (2000) (NEXT: Head of Energy and Environmental Research Center - Niroo Research Institute)

·           Advancement in shock capturing techniques using collocated finite volume method

2.        Solhpour N., (2001)

·           Performance of physical-based upwinding in hybrid finite element volume method

3.        Masroor, J., (2002) (NEXT: Ph.D. student in AmirKabir University of Technology, Tehran, Iran)

·           Landing gear shock absorber fluid flow simulation

4.        Taghvaei, M.J., (2002)

·           An innovation in shape optimization for multipurpose applications

5.        Safari, V., (2002)

·           Developing a new 3D finite volume element procedure

6.        Taheri, A., (2003)

·           Developing a new multigrid accelerator for fluid flow simulation and application

7.        Bostandoost, S.M., (2003) (NEXT: Ph.D. student in University of Pittsburg, Pittsburg, PA, USA)

·           A parallel computation strategy for fully implicit Navier-Stokes solvers

8.       Niavarani, A., (2004) (NEXT: Ph.D. student in Department of Mechanical Engineering, Michigan State University, Michigan, USA)

·           Developing finite-volume method in Lattice-Boltzmann techniques

9.       Banaeizadeh, A., (2004) (NEXT: Ph.D. student in Department of Mechanical Engineering, Michigan State University, Michigan, USA)

·           Developing a Robust Turbulent Reacting Flow Solver

10.   Zakyani, M., (2004) (NEXT: Ph.D. student in Department of Mechanical Engineering, Vrije Universiteit Brussel, Belgium)

·           Turbulent flow simulation on curved boundaries and its application on turbine blade film cooling

11.   Vakili, S., (2005) (NEXT: Ph.D. student in Department of Mechanical Engineering, University of British Columbia, B.C., Canada)

·           Developing new geometric multigrid and mesh sequencing accelerators to enhance turbulent reacting flow solution

12.     Panahi, M.J., (2005)

·           Non-Newtonian Fluid Flow Simulation

13.     Hassanzadeh, H., (2006) (NEXT: Ph.D. student in Laboratory of Thermodynamics in Emerging Technologies, ETH Zurich, Zurich, Switzerland)

·           Numerical solution of turbulent thermobuoyant flow fields with extensive temperature gradients

14.   Rikhtegar-Nezami, F., (2006) (NEXT: Ph.D. student in Laboratory of Thermodynamics in Emerging Technologies, ETH Zurich, Zurich, Switzerland)

·           Numerical trends in treating micro/nano channel flows using 2nd-order slip velocity treatment

15.   Nazari, A., (2007) (NEXT: Ph.D. student in Department of Mechanical Engineering, Imperial College of London, London, Great Britain)

·           The Aerodynamics study of 3D light weight human-powered airplane

16.   Jafari Gahraz, S.R., (2007) (NEXT: Ph.D. student in Department of Mechanical Engineering, Universiti Teknologi Malaysia, Malaysia)

·           Heat and Flow control beside porous domain

17.   Haghdoost, A., (2007) (Jointed with Professor A. Molaei-Dehkordi from Chemical Engineering Department) (NEXT: Ph.D. student in Department of Chemical Engineering, University of Virginia, Charlottesville, USA)

·           Experimental and numerical study of mass transfer into contaminated single drops liquid-liquid extraction

18.   Daghighi, Y., (2007) (NEXT: Ph.D. student in Department of Mechanical Engineering, University of Waterloo, Waterloo, Canada)

·           Developing the second-order finite-element formulation to treat flow in nanoscales

19.   Mazaheri, I., (2007) (Jointed with Professor A. Molaei-Dehkordi from Chemical Engineering Department)

·           A level-set finite element modeling of mass transfer into contaminated single drops liquid-liquid extraction

20.   Ghafourizadeh, M., (2007) (NEXT: Ph.D. student in Department of Aerospace Engineering, Sharif University of Technology, Tehran, Iran)

·           Developing a novel FEV method to solve the diffusive flame in the cylindrical coordinates

21.   Molaverdikhani, K., (2007)

·           Numerical modeling of Terrestrial planet temperature distribution effect on polar vortex forming: Modeling of Venus

22.   Yousofian, S., (2007) (jointed with Prof. A. Ghafourian, Department of Aerospace Engineering)

·           Reduced kinetic modeling of auto ignition in methane/air mixture

23.   Farzinpour, P., (2008) (NEXT: Ph.D. student in Mechanical Engineering Department, Temple University, Philadelphia, USA)

·           Numerical Simulation of Electroosmotic Flow in Microchannels; Introducing a Novel Approach to Improve the Accuracy

24.   Setayeshgar, A., (2008) (NEXT: Ph.D. student in Department of Mechanical Engineering, University of Alberta, Edmonton, Canada)

·           Study of microflow over nano-particles using the Lattice-Boltzmann Method

25.   Mirjalili, V., (2008) (NEXT: Ph.D. student in Department of Mechanical Engineering, Michigan State University, Michigan, USA)

·           Simulation of flow in micro- and nano-propulsion systems using direct simulation Monte Carlo method and parallel computing clusters

26.   Mokhtabad, F., (2008)

·           Micro diffusion flame simulation in micro-reacting systems

27.   Aalami, N., (2008)

·           Simulation of Solid-Fluid Interaction; Presenting an Innovation to enhance the Performance of Aerodynamics Configurations

28.   AKhlaghi, H., (2009)

·           Numerical Simulation of Nano-Impinging-Jet in Lab-on-Chip Cooling Applications

29.   Bagheri, A.H., (2009)

·           Numerical and Experimental Study of Dry Cooling Tower Heat Performances

30.   Sabouri, M., (2009) (NEXT: Ph.D. student in Department of Aerospace Engineering, Sharif University of Technology, Tehran, Iran)

·           Study of Hydrogen Absorption by Nanotubes with Fuel Cell Implementation Using Molecular Dynamics Simulation

31.   Zakeri, R., (2009)

·           Dissipative-Particle-Dynamics Simulation of Electroosmotic Flow in Nanoscales

32.   Abbassi, H.R., (2010)

·           Solid-liquid Heat Transfer Modeling in Nanoscales Using Molecular Dynamics Simulation

33.   Ebrahimi M., (2010) (Jointed with Professor M. Abbaspour from Department of Mechanical Engineering) (NEXT: Ph.D. student in Department of Mechanical Engineering, Sharif University of Technology, Tehran, Iran)

·           Design of optimum oscillatory motion of robofish body using CFD

34.   Karchani, A., (2010)

·           Developing 3D DSMC Solver on Unstructured Grids to Design and Simulate Micro/Nanofilters

35.   Khaledi, R.A., (2010) (Jointed with Professor M. Abbaspour from Department of Mechanical Engineering)

·           Molecular Dynamics Simulation of Nanorobot Motion in Nanoscale Flows

36.   Fard, M., (2011)

·           CFD Simulation of simultaneous gas-liquid-solid Phases and ice growth

37.   Malekzadeh, M., (2011)

·           Conceptual Design of Airplane Anti-ice System

38.   Saboohi, Z., (2011)

·           CFD Simulation of Wind Tunnel Driving System Consisted of three Axial Fans

39.   Mosayebi, G., (2012)

·           Developing 3D DSMC Solver on Unstructured Grids to Simulate Supersonic and Hypersonic Rarefied Gas Flows over Micro/Nanosensors

40.   Lotfi, I., (2012)

·           Design and Simulation of a Wind Tunnel Consisted of two Replaceable Test Sections

41.   Tootiaee, F., (2012)

·           Simulation and Design of Special Compact Gas-Gas and Gas-Liquid Heat Exchangers

42.   Rabiei-Beheshti, A., (2012)

·           CFD Simulation of wing ice Growth in Supercooled Droplet environment

43.   Golsefatan, M., (2012)

·           CFD Simulation and design of Gas and Gas-Liquid Incinerator systems

44.   Salemkar, H., (2012)

·           Extending Some Aerodynamic Shapes to Improve the Thermal Performance of Dry Cooling Towers

45.   Lekzian, E., (2012)

·           DSMC Simulation of Nano-Propulsive Hot Gas Mixing Processes

46.   Asgari, E., (2012)

·           Numerical Simulation of Frosting in High Pressure Pneumatic Systems

47.   Mohajer-Hejazi, S. A., (2013)

·           The Improvement in Transition to Turbulence Modeling in Wind Turbine Rotor Simulation and Design

48.   Modarres, M.R., (2013)

·           Simulation of Hydrocarbon Waste-Gas Combustion in Incinerator and its Pollution Control

49.   Hosseinzadeh-Sereshgi, M., (2013)

·           The Study to Improve the Waste Gas and Air Mixing in an Incinerator Using CFD

50.   Aghabeigi, A., (2014)

·           Hybrid Numerical-Experimental Simulation of Unsteady Multi-phase Flow through High Pressure Hydro-Pneumatic Systems

51.   Barezban, M.B. (2014)

·           Developing A Powerful Non-Gray Gas Modeling of Radiation Heat Transfer for Industrial Applications, e.g., Refinery Boilers

52.   Fouladi, H. (2014)

·           Multi-Objective Optimization of a Megawatt Wind Turbine Blade Geometry Using an Evolutionary Algorithm

53.   Mirhashemi, A. (2014)

·           Design of an Optimized air-Liquid Auxiliary Heat Exchanger to improve performance of a Rankin cycle using CFD

54.   Zaretabar, M. (2014)

·           Simulation of Surface oil Spill in the Persian Gulf; Case Study of Asalouyeh Marine Region

55.   Jalali, R. (2015)

·           The Optimization Effect of Rotor Deflection on the Aerodynamic Performance of Megawatt Wind Turbine Using the Actuator Line Model

56.   Karimi, S. (2015)

·           Improving the Performance of a Hybrid Hot/Cold Laboratory Microthruster Using CFD Analysis

57.   Niyafar, S.O. (2015)

·           Numerical Simulations of Air Cooled Condenser Performances for possible side improvements

58.   Soltanieh-Jahromi, H. (2015) (Jointed with Professor A. Ebrahimi from Department of Aerospace Engineering)

·           Design of Small Scale Vertical Axis Wind Turbine using CFD

59.   Tari, M. (2015)

·           Thermo-Hydrodynamic design of a Thermal Wind Tunnel Design considering Three Test Sections using CFD

60.   Atarodi, M. (2016)

·           Gas Turbine Failure Predictions

61.   Khorshidi, H.R. (2016)

·           Design of Advanced Systems to Improve the Performance of Air Cooled Condensers

62.   Foroozesh, M.M. (2016) (Jointed with Professor A. Ebrahimi from Department of Aerospace Engineering)

·           Multi-Megawatt Wind Turbine Blade Design and Optimization imposing both Roughness and 3D effects

63.   Javadpoor, p. (2017)

·           Using Advanced Modern Systems to Improve the Performance of Dry Cooling Towers

64.   Kohanpur, M.J., (2017) (Jointed with Professor A. Ebrahimi from Department of Aerospace Engineering)

·           Airplane Fluttering Analyses

65.   Taherzadeh, S., (2017)

·           CFD Simulations of Large Scale Heat Exchangers

66.   Sabzpoushan, S.A. (2017)

·           The use of Ejector in Improving the Performance of Hybrid Thermal Powerplants

67.   Fatin, A., (2017)

·           Liquid Fuel Reacting Flow Simulations

68.   Kargarian. A., (2017)

·           Solid-Fluid Interaction Considerations in Megawatt Turbine Analyses

69.Hassanpour, M.R., (2019)

·           Compact Heat Exchanger Simulation

70.Mashayekh, K., (2019)

·           Heat Pipe Simulation and Analyses

71.Sajadi, A., (2021)

·           Gas Turbine Blade Internal Film Cooling Simulations

72.Khademi, A.R., (2021) (Jointed with Professor M. B. Shafii)

·           Experimental Study on Phase Change Material; possibly for Energy Storage Systems

73.Abtahi, S.A., (2021)

·           Analytical Prediction of Thermal Performances of Super Compact Heat Exchangers

74.Mirzakhani, H., (2022)

·           Solid Particle Erosion in Impeller of Centrifugal Fans

75.Pourfallah, M.M., (2022)

·           Numerical and Experimental studies of Air Compact Heat Exchangers

76.Babaei, M. A., (2022)

·           Gas Turbine Inlet Air Fogging Design and Optimization

77.Bagherzadeh, A., (2023)

·           CFD Modeling of Air Classification of Solid particles

78.Yadollahpour, H., (2022)

·        CFD Modeling of Gas-Solids Multiphase Flow

 

79.Karami, M., (2025)

·        CFD Modeling of Turbomachinery Flows

 

80.Ameli, M., (2025)

·        CFD Modeling of Combusting Systems

 

 

Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: top of the page

·       B.Sc. (few of them; the list has not been updated since 2013)

o   Prof. Mir Yoseph Hashemi, (2003) (currently: a faculty member in Faculty of Engineering, Azarbaijan Shahid Madani University, Azarbaijan, Iran) Fuel Spraying Tactics in Internal Combustion Engines

o   Rafiei, Y., (2003) Real gas simulation in hypersonic flow fields

o   Zolfi, A., (2003) Real gas simulation in hypersonic flow fields

o   Kiaei, M., (2003) Real gas simulation in hypersonic flow fields

o   Ordokhani, A., (2004) Flow modelling in turbojet combustor I

  • Roohi, E., (2004) Advances in non-splitting shock capturing techniques using collocated finite volume method
  • Farzinpour, P., (2006) The impact of partition in thermobuoyant fields with high gradient temperatures
  • Mashayekhi, F., (2006) Flow modelling in turbojet combustor II
  • Yazdani, H.R., (2006) Flow modelling in turbojet combustor II, the impact of secodary flow injection
  • Mirjalili, V., (2006) (jointed with Prof. Firoozabadi) Simulation of film cooling over turbojet blades
  • Hedayatzadeh, S.A.R., (2006) CFD modelling of micro-thrust vectoring in aero-engines
  • Gomroki, M.M., (2011) Chemical Reacting Analysis of Foulad Iran Steel Rolling Industry Furnace
  • Azargoun, A., (2012) Prediction of Icing in in Iran Flight Atmosphere
  • Izak-Ghasemian, S., (2013) Innovation in Heller Cooling Tower Systems
  • Taherzadeh, S., (2013) Innovation in Heller Cooling Tower Systems
  • Niyafar, S. O., (2013) Modeling and Simulation of Refinery Incinerators
  • Tari, M., (2013) Flame Improvement in Refinery Incinerators using CFD
  • Noroozi, E., (2013) Wind Tunnel (with four running fans) Modeling and Simulation
  • Jalali, R., (2013) Megawatt Wind Turbine Rotor Profile Optimization

Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: top of the pageResearch Assistants (Just few of them; not updated since 2012):

o   Torabi, S.O., (2003-2007) (Ph.D. student in Deptartment of Civil Engineering, Sharif University of Technology

    • Seepage through porous media

o   Saadat M., (2004-2006) (NEXT: M.Sc. student in Nanyang Technological University, School of Mechanical and Aerospace Engineering, Singapore)

    • Seepage simulation and modelling

o   Mousaviraad, S.M., (2005) (NEXT: Ph.D. student in The University of Iowa)

    • Progress in ship resistance modelling and calculations

o   Sadathosseini, S.H., (2005) (NEXT: Ph.D. student in The University of Iowa)

    • Progress in ship resistance modelling and calculations

o   Ghavami, A., (2005-2006)

    • Boundary layer transition control over supersonic flow configurations

o   Setayeshgar, A., (2005-2006) (NEXT: Ph.D. student in Department of Mechanical Engineering, University of Alberta, Edmonton, Canada)

    • Improving Aerodynamic characteristics over multielement airfoil configurations

o   Kazemi-Oskoii, S.A., (2005-2006) (NEXT: Ph.D. student in Department of Mechanical and Industrial Engineering, University of Toronto, Canada)

    • Shock phenomenon study through expanded supersonic flow passages

o   Ghaemi, S., (2005-2006) (NEXT: M.Sc. student in University of Alberta, Canada)

    • Shock phenomenon study through expanded supersonic flow passages

o   Hanafizadeh, P., (2006) (a Postdoctoral Fellow in Deptartment of Mechanical Engineering, , Sharif University of Technology, Iran)

    • Simulation of multiphase flow pumping

o   Jarrahbashi, D., (2006-2008) (NEXT: Ph.D. student in Department of Mechanical and Aerospace Engineering, University of California, Irvine, USA)

    • Shock phenomenon study through expanded supersonic flow passages

o   Sadeghi, H., (2007-2010) (NEXT: Ph.D. student in Department of Mechanical and Materials Engineering, Queen's University, Canada)

    • Cavitation in internal flow problems

o   Khodadadi, M., (2010-2011) (Department of Chemical and Petrolium Engineering, Sharif University of Technology, Iran)

    • Design of incinerator systems

o   Aghabeigi, A., (2011-2012) (Department of Aerospace Engineering, Sharif University of Technology, Iran)

    • High Pressure Pneumatic Systems

Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: top of the pageContact:

Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: phone

Phone: +98 (21) 6616-4644

 

 

Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: H:\Academic\Homepages\Masoud\c_files\fax.gif

Fax: +98 (21) 6602-2731

 

 

Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: H:\Academic\Homepages\Masoud\c_files\email_anim.gif

Email: darbandi@sharif.edu

 

 

 

·       Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: top of the page Photos:

Sunny Spring day in Sharif University (view from my office window (April)

Winter time in Sharif University (view from my office window (January))

 

 

 

Spring rainy days in Sharif University (view from my office window (May))

Last update: February 23/2023