33. Reza Moheimani, M.T. Ahmadian, “On Free Vibration of Functionally Graded Euler-Bernoulli Beam Models Based On the Non-Local Theory”, Proceedings of The Asme 2012 International Mechanical Engineering Congress & Exposition IMECE2012 November 9-15, 2012

34. E.Taati, M. Nikfar, M.T. Ahmadian, “Formulation for static behavior of the viscoelastic Euler-Bernoulli micro-beam based on the modified couple stress theory”, Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012 November 9-15, 2012

35. M. T. Ahmadian, A. Gobal, R. Alkhani, “Estimation of Modulus of Elasticity for Closed-cell Aluminum Foam”, Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012 November 9-15, 2012

36. Ali Darvishian, Hamid Moeenfard, Mohammad Taghi Ahmadian, “Static Pull-In Analysis of Micro-Contilevers in Wet Echting Fabrication Process”, Proceedings of The Asme 2012 International Mechanical Engineering Congress & Exposition IMECE2012 November 9-15, 2012

37. Ali Darvishian, Hamid Moeenfard, Mohammad Taghi Ahmadian, “IFLUECE OF FRINGING FIELD EFFECT OF THE PULL-IN OF SIZE DEPEDET MICRO-BEAMS”, Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012 November 9-15, 2012

38. Ali Darvishian, Hamid Moeenfard, Nasser Ghaderi Mohammad Taghi Ahmadian, “CHARACTERIZATION OF STATIC BEHAVIOR OF ELECTROSTATICALLY ACTUATED MICRO TWEEZERS USING MODIFIED COUPLE STRESS THEORY”, Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012 November 9-15, 2012

39. Ali Karimzade, Hamid Moeenfard, Mohammad Taghi Ahmadian, “Nonlinear Analysis of Pull-In Voltage for A Fully Clamped Microplate with Movable Base”, Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012 November 9-15, 2012

40. Ali Karimzade, Mohammad Taghi Ahmadian, Hamidreza Asemani, “Nonlinear Analysis of Pull-In Phenomenon and Maximum Deflection of Mems with Movable Base Under Capillary and Van der Waals Forces”, Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012 November 9-15, 2012.

41. Saeed Mostaani, Dara Singh, Keykhosrow Firouzbakhsh, Mohammad Taghi Ahmadian, "Optimization of a passive vehicle suspension system for ride comfort enhancement with different speeds based on DOE method", Proc. of Int. Colloquiums on Computer Electronics Electrical Mechanical and Civil, New Dehli, 2011.

42. Dara Singh, Keykhosrow Firouzbakhsh, Mohammad Taghi Ahmadian, " Effect of the human eye cornea material property on measurement of the intraocular eye pressure utilizing Goldmann applantation tonometer", Proc. of Int. Colloquiums on Computer Electronics Electrical Mechanical and Civil, New Dehli, January 2011.

43. K. Firoozbakhsh, M. Hasanian, M. T. Ahmadian. "Simulation of Red Blood Cell Passing Through Constrictions Using Modified Moving Particle Semi-Implicit Method”, Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

44. M. H. Kahrobaiyan, M. Khajehpour, M. T. Ahmadian. "A Size-Dependent Beam Element Based On The Modified Couple Stress  Theory " , Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado,USA.
 

45. M. Nabian, M. T. Ahmadian. " Multi-Objective Optimization of Functionally Graded Hollow Cylinders", Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

46. H. Mazaheri, A. Hosseinzadeh, M. T. Ahmadian, A. Barari. " Analytical Approach to Vibration Analysis of a Pendulum Wrapping On a Cylinder", Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

47. Hashem Mazaheri, Ali Hosseinzadeh, Mohammad T. Ahmadian, Ahmad Barari. " Nonlinear Vibration Analysis of a Micro Beam Exposed to an External Flow" , Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.
 

48. Mohammad-Taghi Ahmadian, Mohammad-Hosein Kargarnovin, Ramazan-Ali Jafari-Talookolaei. " Dynamic Analysis Of A Delaminated Composite Beam Due To A Moving Oscillatory Mass" , Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.
 

49. M. Hadipour, M. T. Ahmadian, S. G. Lashkari, A. Barari. " Natural Frequency Improvement of a Suspended FGM Bridge" , Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

50. Hamid Moeenfard, Ali Darvishian, Mohammad Taghi Ahmadian. " Closed Form Solutions for The Statical Behavior of Micromirrors Under Capillary Forces", Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

51. Hamid Moeenfard, Ali Darvishian, Mohammad Taghi Ahmadian. " Analytical Solutions for The Static Instability of Micro/Nano Mirrors Under the Combined Effect of Capillary Force and Casimir Force", Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

52. Hamid Moeenfard, Ali Darvishian, Mohammad Taghi Ahmadian, Hasan Zohoor. " Closed Form Solutions for The Problem of Statical Behavior of Nano/Micromirrors Under the Effect of Capillary Force and Van der Waals Force", Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

53. E. Khosravani, M. H. Kahrobaiyan, M. T. Ahmadian. " Resonant Frequency and Sensitivity of an Afm Microcantilever Modeled by The Non-Local Theory", Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

54. M. H. Kahrobaiyan, M. T. Ahmadian, K. Firoozbakhsh, A. Fallah, S. Bozorgzadeh. "On the Static Pull-In of Circular Microplates Under Capillary Force" , Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

55. Hamid Moeenfard, Ali Darvishian, Mohammad T. Ahmadian. "Coupling Effects Between Torsion and Bending in Torsional Micromirrors Under Capillary Forces", Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

56. Hamid Moeenfard, Ali Darvishian, Mohammad Taghi Ahmadian. "A Coupled Model Between Torsion and Bending in Nano/Micromirrors Under the Combined Effect of Van der Waals Force and Capillary Force", Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

57. Hamid Moeenfard, Mohammad T. Ahmadian, Hosein Moeenfard. "Closed Form Solutions For Electrostatically Actuated Micromirrors Considering The Bending Effect" , Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

 

58. Masoud Nasiri Sarvi, M. T. Ahmadian, Ahmad Barari. " Deformation and Stress Analysis of the Fullerene by Super Element" , Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

59. Masoud Nasiri Sarvi, M. T. Ahmadian. " Comparison of Deformation Analysis of A Biological Cell Under An Injection Force Using Analytical, Experimental And Finite Element Methods And Artificial Neural Network", Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

60. Mohammad Taghi Ahmadian, Golsa Ghanati, Keikhosrow Firoozbakhsh, Parsa Ghanati. " The Nonlinear Finite Element Analysis of a Novel Dental Implant with an Interposed Internal Layer imitating periodontal ligament’s function", Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

61. Ali A. Abbasi, G. R. Vossoughi, M. T. Ahmadian. "Deformation Prediction of Mouse Embryos In Cell Injection Experiment By A Feedforward Artificial Neural Network", Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011, August 28-31, 2011, Washington, DC, USA.

62. Hamid Faghani, M. T. Ahmadian. "Design A New Spherical Super element to Static and Modal Analysis of spherical" , Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011, August 28-31, 2011, Washington, DC, USA.

63. R. Saljooghi, M. T. Ahmadian. "Free Vibration Analysis Of Fgm Beams With Different Boundary Conditions Using Rkpm Meshless Method" , Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011, August 29-31, 2011, Washington, DC, USA.

64. Hamed Moradi, Mohammad R. Movahhedy, Gholamreza Vossoughi, Mohammad T. Ahmadian. "Investigation of the Internal Resonance and Regenerative Chatter Dynamics in Nonlinear Milling Process", Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011, August 28-31, 2011, Washington, DC, USA.

65. Y. Alizadeh Vaghasloo, Abdolreza Pasharavesh, M. T. Ahmadian, Ali Fallah. "Static Analysis Of Electrically Actuated Nano To Micron Scale Beams Using Nonlocal Theory", Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011, August 28-31, 2011, Washington, DC, USA.

66. M. T. Ahmadian, Abdolreza Pasharavesh, Ali Fallah. "Application Of Nonlocal Theory In Dynamic Pull-In Analysis Of Electrostatically Actuated Micro And Nano Beams”, Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011, August 28-31, 2011, Washington, DC, USA.

67. Hamid Moeenfard, Mohammad Taghi Ahmadian, Anoushiravan Farshidianfar.  "Analytical Modeling Of Squeeze Film Damping In Micromirrors" , Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011, August 28-31,  2011,Washington DC, USA.

68. Masoud Nasiri Sarvi, M. T. Ahmadian. "Application Of A New Spherical Super Element In Predicting The Deformation Of Biological Cells In Microinjection”, Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011, August 28-31, 2011, Washington DC, USA.

69. Masoud Nasiri Sarvi, M. T. Ahmadian. “Deformation, Stress And Natural Frequency Analysis Of The Fullerene By Finite Super Element Method", Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011, August 28-31, 2011, Washington, DC, USA.

70. Mohamad Shafiee Motahar, Mohammad Taghi Ahmadian. “Vibrational Analysis Of Wavy Carbon Nanotube-Reinforced Composites”, Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011, August 28-31, 2011, Washington, DC, USA.

71. Abdolreza Pasharavesh, Y. Alizadeh Vaghasloo, M. T. Ahmadian, Reza Moheimani. " Nonlinear Vibration Analysis Of Nano To Micron Scale Beams Under Electric Force Using Nonlocal Theory" , Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011, August 28-31, 2011, Washington, DC, USA.

72. M.T. Ahmadian, G.R. Vossoughi, A.A. Abbasi, P.Raeissi. “Modeling of Cell Deformation Under External Force Using Artificial Neural Network”, Proceedings of The Asme 2010 International Mechanical Engineering Congress & Exposition Imece2010, November 12-18, 2010, Vancouver, British Columbia, Canada

73. M.T. AHMADIAN, K. FIROOZBAKHSH, M. HASANIAN. “Simulation of Red Blood Cell Mechanical Behavior in Optical Tweezers Experiment Based On a Particle Method”, Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition IMECE2010, November 12-18, 2010, Vancouver, British Columbia, Canada

74. M.H. Kahrobaiyan, M.T. Ahmadian, P. Haghighi, A. Haghighi. “An Investigation On the Flexural Sensitivity and Resonant Frequency of an Afm with Sidewall and Top-Surface Probes”, Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition IMECE2010, November 12-18, 2010, Vancouver, British Columbia, Canada

75. Abdolreza Pasharavesh, Y. Alizadeh Vaghasloo, M.T. Ahmadian, Reza Moheimani. “Vibration Of A Microbeam Under Ultra-Short-Pulsed Laser Excitation Considering Momentum And Heating Effect”, Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition IMECE2010, November 12-18, 2010, Vancouver, British Columbia, Canada

76. Abdolreza Pasharavesh, M.T. Ahmadian, Y. Alizadeh Vaghasloo, A. Assempour. “Effect of Microbeam Electrical Resistivity On Dynamic Pull-In Voltage of an Electrostatically Actuated Microbeam”, Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition IMECE2010, November 12-18, 2010, Vancouver, British Columbia, Canada

77. M.T. Ahmadian, Masoud Nasiri Sarvi, Amir Ashkan Nasiripour. “Deflection and Vibration Analysis of a Spherical Structure Using a Newly Designed Spherical Super Element”, Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition IMECE2010, November 12-18, 2010, Vancouver, British Columbia, Canada

78. Mahdi Mojahedi, Mahdi Moghimi Zand, Mohammad Taghi Ahmadian. “Investigation of the oscillatory behavior of electrostatically-actuated microbeams”, Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition IMECE2010, November 12-18, 2010, Vancouver, British Columbia, Canada

79. Mahdi Mojahedi, Hamid Moeenfard, Mohammad Taghi Ahmadian. “Nonlinear Vibration and Buckling Analysis of Beams Using Homotopy perturbation Method”, Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition IMECE2010, November 12-18, 2010, Vancouver, British Columbia, Canada.

80. Farid Tajaddodianfar, Mohammad Taghi Ahmadian, Gholamreza Vossoughi. “Robust Stable Control of Haptic Devices Based On Transparency Maximization”, Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition IMECE2010, November 12-18, 2010, Vancouver, British Columbia, Canada

81. H. Moeenfard, M. H. Kahrobaiyan, M. T. Ahmadian. “Application of The Extended Kantorovich Method to The Static Deflection of Microplates Under Capillary Force”, Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition IMECE2010, November 12-18, 2010, Vancouver, British Columbia, Canada

82. Abdolreza Pasharavesh, Y. Alizadeh Vaghasloo, A. Fallah, M.T. Ahmadian. “Control of Vibration Amplitude, Frequency and Damping of an Electrostatically Actuated Microbeam Using Capacitive, Inductive and Resistive Elements”, Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE2010, August 15-18, 2010, Montreal, Quebec, Canada

83. Hosseinzadeh, M.T. Ahmadian. “Application of Piezoelectric and Functionally Graded Materials in Designing Electrostatically Actuated Micro Switches”, Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE2010, August 15-18, 2010, Montreal, Quebec, Canada

84. Abdolreza Pasharavesh, M.T. Ahmadian, Y. Alizadeh Vaghasloo. “Effect of Microbeam Electrical Resistivity On Vibration Frequency Shift of an Electrostatically Actuated Microbeam”, Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE2010, August 15-18, 2010, Montreal, Quebec, Canada

85. M.T. Ahmadian, M.H. Kahrobaiyan, P. Haghighi, A. Yousefi. “Torsional Sensitivity and Resonant Frequency of an Afm with Parallel Sidewall Probes”, Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE2010, August 15-18, 2010, Montreal, Quebec, Canada

86. M.H. Kahrobaiyan, M.T. Ahmadian, P. Haghighi, A. haghighi. “An Investigation On the Torsional Sensitivity and Resonant Frequency of an Afm with Sidewall and Top-Surface Probes”, Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE2010, August 15-18, 2010, Montreal, Quebec, Canada

87. Hamid Moeenfard, Mohammad Taghi Ahmadian, Ali Soroush, Aria Alasty. “Beyond Pull-In Stabilization of Dual Axis Micromirrors Using Fuzzy Controllers”, Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE2010, August 15-18, 2010, Montreal, Quebec, Canada

88. M.M. Rezaei, M.R. Movahhedy, M.T. Ahmadian, H. Moradi. “Development of Inverse Receptance Coupling Method for Prediction of Milling Dynamics”, Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis ESDA2010, July 12-14, 2010, Istanbul, Turkey

89. M. Rahaeifard, M.H. Kahrobaiyan, S.A. Moeini, M.T. Ahmadian, M. Hoviattalab. “Flexural Sensitivity of a V-Shaped Afm Cantilever Made of Functionally Graded Materials”, Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis ESDA2010, July 12-14, 2010, Istanbul, Turkey

90. S.A. Moeini, M. Rahaeifard, M.T. Ahmadian, M. Movahhedy. “Free Vibration Analysis of Functionally Graded Cylindrical Shells Stiffened by Uniformly and Non-Uniformly Distributed Ring Stiffeners”, Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition IMECE2009, November 13-19, Lake Buena Vista, Florida, USA

91. M.T. Ahmadian, G. Vossoughi, F. Tajaddodianfar. “Control Design and Passivity Analysis for Scaled One-Dimensional Bilateral Teleoperated Nanomanipulation”, Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition IMECE2009, November 13-19, Lake Buena Vista, Florida, USA

92. Mahdi Mojahedi, Hamid Moeenfard, Mohammad Taghi Ahmadian. “Analytical Solutions for the Static Instability of Nano-switches under the Effect of Casimir Force and Electrostatic Actuation”, Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition IMECE2009, November 13-19, Lake Buena Vista, Florida, USA

93. Mahdi Mojahedi, Hamid Moeenfard, Mohammad Taghi Ahmadian, “Investigation of Casimir and Van der Waals Forces for a Nonlinear Double-Clamped Beam Using Homotopy Perturbation Method”, Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition IMECE2009, November 13-19, Lake Buena Vista, Florida, USA

94. S.A.Moeini, M.H.Kahrobaiyan, M.Rahaeifard, M.T.Ahmadian. “Optimization of First Mode Sensitivity of V-Shaped Afm Cantilever Using Genetic Algorithm Method”, Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition IMECE2009, November 13-19, Lake Buena Vista, Florida, USA

95. Mahdi Behzad, Hamid Moeenfard, Mohammad Taghi Ahmadian. “Application of The Extended Kantorovich Method to The Vibrational Analysis of Electrically Actuated Microplates”, Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition IMECE2009, November 13-19, Lake Buena Vista, Florida, USA

96. M. Moghimi Zand, M.T. Ahmadian, B. Rashidian. “Dynamic pull-in instability of initially curved microbeams”, Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition IMECE2009, November 13-19, Lake Buena Vista, Florida, USA

97. F. Tajaddodianfar, M.T. Ahmadian, G.R. Vossoughi, M. Motamedi. “Transparency Enhancement of Haptic Systems Based On Compensation of Device Dynamics”, Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition IMECE2009, November 13-19, Lake Buena Vista, Florida, USA

98. M. Rahaeifard, S.A. Moeini, M.H. Kahrobaiyan, M.T. Ahmadian. “Vibration Analysis of a Rotating Fgm Cantilever Arm”, Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition IMECE2009, November 13-19, Lake Buena Vista, Florida, USA

99. M. Moghimi Zand, B. Rashidian, M.T. Ahmadian. “Contact Time Study of Microsystems Actuated by Ramp-Input Voltages”, Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition IMECE2009, November 13-19, Lake Buena Vista, Florida, USA

100.  Mahdi Mojahedi, Mahdi Moghimi Zand, Mohammad Taghi Ahmadian. “ON THE PRIMARY RESONANCE OF AN ELECTROSTATICALLY ACTUATED MEMS USING THE HOMOTOPY PERTURBATION METHOD”, IDETC/CIE 2009, August 30 - September 2, 2009, San Diego, California, USA

101.   Saeed Hashemnia, Mohammad T. Ahmadian. “Different Optimization Criteria for Vehicle Seat Suspension Control: Position versus Acceleration”, IDETC/CIE 2009, August 30 - September 2, 2009, San Diego, California, USA

102.    Hamed Moradi, Mohammad T. Ahmadian, Firooz Bakhtiari Nejad. “Nonlinear Oscillation and Stability Analysis of the Turning Process with A Worn Tool”, IDETC/CIE 2009, August 30 - September 2, 2009, San Diego, California, USA

103. M.T. Ahmadian, M.H. Kahrobaiyan, M. Rahaeifard. “Sensitivity Analysis of Atomic Force Microscope Cantilever Made of Functionally Graded Materials”, DETC2009-86254, August 30 – September 2, 2009, San Diego, CA, USA

104. M.H. Kahrobaiyan, M. Rahaeifard, M.T. Ahmadian. “Torsional Sensitivity of the First Four Modes of an Afm Cantilever with A Sidewall Probe Using Analytical Method”, Proceedings of the 3rd International Conference on Micro- and Nanosystems MNS3, DETC2009-87035, August 30 – September 2, 2009, San Diego, CA, USA

105. S. ahmad tajalli, M.T. ahmadian, mostafa pirmoradian. “Dynamic pull-in analysis of Circular and Rectangular microplates under the squeeze-film damping effect”, 16th. Annual (International) Conference on Mechanical Engineering-ISME2008, May 14-16, 2008, Shahid Bahonar University of Kerman, Iran

106. Mohammad Taghi Ahmadian, Hamid Moeenfard, Tohid Pirbodaghi. “Static Deflection of Electrically Actuated Microplates, an Extended Kantorovich Approach”, 16th. Annual (International) Conference on Mechanical Engineering-ISME2008, May 14-16, 2008, Shahid Bahonar University of Kerman, Iran

107.  Mohammad Taghi Ahmadian, Hamid Moeenfard, Tohid Pirbodaghi. “Application of The Extended Kantorovich Method to The Static Deflection of Electrically Actuated Microplates”, Proceedings of IMECE2008 2008 ASME International Mechanical Engineering Congress and Exposition October 31-November 6, 2008, Boston, Massachusetts, USA

108.  S. Ahmad Tajalli, Mahdi Moghimi Zand, Mohammad Taghi Ahmadian. “Dynamic Analysis of Electrically Actuated Rectangular Microplates with Nonlinear Plate Theory under Squeeze-Film Damping Effect”, Proceedings of IMECE2008, 2008 ASME International Mechanical Engineering Congress and Exposition, October 31-November 6, 2008, Boston, Massachusetts, USA

109.   Mahdi Moghimi Zand, S. Ahmad Tajalli, Mohammad Taghi Ahmadian. “Studying Dynamic Pull-in Behavior of Microbeams by means of the Homotopy Analysis Method”, Proceedings of IMECE2008, 2008 ASME International Mechanical Engineering Congress and Exposition, October 31-November 6, 2008, Boston, Massachusetts, USA

110.   M.T. Ahmadian, A. Taghvaeipour, M. Bonakdar. “Application of A New Cylindrical Element Formulation in Finite Element Structural Analysis of Fgm Hollow Cylinders”, Proceedings of IMECE2008, 2008 ASME International Mechanical Engineering Congress and Exposition, October 31-November 6, 2008, Boston, Massachusetts, USA

111.    Elyas Ghafoori, Mohammad Taghi Ahmadian. “Dynamic Response of a Two-dimensional Stationary Framework Subjected to a Moving Carriage Hoisting a Swinging Object Using Finite Element Method”, CSME-SCGM 2008, Canada

112.   Elyas Ghafoori, Mohammad Taghi Ahmadian. “Calculating the Dynamic Response of a Multi-Spans Bridge Subjected to a Moving Vehicle Considering Acceleration and Deceleration”, CSME-SCGM 2008, Canada

113.   M.T. Ahmadian, R.A. Jafari-Talookolaei, E. Esmailzadeh. “Multi-Span Laminated Composite Beam Traversed by Moving Non-Rigid Masses”, American Institute of Aeronautics and Astronautics (AIAA)2008

114.  Sakhaee-Pour, M.T. Ahmadian, A. Vafai. “Finite element technique to mimic vibrational behavior of single-walled carbon nanotubes”, computer Design (CDES'07), las vegas, June 2007

115.  M.T. Ahmadian, A. Asempour, A. Mobini “Load distribution identification of plates using neural networks”, CANCAM 2007, Toronto. Apr 2007

116.  M.T. Ahmadian, M. Paak, T. Pirbodaghi, S. Hassanpour. “Vibration Analysis of a Composite Timoshenko Beam with Actuating Layers Under Motion of a Uniformlly Traveling Partially Disributed Mass”, Proceedings of IMECE2007, 2007ASME International Mechanical Engineering Congress and Exposition, November 11-15, 2007, Seattle, Washington, USA

117.   M.T. Ahmadian, M. Paak. “Design and analysis of a novel peristaltic micropump”, 15th Annual Conference on Mechanical Engineering (ISME), May 2007, Tehran, Iran

118.   Sakhaee-Pour, M.T. Ahmadian, A. Vafai. “Nanoscale Vibrational Behavior of Single-Layered Graphene Sheets”, Proceedings of IMECE, 2007 ASME International Mechanical Engineering Congress and Exposition, November 11-15, 2007, Seattle, Washington, USA

119.   M.T. Ahmadian, T. Pirbodaghi, M. Pak. “Natural Frequencies of Stiffened and Unstiffened Laminated Composite Plates”, Proceedings of IMECE2007, 2007 ASME International Mechanical Engineering Congress and Exposition, November 11-15, 2007, Seattle, Washington, USA

120.   M.T. Ahmadian, M. Bonakdar, T. Pirbodaghi. “Spin softening effect in rotating hollow cylinders using a newly designed cylindrical superelement”, 21th Canadian congress of applied mechanics (CANCAM), toronto, june2007

121.   M.T. Ahmadian, T. Pirbodaghi, M. Fesanghari. “Dynamic Response of Rectangular Cross-Ply Laminated Composite Plates under Moving Mass”, 21th Canadian congress of applied mechanics (CANCAM)'', toronto, june2007

122.   M.T. Ahmadian, T. Pirbodaghi, M. Bonakdar. “Free Vibration Analysis of Cross-Ply Laminated Composite Plates Subjected to Axial Load on Elastic Foundation”, 21th Canadian congress of applied mechanics (CANCAM)'', toronto, june2007

123.   M.T. Ahmadian, A. Tajali, M. Pirmoradian. “Analysis of Thermoelastic Damping Effect On Rectangular Microplates Vibration”, 21ht Canadian congress of applied mechanics (CANCAM)'', toronto, june 2007

124.   M.T. Ahmadian, M. Paak. “Design and application of peristaltic micropumps for drug delivery”, 26th Annual Canadian biomaterials society mee, ontario (2007)

125.   M. Bonakdar, M.T.Ahmadian, M. Moghimi Zand. “Calculation of geometric matrix for a newly designed cylindrical superelement”, 21th Canadian congress of applied mechanics (CANCAM), toronto, june 2007

126.   M.T. Ahmadian, M. Moghimi Zand, M. Bonakdar. “Vibrational Analysis of Multi-Layer Microplates Considering Nonlinear Squeeze Film Damping and Electrostatic Actuation”, 2nd Asia-Pacific Int. Conf. on Comp. Meth. in Engrg (ICOME 2006), Nov. 14-16, 2006, Hefei, China

127.   M.T. Ahmadian, M. Bonakdar, M. Moghimi Zand. “Application of a newly designed super element to modal analysis of hollow cylinders”, Las Vegas, Nevada, June 2006

128.   M.T. Ahmadian, M. Moghimi Zand, M.M. Nasr Azadani. “Vibration Analysis of Timoshenko Beam Carrying Non Uniform Partially Distributed Moving Mass Using Mode Summation Method”, 14th Annual (International) Mechanical Engineering Conference – May 2006, Isfahan University of Technology, Isfahan, Iran

129.   M.T. Ahmadian, M. Moghimi Zand, M. Bonakdar. “Vibrational Analysis of Multi-Layer Microplates Considering Nonlinear Squeeze Film Damping and Electrostatic Actuation”, COMPUTATIONAL METHODS IN ENGINEERING, 2nd Asia-Pacific Int. Conf. on Comp. Meth. in Engrg (ICOME 2006), Nov. 14-16, 2006, Hefei, China

130.   M.T. Ahmadian, Hoseinali Borhan, M. Moghimi Zand. “Dynamic Finite Element Modeling of Electrostatical Actuated Micro Structures Considering Squeeze Film Damping Effect”, Proceedings of IMECE2006, 2006 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2006, Chicago, Illinois, USA

131.   M.T. Ahmadian, M. Moghimi Zand, M. Bonakdar. “Pull-in Analysis and Transient Behavior of Multi-Layer Microplates under the Actuation of Nonlinear Electrostatic Force”, Symposium on mechanics of slender structures, University of Northampton, England

132.   M.T. Ahmadian, A. Mobini. “Online Prediction of Plate Deformation Under External Forces Using Neural Networks”, ASME International Mechanical Engineering Congress and Exposition, IMECE06, Chicago, Illinois, Nov 2006

133.   M.T. Ahmadian, T. Pirbodaghi. “Dynamic Analysis of Orthotropic Laminated Composite Plates Under Axial Load On Elastic Foundation”, ASME International Mechanical Engineering Congress and Exposition, IMECE06, Chicago, Illinois, Nov 2006

134.   M.T. Ahmadian, M. Bonakdar, M. Moghimi Zand. “Application of a newly designed cylindrical superelement to vibration analysis of laminated hollow cylinders”, Symposium on mechanics of slender structures'', University of Northampton, England, September 2006

135.   H. A. Borhan, M.T. Ahmadian, M.R. Movahedi. “Dynamic Finite Element Modelling of Coupled Domain MEMS Devices with Electrostatic and Squeeze File Effects”, Third AUS international Syposium on Mechatronics AUS-ISM06, AUS, Sharjah, U.A.E, 18-20 April 2006

136.   Amin Mehrabian, M.T. Ahmadian. “Effect of Actuation Frequency On the Performance of Diffuser Micropumps”, Proceedings of ASME ICNMM2006, 4th International Conference on Nanochannels, Microchannels and Minichannels, June 19-21, 2006, Limerick, Ireland

137.   M.T. Ahmadian, Amin Mehrabian. “A New Model for Dynamic Analysis of Side Mounted Diffuser Valve Micropumps”, Proceedings of ESDA2006, 8th Biennial ASME Conference on Engineering Systems Design and Analysis, July 4-7, 2006, Torino, Italy

138.   M.T. Ahmadian, M. Moghimi Zand, H. Borhan. “Dynamics of Multi-Layer Microplates Considering Nonlinear”, Proceedings of IMECE2006, 2006 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2006, Chicago, Illinois, USA

139.   M.T. AHMADIAN, R.A. Jafari-Talookolaei. “A new approach in finite element modeling of generally laminated composite eams”, Proceedings of IMECE2006, 2006 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2006, Chicago, Illinois, USA

140.   M. T. Ahmadian, M. H. Saidi, Amin Mehrabian, M. Bazargan, S. D. Kenarsari.     “Performance of Valveless Diffuser Micropumps under Harmonic Piezoelectric Actuation”, Proceedings of ESDA2006, 8th Biennial ASME Conference on Engineering Systems Design and Analysis, July 4-7, 2006, Torino, Italy

141.   Mohammad H. Saghafi, Mohammad T. Ahmadian, Hadi Salehi, R. Monazami, Azad Q. Zade. “Propose and characteristics study of a new actuation method for micropumps, using membrane buckling”, Proceeding of NANO2005 - Integrated nano systems: Design, Synthesis & Application, 15-16 September 2005, Berkeley, California, USA

142.   Mohammad Taghi Ahmadian, Amin Mehrabian. “Design optimization by numerical characterization of fluid flow through the valveless diffuser type micropumps”, IMEMS Conference 2006, Sangapour (2005)

143.   R. Sharifi Sedeh, M.T. Ahmadian, A. Elahi, R. Saeidpour Azar. “Application Of Different Control Approaches To The Design Of Semi-Active Suspension Systems”, 13th Annual (International) Mechanical Engineering Conference – May 2005, Isfahan University of Technology, Isfahan, Iran

144.   M.M. Halili, A. Delnavaz, M.T. Ahmadian. “Dynamic Modeling of Moving Load on a Rail Track Wait a Visco-Elastic Foundation Using Finite Element Method”, 13th Annual (International) Mechanical Engineering Conference – May 2005, Isfahan University of Technology, Isfahan, Iran

145.   M.T. Ahmadian. “Dynamic Strategy Formulation in Aviation Industry”, Air Transport Industries Management in IRAN, 19-20 Jan 2005

146.   M.T. Ahmadian, R. Sharifi Sedeh, R. Abdolah pour. “Analysis of Brain Deformation Under Blood Vessel Rupture Using Finite Element Method”, Universal Conference Management Systems & Support, San Diego - Las Vegas, June 2005

147.   M.T. Ahmadian, R. Sharifi Sedeh, R. Abdolah pour. “Car Semi – Active Suspension System in Reduction of Harmful Effect of Road Excitation on Human Health”, Universal Conference Management Systems & Support, San Diego - Las Vegas, June 2005

148.   M.T. Ahmadian, R. Sharifi Sedeh, R. Abdolah pour, Kazemi. “Adaptive Fuzzy Controller Using Gain-Scaling Method for Autopilot Ship Steering with Nonlinear System”, 13th Annual (International) Mechanical Engineering Conference – Isfehan, Iran 2005

149.   M.T. Ahmadian, M.S. Zangeneh, S.R. Ghoreishi. “Nonlinear Forced Vibration Analysis of Rectangular Plate Using Elements”, XXI International congress of Theoretical and Applied Mechanics, Warsaw, Poland, August 15-21, 2004

150.   M. Sharafaty Zangeneh, M.T. Ahmadian, Seyed Reza Ghoreishi. “Using Super Element and P-Approximation for Free Vibration analysis of Composite Plate”, ASME International Mechanical Engineering Congress, November 13-19, 2004, California

151.   M.T. Ahmadian, M. Moghimi Zand. “Compensating frequency response of the sensors in blind separation of sources'', IST2001, Azar 1380, Tehran, Iran

152.   M.M. Rezaei, M.R. Movahhedy, M.T. Ahmadian. “Dynamic contact modeling of spindle- holder interface in milling”, 17th annual international conference on mechanical engineering, May 19-21, University of Tehran, 1388

153.   Mohammad Taghi Ahmadian, Hamid Moeenfard, Tohid Pirbodaghi. “Static Deflection of Electrically Actuated Microplates, an Extended Kantorovich Approach”, 16th. Annual (International) Conference on Mechanical Engineering-ISME2008, May 14-16, 2008, Shahid Bahonar University of Kerman, Iran

154.   S.Ahmad Tajalli, Mostafa Pirmoradian, Mohammad Taghi Ahmadian. “Dynamic pull-in analysis of Circular and Rectangular microplates under the squeeze-film damping effect'', 16th. Annual (International) Conference on Mechanical Engineering-ISME2008, May 14-16, 2008, Shahid Bahonar University of Kerman, Iran

155.   M.T. Ahmadian, R. Sharifi Sedeh, R. Abdollahpour. “Development of Hyper-Viscoelastic Modeling for Tumor Growth in the Liver Using Genetic Algorithm and Finite Element Method'', Universal Conference Management Systems & Support, San Diego - Las Vegas